Leatherman REBAR Multi-Tool
-
@Grant Lamontagne said:
(http://forum.multitool.org/index.php?action=profile;u=15)Here you go! :D
Def
Thank you

-
I have only popped into this thread intermittently, but looking at the photos, it appears that the Rebar and ST300 are related in the same way that the PST and original ST and Wave and Surge are related.
Is that a fair assessment?
-
Yup- it looks to be basically a smaller ST300.
Def
-
I just noticed something from the facebook pictures.
It looks like the file and saw are stamped from the same die. Their shape is pretty much identical, and so is the fingernail hole.
aren't files supposed to be harder, and saws more springy and flexible?
I hope they heat treat them differently. -
Bear in mind the pictures you are seeing are pre-production samples. They should be close, but not necessarily exactly how the production version will look. In any case, I fully expect Leatherman will make sure that they are both hardened to their intended purpose- after all, they have experience making saws and files, and if they didn't, they are the ones who would suffer by replacing all the broken ones under warranty.
Def
-
Hard to replace the blast without scissors.
Stay multi my friends
-
@Beerplumber said:
Hard to replace the blast without scissors.Stay multi my friends
While I love the scissors on my blast, I am perfectly willing to give them up for an awl and serrated blade. I always carry a SAK to back it up anywhay, so my scissor needs are covered.
-
Hard to replace the blast without scissors.
Stay multi my friends
While I love the scissors on my blast, I am perfectly willing to give them up for an awl and serrated blade. I always carry a SAK to back it up anywhay, so my scissor needs are covered.
I'd happily drop the serrated blade to get myself some scissors, but it's not exactly a deal breaker.
-
Hard to replace the blast without scissors.
Stay multi my friends
While I love the scissors on my blast, I am perfectly willing to give them up for an awl and serrated blade. I always carry a SAK to back it up anywhay, so my scissor needs are covered.
I'd happily drop the serrated blade to get myself some scissors, but it's not exactly a deal breaker.
It's a give and take really. I am just thrilled to have a new traditional style LM coming out that DOESN'T have OHO blades. They don't fit my preference and I have been carrying the blast so long I am just a bit bored with it. I still love it but new toys are fun!
-
Will there be any MTO folks attending this year's SHOT Show? Am curious as to how the debut of the Rebar will be.
Was not a fan of the Wingman as much as I thought would be. Liked its opening jaws, yet if felt flimsy after carrying a Charge, Crunch, Surge, & Wave so many years. Hope the Rebar will not be made from the sane flimsy structure as the Wingman was.
-
@Xelkos said:
Will there be any MTO folks attending this year's SHOT Show? Am curious as to how the debut of the Rebar will be.Was not a fan of the Wingman as much as I thought would be. Liked its opening jaws, yet if felt flimsy after carrying a Charge, Crunch, Surge, & Wave so many years. Hope the Rebar will not be made from the sane flimsy structure as the Wingman was.
Oh, I suspect so.. ;)
-
Yup, we will be there. In fact, I will be heading off to the airport in a few hours.
Def
-
@Grant Lamontagne said:
Yup, we will be there. In fact, I will be heading off to the airport in a few hours.Def
Very exciting! Is it sad that SHOT coverage is all I have to look forward to for the next week? Work sucks, baby doesn't let me sleep, and I'm broke. So bring on pix of tools for me to drool over!
-
No problem there! We'll be updating Twitter, Facebook and LinkedIn almost constantly, which should, if all goes well, also update the Events Forum, so hopefully we will keep you pretty amused.
We are also considering a Google+ Hangout at some point, so if you are on Google + add me, just in case. Grant.lamontagne@gmail.com
Def
-
I wish they would make a few versions....one with scissors instead of the SE blade, or a knifeless version.
-
@gafftapegreenia said:
I wish they would make a few versions....one with scissors instead of the SE blade, or a knifeless version.Unfortunately LM isn't known for making different tool loadouts. They change handle scales and plier heads and finishes on all models, but the dang tool loadout is always the same. I wish they would take a cue from the other big 4 companies and at least offer a few different layouts, but I won't hold my breath. I have been wishing they would go the way of SOG for a long time, and make their tools interchangeable by the user without voiding the warranty. Heck, SOG even lets you change out your Plier heads!
I took apart my sideclip once to clean it and buggered a fastener so I sent it to them with a repair request and a request for a bill so I could pay them but they didn't charge me. Great service and good on them for doing it but I doubt it's something they would advertise doing that they would get flooded with mods gone bad. I personally won't send LM a tool I KNOW was damaged through neglect or modification, but not everyone is like that.
-
I wish they would make a few versions....one with scissors instead of the SE blade, or a knifeless version.
Unfortunately LM isn't known for making different tool loadouts. They change handle scales and plier heads and finishes on all models, but the dang tool loadout is always the same. I wish they would take a cue from the other big 4 companies and at least offer a few different layouts, but I won't hold my breath. I have been wishing they would go the way of SOG for a long time, and make their tools interchangeable by the user without voiding the warranty. Heck, SOG even lets you change out your Plier heads!
I took apart my sideclip once to clean it and buggered a fastener so I sent it to them with a repair request and a request for a bill so I could pay them but they didn't charge me. Great service and good on them for doing it but I doubt it's something they would advertise doing that they would get flooded with mods gone bad. I personally won't send LM a tool I KNOW was damaged through neglect or modification, but not everyone is like that.
Lets be a little fair to LM; they did two versions of the Fuse (standard and knifeless), and essentially two versions of the Charge (scissors or second bit driver), two versions of the PST, multiple versions of the Squirt etc.
That said they do nothing like the numerous versions of the MP600 that Gerber have produced over the years, now that would be nice to see.

-
I wish they would make a few versions....one with scissors instead of the SE blade, or a knifeless version.
Unfortunately LM isn't known for making different tool loadouts. They change handle scales and plier heads and finishes on all models, but the dang tool loadout is always the same. I wish they would take a cue from the other big 4 companies and at least offer a few different layouts, but I won't hold my breath. I have been wishing they would go the way of SOG for a long time, and make their tools interchangeable by the user without voiding the warranty. Heck, SOG even lets you change out your Plier heads!
I took apart my sideclip once to clean it and buggered a fastener so I sent it to them with a repair request and a request for a bill so I could pay them but they didn't charge me. Great service and good on them for doing it but I doubt it's something they would advertise doing that they would get flooded with mods gone bad. I personally won't send LM a tool I KNOW was damaged through neglect or modification, but not everyone is like that.
Lets be a little fair to LM; they did two versions of the Fuse (standard and knifeless), and essentially two versions of the Charge (scissors or second bit driver), two versions of the PST, multiple versions of the Squirt etc.
That said they do nothing like the numerous versions of the MP600 that Gerber have produced over the years, now that would be nice to see.

True, I did omit the Fuse, Charge, and PST.
My claim seems a bit flimsy after that admission. :DBut they truthfully don't do much else. You can't get a Blast that has an awl, or a serrated blade, until the REBAR comes out that is. So folks that like the traditional style tool in a mid size weight have been stuck without an awl or serrated bladefor years. Doesn't seem like a deal breaker but that exact issue coupled with a few of LM's QC hiccups is what caused me to branch out to other companies. While that is great for me personally, Leatherman lost money because I bought other brands for a while. All that aside, I am about positive the REBAR will be my new EDC and will remain so for years, so I still a big Leatherman fan, I was just pointing out my viewpoint. Until the glorious day when the REBAR arrives at my door, my restless MT soul will be focusing on Gerbers and such!
-
I'm not knocking your viewpoint at all Sean, in fact I agree with it, I always thought the Fuse was ripe to have many more variations done. I'd love to see LM make 3 or 4 simple variations on the REBAR, but I'm not going to hold my breath. :-\
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
