Swisstools the different models
-
Hello MultiMat,
We just know that the order was placed by the French Army, I haven't saw one yet.
As france is part of the NATO It is highly possible that they will get an number. It is also highly possible that they get "Armée Française" on it ! -
@Dunc said:
From what I know some years back the Australian Military were looking for a Multitool and held trials , Vic submitted the Std Swisstool and I know LM put up the Supertool 200 but I don't know what other ( if any ) were also in the trial .The Swisstool was choosen :D It does seem a very popular choice among Armies . They must of read my review
::) ::) ::) :D
-
@LightFR said:
Hello MultiMat,
We just know that the order was placed by the French Army, I haven't saw one yet.
As france is part of the NATO It is highly possible that they will get an number. It is also highly possible that they get "Armée Française" on it !Thanks mate
.Time to get friendly with some one in the Army mate
:P :D :D :D -
I've just asked on the Vic Facebook page if the Norwegian issue St carraries the same numbers as the Aussie one .
-
I would very much like a cap crimper model

-
Re military markings, based on the equipment I was issued with during my service, it is likely the Swisstool will have some specific code/marking, an inventory number at the very least (to avoid them bein nicked) and probably no brand. I think I have a pic of the Swisstool in a French knife mag and that it had the Felin logo stamped on it (a kind of tiger or puma). I'll have a look.
-
I managed to find this: jackgers.blogspot.com/2010/11/30-000-swiss-tool-for-french-army.html
The picture is not very good but you can guess that there is actually the Victorinox markings (stamped) on one handle and on the other handle the Felin logo. Cannot see a C4 punch but the plier head is shaped as a crimper. -
@SLT.AMBEMC said:
I managed to find this: jackgers.blogspot.com/2010/11/30-000-swiss-tool-for-french-army.html
The picture is not very good but you can guess that there is actually the Victorinox markings (stamped) on one handle and on the other handle the Felin logo. Cannot see a C4 punch but the plier head is shaped as a crimper.30 000 Swisstools :o thats more then Chako has :D
I don't think it has a dedicated C4 punch . It looks like a Standard Swisstool but with a Cap Crimper plier head .
-
HI
I have some information on the Black oxide what it is, and yes from :)Victorinox, i have a few tools now and the latest was a used SwissTool Black Oxide 3.0323.3. (standard functions)
B.oxide:
Bluing (black oxide or blackening) is a passivation process and is named after the blue-black appearance of the resulting protective finish. It is used to add mild corrosion resistance and for appearance. One of its advantages over other coatings is its minimal buildup. Bluing, being a chemical conversion coating, is not as robust against wear as plated coatings, and is typically no thicker than 2.5 micrometres (0.0001 inches). The Victorinox blackening process is appropriate for stainless and high alloy steel.
-
NM, Nice, but there is not much mystery in the BO finish; However; can you get them to spill the beans (or give just a little more info) on the coating/plating/material-transform used on the Spirit RT?
Thanks for getting us info and comments from Victorinox, on all sorts of topics.
-
Something a little different; a Black Bit-Kit. Included with a BMW Motorcycles branded SwissTool - X kit.
-
Speaking of black Swisstools and motorcycles, another variation is this Aprilia Black Iron 23 tool 8)

-
I wish Vic would make a version of the Spirit with a plain edge pen knife blade, wood saw, scissors and the belt cutter from the SwissTool. Basically the Spirit X with the metal file replaced with the belt cutter.
I own a SwissTool and a SwissTool RS. I like the RS much better. -
I really like the tools in black finish casing! SwissTool especially looks good in black.

But I think that in every multitools must be present scissors. This is a very important option, in my opinion. -
Yes the black ones are very cool. The black bit holder looks better than the red one too!
-
What is the different models of the spirit ??
-
Whats a good price for a "Standard" and where can I get one...not a fan of scissors.
-
So how about the black swiss tool? Did it come in all those configurations or just one??
I would also like to know?
I've only ever seen the Std models in BO and the std with cap crimper , I wonder if they done any others
-
I have got my first SwissTool (4.0883.L). I am very happy with it. But two things are bugging me. First, it‘s plier head has no markings on it, so it is not similar to any of these examples. I almost started thinking that I have a fake. But then I found that one member has the same looking one (so either we both have fakes, or we both don’t). Second, ruler numbers on one side look bold, and on another side look normal. I took a few images, I hope you can see the difference.
So two questions: is it fake and is it normal to have a different type of numbers used on the ruler?


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login