My new Flik and MP700 (Pic Heavy)
-
@jekostas said:
Nice pics. The one thing I'd say is that I'd hesitate to call the Flik a budget tool - it was really meant to compete with the Wave and up until last year had a substantially higher MSRP and street price. It's still around the same price as a Blast or SuperTool 300.Ah, OK

I must have got mine for a real steal then, I paid little more than the price of a Suspension and at that price I'm happy with the overall quality (or will be once I've fixed the pawl). I've just had a quick snoot online and yes, there are places selling them for as much as a Blast :-\ I'd say (even putting the pawl issue aside) the ST300 is certainly worth more than a Flik IMO - and I would not say it is a direct competitor for the Wave. If that was the plan it does fall way short. Still a reasonable tool though IF you can get one at a reasonable price - but not ST300 money I'd say. If I'd have paid that and got this, I'd have felt robbed.
@J-sews said:
Have you any copper wire laying around? If so, what are your thoughts about bypass style cutters -versus- anvil style cutters?
:DI just had a quick snip of some 7 strand neutral, multicore earth and also the wire from a piece of steel armoured cable. The anvil cutters do have a little daylight between them and did need a slight twist and pull to seperate them, but I've used far worse dedicated pliers before. The bypass cutters on the 700 were better but not "clean". The Wave that was used to harvest the test pieces in the first place far out performed them with a clean snip of all three.
Looks like I'll NOT be carrying the 700 till I've fixed the spring issue though. as I clipped through the cables the knife blade and flat drivers popped out to say hello :( Seems like both of these will be relegated to the "awaiting modification/repair" pile.
Pity :-\
-
Hmmm, well hopefully they won't be in that pile for too long. :-\
Here's that disassembled Flik pic by the way: :)

-
@J-sews said:
Hmmm, well hopefully they won't be in that pile for too long. :-\I hope so too

Thanks for the pic Bob
Getting the plier heads out looks straightforward (muck like the 600 DET mod I did before), but getting the pawls out looks more interesting from your pic. I hope to get on this very soon -
Certainly does ;)
Doesn't play so well going back together though >:(
(Those pins. pawls and springs are not my friend right now)Time to stop and do other things today unfortunately, but I'll come back to it in a day or so now I've figured out what I'm doing

-
A little update here. I had a bit of a fiasco with Gerber UK customer support (details posted elsewhere), but a ***very * ** helpful chap in the UK managed to sort me out with my issues on the MP700. I no longer have a tool with slight plier movement and a missing spring, instead I now have ***three * ** fully functioning MP700s, all of which feel better made than the original - which other than the spring issue I was actually quite happy with.
The tighter fit and finish means that these items now cut wire very cleanly, and all the other tools deploy very smoothly and securely. If they got their standards of manufacturing this right more often, Gerber would certainly be higher up the rankings in discussions on here. These feel like a multitool ***should * ** feel in operation - I'm hard pressed to say whether these or the recently acquired Fit are the best made Gerbers I've ever handled.
Big smile!! :D
The MP700 is the first multitool I've ever bought duplicates of, firstly because I really do like the tool for moderate duty tasks, but secondly because I don't trust Gerber to get me back up and running should I have a problem with them.
The Flik is still in dock. I'm determined to keep this away from Gerbers CS Dep't too ::) , and adhere the two pawl sections together to ensure they cannot flare and jam in future. I did start doing this when tired a while back and used some very strong adhesive to join them ... but my alignment was ever so slightly off which means I can't get the pin back through

Thankfully I have more than enough MT's for this to be shelved until I have more free time to fix this properly. Yeah, it's a cop out - but multitools are supposed to be all about convenience, right? ;)
-
Three now! That's just greedy I say, don't fancy swapping one for a PPP or a Skeletool do you? ;)
-
That's not greedy - just good planning ;) :D :D
If you wan't to swap your plain edged Skele for my COMBO edged Skele ... I might have more chance of finding someone to swap it for an Octane :P

-
Final Update:
The MP700 has become one of my favourite pocket carried multis. It's not been worked too hard, but has performed well at work and at home. I'm beginning to think that Urban Legend might be a more fitting name than I first thought. At one point I thought that a file or an awl instead of the tweezers might have been better, and perhaps it might but I don't mind the tweezers at all really. They're not the easiest to use but they don't fall out and get lost right before the time you really need them.Still need to thin down that smallest driver though so it will actually fit in smaller screws.
The Flik has gone - traded away. A semi-hurried and semi-botched attempt was made at a repair by me, enough to know it would have worked great if I just tweaked my methods slightly ... but to be honest I lost interest in it. Yes it was an outboard tool with OHO pliers, which for me should have been excellent ... but I didn't gel with it like I did the MP700. Maybe it was lack of faith in the pawl mechanism (even once repaired), maybe it was the weight, maybe something else entirely.
The scissors were nice, and with a longer edge (towards the pivots) the blades would have been very nice too. A file instead of saw and longer stumpies would also have improved matters for me, but then I'm sure others may rather have a saw than a file.
I'm glad I gave both these tools a try, despite all the hurdles and brainache they gave me up till this stage. It is a shame I couldn't get on better with the Flik but to be honest I don't think it could compete with my Vic Spirits and a couple of other options. It didn't offer much in the way of incentives for me (personally) to grab that ***instead *** of something else, but for someone with a different tool selection it might be a different story. The MP700 on the other hand is different enough with it's sprung pliers, replaceable cutters, cute little OHO blade, tweezers and rubberised handle grips to be a valid alternative without being a direct comparison, and I think the MP700 will be a part of my rotation for quite some time.
-
This thread has seriously gotten me thinking about picking up both of these tool, but sadly I've got other things that I have to buy first. :-\ Ah well, when money allows I'll look again. Cheers for the thoughts mate.

-
You nabbed one of those True Utility minimultiwhateveritwas jobbies you were sniffing over yet, or is that still on the ever increasing wish list too?
Oh, BTW if you find any decent alternatives to 7dayshop for that kind of gear too (the TU stuff), gimme a yell. I tried to place an order with them but you they'll only ship to billing address and I pretty much have eveything shipped to my work addy these days. Sent them a message to check it wasn't be being dim, and they confirmed - billing address only :(
-
Nope, didn't get one yet though it is on the wish list. Right now I'm putting money into some new winter boots and a little trip up North to test them, so MT spending is zilch. :( Still I have high hope on the boots and and confident I'll have the weather to justify them *very *soon. ::)
http://uk.thenorthface.com/tnf-uk-en/men-s-chilkat-ii-boots.html?colour=13839
-
They look a bit good mate.

I've dug my Jack Pike waterproofs and boots out ready for the onset -
These one's?
they look a bit good too. 
-
Them's the fellers
A bit heavy for long walks, but very warm and robust.Looks like they might have discontinued the waterproofs I got from them though - well the trousers at least the Countryman Jacket is still there. It's a great ensemble for keeping in the boot of the car for those times where snow stops progress and you've got a long trudge through snow and sludge ahead of you. Doesn't seem that long since last time. Weren't we supposed to get a summer inbetween?

-
Yeah.......summer.
I think I've heard of them before, I wonder when someone will get round to importing them here? :-\ -
I look for more function than form, but that black Vic. Spirit is the most beautiful tool I've ever seen.

-
:D :D Cheers darth_guy

They are quite nice aren't they :D Which one in particular? The BO (all black) or the RT (stainless tools)?
When it comes to form and function the Spirit models excel at both, and don't let anyone tell you otherwise :P
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login