Wingman scissors
-
I'm thinking if it was someone's first MT they would like the scissors.
But if they had ever used Vic scissors, they would indeed be disappointed... -
I carry a Classic in my pocket in order to have the precise scissors and the tweezer, and haven't found any good scissors on a multitool except for the Swisstool, Spirit and Vic SAKs - which are also very precise.
It depends on what one is looking for in scissors. If you are cutting zip ties or canvas, just about any of the multitool scissors will work for you. But for finer stuff, like hangnails and so forth, few if any MT scissors will do the trick. Ever try removing a hang nail (or similar) with a Juice, Wave, or Wingman? No way.
Precise scissors as found on the Classic or Spirit will do the trick, and in my view are vastly superior to the rest of the pack.
So whether one digs the Wingman's scissors depends in large degree on what you will be doing with them.
On my particular Wingman - though I assume not all Wingmans - the lock disengages when I use the scissors, so the scissors don't function at all.
This whole scissor issue is one reason I like scissorless MTs like the ST300 and upcoming Rebar. Since I don't much like MT scissors generally, I'd just as soon save the space for something else. I know most folks have a countervailing opinion, and thats groovy. This is just my opinion.
-
I tried cutting a cotton gauze pad,to cover a diabetic foot ulcer. And it fought me as Dunc originally described

-
I tried to cut a zip tie today with my wingman scissors. I ended up pulling out my knife blade. After carrying my wingman this week at work and using it for every task that came up, I must say that it feels very much like a beginner tool, and not in a good way. The plier handles are too far apart when closed for a tool this size, the end of the longer handles is kicked out(so as to wrap around the smaller end for that "skeletool" look when closed) and this hurts the palm a bit if you apply significant pressure, the scissors are all wrong for any but the lightest duty, and still not as good as the smallest Vic scissors. The drivers and inside tools don't lock, which is disappointing for a tool that weighs in close to my blast. The file, while sharp, is utterly useless for any medium or higher needs. The phillips works pretty good actually, but since it's non locking I have no confidence in doing anything other than minor tighting or loosening with it. The can opener is par or worse than most LM models to date. The knife blade is thin to the point of feeling very weak, but it does have a great edge after a bit of stone work. It just feels very wobbly and the detent doesn't hold it in very well when closed(I have this issue with all the OHO LM tools, it's probably just me, YMMV).
All that said, the clamshell opener is cool! I hope they add it to more models.
The one thing I really, really like though is the Spirit style springs on the plier pivots. That positive lock just screams quality, even if it's masking other issues.
-
Any one else have a problem with the scissors being very thin and easily flex so that the lock mechanism slips out of place?
-
No I havnt , mine have always locked firmly in place .
-
I gave my brother in law a Wingman for Christmas. He now carries it instead of his old PST because he likes the pocket clip. While we were working on a project, he used the Wingman scissors a few time and found that the spring did not close the scissors at all. I took a look at it, but couldn't figure out how to fix them. He continued to use them and we both heard a click from the MT. He tried the scissors and found that the spring now worked correctly. I'm not sure what was wrong, but all seems to be good now.
-
The spring on the scissors won't work unless the liner lock is fully engaged. Sticky liner lock seems to be a common issue on the Wingman.
-
As you deploy the scissors open the jaws at the same time . The line lock wont engage if the jaws are closed .
-
I didn't describe the problem well. How about a pic? First time I use the scissors to trim my nails. The scissors flex along the length to the right at the tip which causes the spring to slip.

Anyone else seeing it?
Martin
-
@Dunc said:
As you deploy the scissors open the jaws at the same time . The line lock wont engage if the jaws are closed .Tried it and you are correct sir (as usual ;)), if you keep the tension off of the scissor spring, it locks every time

@82brutus said:
First time I use the scissors to trim my nails. The scissors flex along the length to the right at the tip which causes the spring to slip. Anyone else seeing it?Martin
Yes, I can make it do that, but the spring seems to snap right back in place when I push it there.
-
I haven't ever really needed scissors to do much beyond trimming my 'stache..... Sometimes for zip-ties and fingernails.
I haven't had any problems with the scissors on my Wingman.... so far.
When it comes to cutting paracord, I usually only use the knife blade anyways..... paracord is tough stuff. I've had scissors bend and give out on me while cutting 550 cord, so I only use a knife now.
I prefer the scissors on my Wave over the ones on my WM. -
They sort of remind me of Juice scissors. Big and sharp, but not powerful like the ones on the Surge/Wave/Charge.
-
@82brutus said:
I didn't describe the problem well. How about a pic? First time I use the scissors to trim my nails. The scissors flex along the length to the right at the tip which causes the spring to slip.Anyone else seeing it?
Martin
Had that happen to me on other MT as well, you can grind the tip of spring to a slope that cants toward the other half, so it'll stay in place.
-
Thanks, I will try that! It isn't a huge problem for me as I'll probably stick with the SAK scissors to trim my nails.
Overall, there are some very favorable things about the Wingman (cost, OH blade similar shape to skeletool, cost, pliers, cost). I'll keep it around for the occasional use. If it had been one of the first Leathermans/multitools that I had bought, I wouldn't think twice about it being a good value. I like the blade (mine shaved hair, right out of the package), love the package cutter tool and won't feel too bad about letting someone borrow it.
Maybe the Wingman is a good platform for some experimentation with new tools and as they find tools that people really like, they can bump them up to the more expensive platform?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login