Project Skeletool almost done..... (WARNING: Pic Heavy)
-
Amazing work Evil.. :o :o 8)
If you ever decide to do a nailnick version, please drop me a PM.. ;) :D -
Awesomely Evil craftsmanship >:D
But why no fancy Skele-holes?
-
@AHB said:
Amazing work Evil.. :o :o 8)
If you ever decide to do a nailnick version, please drop me a PM.. ;) :DThanks AHB
I'll keep you in mind should I ever make a nail-nick version. It would have saved me quite a few steps.....@threeme2189 said:
Awesomely Evil craftsmanship >:DBut why no fancy Skele-holes?
*Thank you threeme. Few reasons, actually. First off, for me personally, from a design point of view, I never liked the half circle thumbhole Leatherman put on the original blade, especially in relation to the circular holes. The first blade I mocked up for this project, did have similarly placed holes, but didn't flow with this particular thumbstud as well as I had wanted. Also, some had thought, "hey cool, you modified a Leatherman blade" since it looked too similar. I wanted it to be unmistakeable and undeniable that this was a custom blade. I have a D2 version underway for my beater Skeletool and have been playing around with different hole designs that will compliment a different thumbstud than the one on this blade. Visually, IMHO, the blade looks a lot more stout and sturdy without holes, which was what I set out to accomplish with this particular project to begin with. Anyway, I hope this helps.....
* -
Oh shiny. Must have. Must use. Must get it dirty then shine it up again.

-
Yep that is my favourite Evil mod 8) 8) 8) 8)
.I wish LM would make a SUPER SKELETOOL
:D :D -
Amen to that!

-
Fabulous work Evil.
That thumbstud must have been especially challenging. :) -
I can only stare in covetous awe. :) The new blade looks amazing, and it sounds like it feels good to. Sounds like you're down to the handles, pliers and bit holder for original parts.
If anyone from Leatherman is reading this, go to the boss, and tell him that whatever Evil wants, Evil gets, and hire this man.
-
The charge is no premium tool compared to this
-
I`m almost speechless so...... 8) 8) 8) 8) 8) 8) 8) 8)
-
Now see if you can squeeze some ST300 pliers in there!
:D -
This is waaaay to cool!! SUB ZERO!!
Hat down!!

-
http://forum.multitool.org/Smileys/default/gimme.gif frikin AAAAAAAAAAAAAAAAAAAA++++++++++++++++++++++ why are u not part of the LM design/build team already ??? love it to bits man.
-
Posted on the LM facebook page.. ;)

-
AHB,
Which leatherman group are you posting it on?
-
It is on the Leatherman Facebook page here is the link
http://www.facebook.com/leathermanusa
It is a great facebook page take a peek if you dare.
Ray -
@rayraychil said:
It is on the Leatherman Facebook page here is the link
http://www.facebook.com/leathermanusa
It is a great facebook page take a peek if you dare.
RayIt's a bit of a Fanboy page, but it gets the word out.. ;)

-
@tattoosteve99 said:
Oh shiny. Must have. Must use. Must get it dirty then shine it up again.
No worries, it will see much use and abuse ;)
@MultiMat said:
Yep that is my favourite Evil mod 8) 8) 8) 8)
.
I wish LM would make a SUPER SKELETOOL
:D :DThanks buddy. Did you ever make use of that airbrush?
@J-sews said:
Fabulous work Evil.
That thumbstud must have been especially challenging. :)Thanks Bob
A lot of angles and curves, for sure :)@ironraven said:
I can only stare in covetous awe. :) The new blade looks amazing, and it sounds like it feels good to. Sounds like you're down to the handles, pliers and bit holder for original parts.
If anyone from Leatherman is reading this, go to the boss, and tell him that whatever Evil wants, Evil gets, and hire this man.Thank you ironraven. After having lubricated it and breaking it in, I can honestly say it feels smoother than my other folders now.....
@scrappy said:
The charge is no premium tool compared to thisThank you scrappy.....
@David said:
I`m almost speechless so...... 8) 8) 8) 8) 8) 8) 8) 8)Hmmm... just almost... look below, maybe that will help ;) (I am just kidding)
@Nikos said:
Now see if you can squeeze some ST300 pliers in there!
:DDon't think the thought didn't cross my mind lol. The ST300 plier head barely fit into my Surge.....
@edcgear said:
This is waaaay to cool!! SUB ZERO!!
Hat down!!I am guessing that sub zero and hat down are a good thing lol. Thank you edcgear.....
@rayraychil said:
http://forum.multitool.org/Smileys/default/gimme.gif frikin AAAAAAAAAAAAAAAAAAAA++++++++++++++++++++++ why are u not part of the LM design/build team already ??? love it to bits man.Thank you rayraychil.....
@AHB said:
Posted on the LM facebook page.. ;)
"Evil510 over at MT.O just finished his Custom Skeletool and it's frickin awesome.. :)"Thanks AHB, I never did get into the social networking thingy. You spoke a little too soon though. See below..... ;)
*Hey gang. Evil here yet again. When I first set out to do this project, the original plan was to put a ratchet in the carabiner area. With the creation of my inline ratcheting bit driver to fit the large bit driver of this and most of my other Leatherman tools, it would have been redundant to create a ratchet for this project. The alternate plan was to install a LED light system but I simply never got around to doing so. I used my Skeletool, as is, for about a year as my EDC. With my recent addition of the new knife blade, it kind of persuaded me to make the effort to finish the carabiner area.....
~ evil ~
The Multitool gods looked upon Evil's Project Skeletool and said... let there be LIGHT!!!*

Rather than going through the trouble of making a new housing from scratch, I decided to make use of the carabiner cover that I had already been using for over the past year. I machined discs to fill the existing holes. Wanting a nice, clean interface, I made the largest one on the front side the on/off button for the micro pressure switch. For the light source I used two 3mm ultra white, water clear LED's @ 20,000mcd each. Powered by common alkaline button cells. The whole unit is self-contained and can be moved from one Skeletool to another by simply enlarging the hole where the original spring clip resided to accomodate the mounting bolt. Filled with an epoxy resin to withstand all of the shock and vibration of using the hammer. To compliment the rest of the tool I went with contrasting finishes: polished finish for the housing and brushed finish for the discs. Subtle, but, more apparent from different angles. A few close-up shots.....

A few random full-view shots from different angles so you can better see the brushed finished on the cover discs vs. the polished housing.....

A few test shots. Bright enough to make you want to turn away if you stare at it for a few seconds. These photos don't do it justice. I was using my phone. It doesn't show the light flooding as well as it does in real life. You can easily navigate a room in total darkness. Not bad for such a tiny thing. If I get a chance, I will break out my real camera that will show exactly what I am seeing on my end.....

-
Very cool, but how is that going to hold up when the hammerin' starts? :ahhh
-
@Mr. Whippy said:
Very cool, but how is that going to hold up when the hammerin' starts? :ahhhThat's why the whole thing is filled with an epoxy resin :-) There aren't any moving parts to fail. To know me is to know I thoroughly test all my mods. I'm gonna beat the crap out of it today ;-)
Sent from my Evil Android via Tapatalk Pro
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login