What's your latest flashlight?
-
Just ordered a mododular tail cap from oveready. It's going on my custom 3p :D
-
Also my triple triple is out :(. Can't afford it so I'm going to build a 1d myself with the help of my friend in the maintenance dept.
-
@Heinz Doofenshmirtz said:
Just be careful with those 18650's! Pay attention to their charge and discharge states or they will breathe fire on you; literally. Even though they say they're protected, be careful anyway. Those XXX-fire cells use cheap protection circuits that are known to not always work properly. As soon as you can afford it, upgrade to something like an AW, RediLast, or a Kallie's Kustom. They'll give you more power, be safer, and give you more usable cycles out of the cell.
As for myself, apart from my SC80c desires right now, I'm jonesing for a Nailbender neutral XML P60 drop in now for my L2X extended... something like 650 lumens OTF on max! Woo hoo!

I doubt these cells are protected or give more than 2000mAh, though they claim 3800.... :D
I was going to buy some better batteries, but decided to give these two a chance first, as they were included with the light.
I am aware of the stories on CPF, your favourite forum :D, etc. regarding the 18650s, though from a statistical point of view given the actual number of really bad batteries in use the number of problems seems minimal.
As I wrote, I checked the voltage before, after and in one case during charging just to be on the safe side, though I do not expect them to explode if the voltage goes a bit over 4.24V, as some of the users have convinced themselves will happen ;) .
Agreed... I think the horror stories about li-ion cells are overstated and overblown. I've only ever bought AW's so far though, so my experience is biased.
I don't want to even get started about CPF... I still read and post there from time to time, but ugh! MTO is my online home now!

-
Heinz, I have now ordered a Panasonic 18650, protected, just to get the best performance out of my torch. I posted some current readings too, in my LIDL light thread.

-
I've had all kinds of batteries. 16340, 18500, 18340, protected and not protect. I charge them and then try to make them blow. Overcharge and over drain. I've haven't had but 1 leak and it was aa size nimh.
-
@dks said:
Heinz, I have now ordered a Panasonic 18650, protected, just to get the best performance out of my torch. I posted some current readings too, in my LIDL light thread.
Thanks for the info; I'll check it out. I've been wanting to try some other brands of cells. I know that most of the high end 18650 makers like RediLast and AW use the Panasonic core but have their own PCB's and protection circuits in them. I'm going to need at least two more soon, as I'm planning on getting a Solarforce L2P and a neutral or warm XML module as well. I'd love to get one of the Nailbender ones, but I've heard that ThruNite makes some nice 3 mode warm XML modules, as does Dereelight.
Either way, my next lighting puchase is going to be a Solarforce LT1 lantern head attachment. My wife and I are going to do a short camping trip with our kids over spring break in two weeks, so I want to have the LT1 for that trip.
-
I picked up an ITP SA2 Eluma recently for work. I love it, but the lowest setting(said to be 6 lumens) is a retarted setting for a 2AA flashlight. Waste of a setting if you ask me.
What i do like about it is everything else. It has a medium and high of 42(or so) lumens and 230 lumens respectively, with a side mounted selector switch, memory(so you can leave it on one setting), and an infinite beam adjuster built in to the switch.
It also comes with a ridiculously flimsy belt sheath that was soon replaced by my Bianchi Accumolt holster(with modification for lenghth) and a complete tail switch innards replacement.
-
@Mercury said:
I picked up an ITP SA2 Eluma recently for work. I love it, but the lowest setting(said to be 6 lumens) is a retarted setting for a 2AA flashlight. Waste of a setting if you ask me.What i do like about it is everything else. It has a medium and high of 42(or so) lumens and 230 lumens respectively, with a side mounted selector switch, memory(so you can leave it on one setting), and an infinite beam adjuster built in to the switch.
It also comes with a ridiculously flimsy belt sheath that was soon replaced by my Bianchi Accumolt holster(with modification for lenghth) and a complete tail switch innards replacement.
I love my SA2 as well. It's just a shame they're not being made any more (or so I understand) as the iTP brand is gone and there's no Olight equivalent on the cards. :-\
-
i use a led lenser P7 at home and a T5 at work.

-
I picked up an ITP SA2 Eluma recently for work. I love it, but the lowest setting(said to be 6 lumens) is a retarted setting for a 2AA flashlight. Waste of a setting if you ask me.
What i do like about it is everything else. It has a medium and high of 42(or so) lumens and 230 lumens respectively, with a side mounted selector switch, memory(so you can leave it on one setting), and an infinite beam adjuster built in to the switch.
It also comes with a ridiculously flimsy belt sheath that was soon replaced by my Bianchi Accumolt holster(with modification for lenghth) and a complete tail switch innards replacement.
I love my SA2 as well. It's just a shame they're not being made any more (or so I understand) as the iTP brand is gone and there's no Olight equivalent on the cards. :-\
I didn't realize ITP was gone! I love their stuff. Depending on how long this SA2 lasts I may have to pick up another before they get rare.
-
Isn't itp just a side brand set up by another flashlight company? Nitecore or somebody else.
-
I read ??? ITP was part owned/bought by olight who was making all its torches and branding them as itp anyway.
They then decided to get rid of the *itp * brand as a whole and just put the olight brand on the torches they were making and selling as itp..
Doesn't anybody else lurk in CPF and Budjetlights ?? :D
-
I make a point to avoid CPF for the most part...
-
I make a point to avoid CPF for the most part...
why?? ???
:D
I did post a thread from CPF in the "Hijacking death" thread a few days back that makes interesting reading..
Me too (avoid the place that is).
I find CPF inconsistent and no longer the friendly place it once was.
Here, if you ask a question that has already been asked, or post in the incorrect section, its ok. Over at CPF, sometimes its ok, sometimes other members jump on you, and sometimes the mods jump on you.
-
I make a point to avoid CPF for the most part...
why?? ???
:D
I did post a thread from CPF in the "Hijacking death" thread a few days back that makes interesting reading..
Me too (avoid the place that is).
I find CPF inconsistent and no longer the friendly place it once was.
Here, if you ask a question that has already been asked, or post in the incorrect section, its ok. Over at CPF, sometimes its ok, sometimes other members jump on you, and sometimes the mods jump on you.
Exactly. CPF is just not my type of place, they used to be though. Same with EDCF. I used to love that place but now I don't.
-
Purchased the Sunwayman L10A last week. I am really enjoying the form factor. Great heatsinking and a constant current driver should produce good runtimes.

I joined CPF in 2001 and left very shortly after the original owner's on-line melt down. Early CPF was a fun and unique place.
-
The single biggest problem with CPF is they don't tolerate any negative comments about their advertisers.
I got banned for two weeks for posting that four of the five 4Sevens neutral white lights I've bought from them in the past two years were all green, and that I didn't think they were putting any effort into QC on the tints of their emitters.
I still occasionally read through a few threads there, and make a short post once in a while, but I've pretty much given up on the place. They're smurf smurfing smurf mongers and they can go smurf themselves for all I care.
I make a point to avoid CPF for the most part...
why?? ???
:D
I did post a thread from CPF in the "Hijacking death" thread a few days back that makes interesting reading..
Me too (avoid the place that is).
I find CPF inconsistent and no longer the friendly place it once was.
Here, if you ask a question that has already been asked, or post in the incorrect section, its ok. Over at CPF, sometimes its ok, sometimes other members jump on you, and sometimes the mods jump on you.
Exactly. CPF is just not my type of place, they used to be though. Same with EDCF. I used to love that place but now I don't.
-
I have seen the effects of their comment censoring, though I wasn't the one being censored. I have maybe posted twice over there, but I have lurked and read through their archives quite a bit in the past and was always put off by both the advertisement pandering and the general attitude.
I know we didn't start a thread on EDCF, but man they have gotten weird lately. Very stiff feeling.
It all makes me grateful that MTO is here and is the way it is. It's a rare thing.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
