Paladin PT-540
-
not just one blade, but two blades (one straight and one serrated) on the outside position of the handles with thumbstuds and powerassist, and on the other handle rig up a very long bladed saw and some big usable scissors with the same setup??
Like a Surge you mean? ::)
Well yes and no. All the tools accessible without opening the pliers, with the blades, scissors and saw all being powerassisted.
-
@Mike D said:
Well yes and no. All the tools accessible without opening the pliers, with the blades, scissors and saw all being powerassisted.Seems like one flaw in the PowerAssist is that there are only two blades in the one entire handle. :(
Must be the powerassist mechanism takes up a lot of space?
-
I always thought AO blades were best when the knife could be in hand and situated the way you want it within 2 seconds or so...the Powerassist needs to be unsheathed, then you have to feel around for the side with the blades, then you have to know which blade you're going to deploy...
It's a good idea, but not good enough to forfeit a handle full of drivers/an awl/bit driver/etc...
-
I just joined this forum and, wow, what a great resource! All the questions I asked Supratentorial about regarding the PT-540 is answered in this thread. Greta pics too! I was glad to be informed that the blades are not any longer than on the Powerlock - that's unfortunate. Its still a very impressive MT! I also noticed only one square tool cover stop on Supratentorial's PT-540 handles and two on J-sews PT-540 so it shows that they're slowly improving it as they go. If only they would design a tool lock good enough to make all the tools accessible with the handles closed. The current SOG/PT locking mechanism apparently doesn't provide enough locking power so safety is an issue (don't want the tools, especially a blade closing on some fingers!) However, Victorinox made a good enough lock so their tools open without opening the handles. Gerber even did it with their Freehand. Now its SOG's turn.
-
Good eye for small details there Carl. Must say I agree with you on where SOG should focus their efforts. Everyone agrees that they make fine quality tools, better in many respects than their competitors. Yet most folks seriously dislike the number of steps required to access a PowerLock knife blade.
If only SOG could work on improving that a bit....... :-\
-
Yeah, I totally agree. SOG makes a very fine Extraordinary ( no pun intended!) multi-tool. But the design is old old old technology. Seriously, look at the locks-how simple are they, or the 'doors' just to cover up the old technology! I personally think SOG can make some of the best tools! But, they have to stop with the dated designs!!!
-
Just out of curiosity, has anyone here spoken with SOG about their dated locks? What was their response? Does SOG know that their design priority needs to be placed on their locks rather than on nice but non-essential features such as power-assist, etc. ?
-
@carl said:
Just out of curiosity, has anyone here spoken with SOG about their dated locks? What was their response? Does SOG know that their design priority needs to be placed on their locks rather than on nice but non-essential features such as power-assist, etc. ?For better or for worse, SOG placed their design priority on locks last year. The result was "piano locks" like the ones shown below.
(picture from SOG website)

-
Agreed that they needed to upgrade the locks, but I hope they come up with a better steel for the cutting edge on the now powerplay. Unfortunatly I feel that the steel used now is really substandard.(not that tools are known for really having great steel.) Vic, and leatherman really did themselves a favor by sticking with good steel on hte Vic, and great steel on the leatherman in 154C
-
For better or for worse, SOG placed their design priority on locks last year. The result was "piano locks" like the ones shown below.
(picture from SOG website)
[/quote]Oh well (sigh).........I guess we're in for inside opening tools rather than outside openers for a good while to come.
-
I'm wondering if there are some design patents on it that prevent everyone doing it?
-
I was wondering the same thing. After all, there's only so many different ways to design a lock while keeping it compact yet effective. I was hoping the Paladin folks could design something since they seem to have some influence on their version of MTs.
-
Just saw a previous Leatherman design contest. If SOG initiated one for their locks to open their tools from the outside, I would like to participate. Is this just a dumb idea, an unsolicited offer to SOG that they don't want? I wonder if I should email them and find out. Any moderators here have any opinion on this? thanks
-
SOG usually keeps their design creativity pretty close to home. Hopefully they will realize the advantages of outside opening blades with the advent of the PowerAssist, and focus some of their expertise on flipping the handles around on the rest of their tools. Outside opening blades on SOG's are an idea that is long overdue.
(Anything to get rid of those silly flaps on the handles!) :P
-
I might be getting a PT-525 soon, but what I really want is a 510.
-
@J-sews said:
Hopefully they will realize the advantages of outside opening blades with the advent of the PowerAssist, and focus some of their expertise on flipping the handles around on the rest of their tools.(Anything to get rid of those silly flaps on the handles!) :P
We can only hope...........
-
Either I'm looking in all the wrong places or this MT is really hard to attain from European retailers :(
Normally if it's not directly imported to Scandinavia, Germany is your best shot at trying to get a hold of nifty US export items. But that doesn't apply on the PT-540, which is sad really. Seems like a great tool and I'd love to add it to my tool belt.
Guess I'm gonna have to order it in from the US directly, adding intercontinental shipping costs on top of a considerable amount of money for the PT-540 itself. Ah well, guess in the end it's probably worth it :)
-
Welcome to the forum mate

And yes there very difficult to find in Europe I'm affraid :-\
-
Having owned a Sog I can tell you, you won't be disapointed.
-
To be honest this tool is built even better than most other SOG's I've handled. Don't know why that would be, but it is. :)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login