I'm going to need a bigger...
-
Cool chopper Tony. Am I right in thinking that the grip is rubberised? If so, my understanding is that it's to protect against electric shock. Seems appropriate somehow.

-
:D
I found this on another site, they were also issued to firemen maybe by a different maker but it says about the rubber here

The 'ARPAX' was manufactured by the Chillington Tool Company Limited of Wolverhampton and is notable for its rubber handle, subject to a patent applied for in June 1938 and finally granted in December 1939.
Being encased in a tough rubber, the handle was claimed to be less liable to catch fire or break than the traditional wooden types, and would also protect the user from potentially fatal shocks if he or she happened to accidentally cut through electric cables. To this end, moulded into the handle was the comforting phrase 'TESTED 20.000 VOLTS'.

-
Good info mate. Don't go putting it to the test though, OK?

:D
-
@sparky415 said:
Who pissed you off today?
just the girlfriend - i have a spare ket but thats not as dramatic

-
@sparky415 said:
This was made between 1930's to the late 60's
It's so pitted the only markings I can make out is the number '55' but these look to me like they were stamped after it was made :-
I have tidied up the badly sharpened edge and point, still don't know if I will re-handle it yet :D
Nice job Tony.
Leave the handle will ya..
8) -
This was made between 1930's to the late 60's
It's so pitted the only markings I can make out is the number '55' but these look to me like they were stamped after it was made :-
I have tidied up the badly sharpened edge and point, still don't know if I will re-handle it yet :D
Nice job Tony.
Leave the handle will ya..
8):-\ :-\ :-\
-
But


-
@sparky415 said:
But


That's nice too.. :o

-
;) :D :-\ :ahhh
-
Nice chopper mate 8) 8)

I like those hollow rivets 8) 8) 8) -
Its not mine, its a picture I copied (but I can't find who from ::) )
So I don't know if I should do the same sort of thing with mine or not :-\ (I don't think I could do the rivets like that) -
Nice axe Tony. If you rehandle it what are you thinking about using?
-
I was thinking about some walnut

-
That would look good.
-
I think so if I don't bugger it up

I am still in two minds as the ax is almost history :-\ if there was a stamp on the side I would not think about doing it

-
@sparky415 said:
Its not mine, its a picture I copied (but I can't find who from ::) )
So I don't know if I should do the same sort of thing with mine or not :-\ (I don't think I could do the rivets like that)Chicken
:D :D :DThe modded one looks like it almost has a glass breaker at the base of the handle
, the owner probably did that
.Tough one on the handle mate
. The modded ones new handle looks a little short


That looks nice Tony
.
Tony how thin do you get your wooden scales , my little Italian project I have got it down to around 3mm tapered to the bolsters & it still 'feels' too thick :ahhh :ahhh. I do not want the feckers too break :ahhh :ahhh :ahhh -
Mine are about 3mm tapering down at the ends but I don't think it matters how thin you go as the glue and liners are holding everything together

(Reply no 3 /topic/23819 )
-
Although I have a lot of toys I don't get to play with or try them out a great deal
The GF wanted some trees thinned out in her garden so I took this lot to play with (aswell as my reciprocating saw ;) )I was in two minds about using the Kukri as the handle has developed a split but thought I should give it a chance even if it was going to break

I also took my cheap ax, stick chopper and machete

I was very surprised how well the Kukri performed bearing in mind it was a cheap tourist one, the handle has held up very well so I am going to ignore the split that appeared over the winter


The cheap ax didn't do too bad but its more of a splitter than anything else

The machete coped quite well with 2” or 3” branches but its a bit too flexible and not really designed for wood this thick :-\

My re handled stick chopper I used to split kindling, the only problem is the lovely handle I made is too thin and round for comfortable use so I will re handle when I can be bothered with it ::)

Sausages on sticks



Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
