34th Annual SHOT Show
-
I was looking more for any other booths or products I should look for.
Def
-
Ganzo? :D
Sanrenmu? :DBuck, Rough Rider, GEC, Cold Steel may have some interesting news...
-
Cold Steel doesn't go to SHOT anymore following a disagreement with event coordinators about booth size.
Def
-
Since most people around here have an interest in knives too, if you can see what new is coming from knife makers it will be nice.
Also any new flashlights will be interesting, if the manufacturers go to SHOT.
Mainly, have a good time. I am sure it is the kind of event in which you loose track of time.
:D -
It is indeed. We also usually harass as many knife and light makers as we can. In fact, we often get distracted going from one booth to the next and often end up late for meetings or missing them entirely because we find other cool stuff on the way!
Def
-
I can see the point the Bear makes about thinking no one is interested in them, because from what I have seen of the general tool using public, they are right. I know WE all like their tools(I am still drooling over the mini bear jaws and I WILL end up with one) but I have never met anyone outside of MTO that has even heard of them. When I tell them about Bear they maintain that I shouldn't waste my money and should just buy a Leatherman. Who knew the public would fall for brand association? :D
As for Vic, I love their stuff, I can't really think of too many improvements that would shove their tools past the level of awesomeness they have achieved other than maybe a less polished version of everything for grip. Darn spirits are slippery!
I want to see SOG come out with some better implements for their tools, not really any new actual tools. The lineup of swap-able components is small and some of them need updating. This seems to me to be a much more cost effective way for SOG to update their line without breaking the bank. I would definitely like to see more blade options and a new scissor for the powerlock. Maybe a Leatherman style bit driver or something as well. And a Blade exchanger!
I'd like to see a new gerber that fits traditional lines like their MP series, no more of this odd shaped odd-ness that is supposed to make MT's more mainstream. I'm not really a fan of the crucial/octane shape. They seem to weigh a bit too much for what you get too.
-
Keep your eyes open for the Gerber Balance. Maybe you could take the opportunity while you have them cornered to ask them why the delay... Or when it will be out?
-
I will certainly be grilling Gerber about the Balance and documenting anything new they may have.
Def
-
Make sue you grab lots of stickers and the promotional items from every table for MT.O giveaways :D
-
Something else, I'm thinking they should have the new Charges and Waves with the replaceable cutters there. Can you get some pictures of them next to the old style for comparison? Thanks :)
-
We will certainly have pictures of whatever they have!
Def
-
Maybe you could ask around about a Multitool with diagonal wire cutter heads.
A lot of times I don't need pliers and when I do the pliers are not the best tool for the job. If a tool had a decent set of FORGED and heat treated anvil type cutters it would never wear out from my usage. The problem that causes the damaged cutters on all the "standard" wire cutters is the cast (soft) plier head. If someone made a set of diagonal cutters instead of pliers we would have a great tool.
I keep hoping to find a good set of diagonal wire cutters cheap at a swap meet or yard sale that would serve as the basis for the new tool...but making your own is not all that easy even if you had an entire machine shop available...just ask Bob. Maybe this would be a possible tool for Paladin? Paladin in partnership with SOG makes some great datacom tools....a PT-510 sized with compound leverage diagonal wire cutters instead of pliers would be great. And I'm sure they would sell a lot of the plier heads that we could put on our PPP's and then maybe SOG would sell some PPP's.
Bruce
-
We've been down that road before and it usually doesn't go anywhere.
The folks at MTO are working on a way to solve that issue, so if SOG won't then maybe we'll have something to offer you soon. >:D
Def
-
@Bruce909 said:
Maybe you could ask around about a Multitool with diagonal wire cutter heads.A lot of times I don't need pliers and when I do the pliers are not the best tool for the job. If a tool had a decent set of FORGED and heat treated anvil type cutters it would never wear out from my usage. The problem that causes the damaged cutters on all the "standard" wire cutters is the cast (soft) plier head. If someone made a set of diagonal cutters instead of pliers we would have a great tool.
I keep hoping to find a good set of diagonal wire cutters cheap at a swap meet or yard sale that would serve as the basis for the new tool...but making your own is not all that easy even if you had an entire machine shop available...just ask Bob. Maybe this would be a possible tool for Paladin? Paladin in partnership with SOG makes some great datacom tools....a PT-510 sized with compound leverage diagonal wire cutters instead of pliers would be great. And I'm sure they would sell a lot of the plier heads that we could put on our PPP's and then maybe SOG would sell some PPP's.
Bruce
Fantastic idea. I think SOG really underestimated the interchangeable factor when the limited their selection to what it is. They need to develop more components for us to buy, and your wirecutter head idea is a great way to start. I can think of plenty of guys who would kill for a wirecutter multitool. They'd even carry it with their EDC multi at work.
-
Ask leatherman folks if they are coming up with new Vise Grip models ala Crunch.
Or even wrench based tool. That would be nice. -
Diagonal cutter head tool

-
And did I mention a diagonal cutter tool would be a great idea

-
I have collected multi tools for 14 years
not once has sog come out with a new tool that was really something different except the para tool which has been out for many years
I have no faith that sog will develop something new -
@scrappy said:
I have collected multi tools for 14 years
not once has sog come out with a new tool that was really something different except the para tool which has been out for many years
I have no faith that sog will develop something newIt's a bummer because I really like the concept of the powerlock, but there aren't enough different tools to swap out. You are really limited to what they make unless you make something from a different tool fit. I just got a powerlock that doesn't have gear covers and it only took me about a minute and a half to realize why that sucks. I was trying to be optimistic with it and carry it for a while, but with my hands there is no way to comfortable hold the darn thing. It's going on Ebay and I may buy a newer powerlock. I may not though, the tool has some fundamental things about it that I have never liked and it seems that after putting piano locks on their tools a while back SOG has stopped the innovation. I'm kinda losing interest at this point.
-
I have collected multi tools for 14 years
not once has sog come out with a new tool that was really something different except the para tool which has been out for many years
I have no faith that sog will develop something newIt's a bummer because I really like the concept of the powerlock, but there aren't enough different tools to swap out. You are really limited to what they make unless you make something from a different tool fit. I just got a powerlock that doesn't have gear covers and it only took me about a minute and a half to realize why that sucks. I was trying to be optimistic with it and carry it for a while, but with my hands there is no way to comfortable hold the darn thing. It's going on Ebay and I may buy a newer powerlock. I may not though, the tool has some fundamental things about it that I have never liked and it seems that after putting piano locks on their tools a while back SOG has stopped the innovation. I'm kinda losing interest at this point.
The newer powerlock is better than the non gear covered one for sure. I hated the older style. I dont know if its going to be better enough though for you to love it. I really love the compound cutters though, so it was a must have for my rotation. I've taken mine apart and added a robertson driver to it too.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login