The SwissTool owners club
-
Very nice

-
@turnsouth said:
Starter Set:
What all models do you have there Paul? :)
-
Thanks

One of each, RS, X , BO, and Standard. The extra two are Standards, just to have as backups because of the 6-8 week warranty turn-around time :-. All but the RS are cheap eBay snipes, the RS I got in a trade with Al. The BO one is a used beater (you're seeing it's best side in the photo), but I like the Vic oxide coating so much that I just ordered a new one for "good". You know, just something to go with Sunday clothes :D
-
Thanks to Captain Spaulding, I'm in.


I didn't realize how big this thing is! :o But I love it already. It's just built like a tank! A quick question though- I don't have a sheath for it. Will the Vic Spirit sheaths I see on Amazon fit it, or am I SOL? For the moment I have to see it it will fit in a Leatherman sheath.
EDIT: Never mind, found a Swisstool sheath on Amazon, have it OTW. Wasn't looking hard enough I guess......
-
Glad you like it. :D
I would say your Swiss Tool has no chance of fitting in the Vic Spirit sheath. I would suggest buying a Swiss Tool sheath made for your tool. They can be had for a decent price and will fit your Swiss Tool like a glove.
P.S. I had no idea it is your first Swiss Tool. Welcome to the Club.

-
Oops Wrong forum
-
Can I join (old pic)?

Regards, Jon.
-
I s'pose we'll allow you in. ;)
Stabbing nice picture there Jon!

-
@jerseydevil said:
Thanks to Captain Spaulding, I'm in.

I didn't realize how big this thing is! :o But I love it already. It's just built like a tank! A quick question though- I don't have a sheath for it. Will the Vic Spirit sheaths I see on Amazon fit it, or am I SOL? For the moment I have to see it it will fit in a Leatherman sheath.
EDIT: Never mind, found a Swisstool sheath on Amazon, have it OTW. Wasn't looking hard enough I guess......
Well I had to read every post and catch up, so here's some pics of my Spirit.
I use it daily and have a related thread on EDCForums, showing some pics... here> http://edcforums.com/showthread.php/92796-A-day-in-the-life-of-my-VIC
Jerseydevil, I purchased a black nylon pouch (VIC) but as it started to wear out, I got a SkinthXL from Metropolicity. He's a member here, and there, too.
I have a "load-out" thread showcasing some Skinth love. on EDCForum > http://edcforums.com/showthread.php/91769-Skinth-Loadout-Gallery
And a newly started one on MTO. > /topic/36107
Hope the info helps! On to the pics!!
Removing a screw from a water heater element

Pulling an old rusted out piece of galvanized vent piping from the chimney wall

Using the Vic's ratchet to put together my wife's shelf. You can see the fully loaded SkinthXL in the background.

Using it as a mirror to see how far I have the 3/8" supply nut screwed on the dishwasher supply.

Here's a good one. Everyone always talks about being able to use 2 tools at once. Precisely what I had to do with this Kohler Ceramic Disc Cartridge and it's handle extension

Perfect tool for this job! Tightening a plastic wing nut on a Gerber toilet tank to bowl bolt

I hope I haven;t imposed on your thread with al the talk about my Vic Spirit. I gave my 1st SwissTool to my brother-in-law in Belize and my 2nd one to my wife. So I don't have any pics of anything but the Spirit.
If you can't tel...I'm a fan:) -
I'd never thought of using the mirror finish as a 'feature' before. Great idea.
Excellent pictures as well. -
By the looks of it, you might need to change your name to SPIRITplumber!
:D -
Thanks to Captain Spaulding, I'm in.


I didn't realize how big this thing is! :o But I love it already. It's just built like a tank! A quick question though- I don't have a sheath for it. Will the Vic Spirit sheaths I see on Amazon fit it, or am I SOL? For the moment I have to see it it will fit in a Leatherman sheath.
EDIT: Never mind, found a Swisstool sheath on Amazon, have it OTW. Wasn't looking hard enough I guess......
Well I had to read every post and catch up, so here's some pics of my Spirit.
I use it daily and have a related thread on EDCForums, showing some pics... here> http://edcforums.com/showthread.php/92796-A-day-in-the-life-of-my-VIC
Jerseydevil, I purchased a black nylon pouch (VIC) but as it started to wear out, I got a SkinthXL from Metropolicity. He's a member here, and there, too.
I have a "load-out" thread showcasing some Skinth love. on EDCForum > http://edcforums.com/showthread.php/91769-Skinth-Loadout-Gallery
And a newly started one on MTO. > /topic/36107
Hope the info helps! On to the pics!!
Removing a screw from a water heater element

Pulling an old rusted out piece of galvanized vent piping from the chimney wall

Using the Vic's ratchet to put together my wife's shelf. You can see the fully loaded SkinthXL in the background.

Using it as a mirror to see how far I have the 3/8" supply nut screwed on the dishwasher supply.

Here's a good one. Everyone always talks about being able to use 2 tools at once. Precisely what I had to do with this Kohler Ceramic Disc Cartridge and it's handle extension

Perfect tool for this job! Tightening a plastic wing nut on a Gerber toilet tank to bowl bolt

I hope I haven;t imposed on your thread with al the talk about my Vic Spirit. I gave my 1st SwissTool to my brother-in-law in Belize and my 2nd one to my wife. So I don't have any pics of anything but the Spirit.
If you can't tel...I'm a fan:)Hey SAKplumber glad to see you here - gstojinovic -
-
Thanks Gareth!
Jsews-, thats not a bad idea. I started my love of all things VIC with a SAK.
-
Just thought I'd stop by and show off my Vic a little more:)
I had to get that little "childproof" tab off of my government mandated "safety" can. I've been wearing my fingertips raw trying to get these things open for a year. No more.

Had to pull some little trees out from under my deck today when I got home. I love that ergonomic grip. Check out the roots on this little sapling. The grip I had on the Spirit was nice for this. On a couple of these things I had to use both hands, but the handle of the Sprit never became uncomfortable.

-
Couple of good Spirit applications there SAKp
Damn I do hate those safety nozzles
I bet a guy could make a fortune selling the plain old yellow snout ones on the black market. :PHey......

-
I'm in da club! :ahhh I'm in da club! :ahhh
not only that i'm the more exclusive Aussie-army-nato-numbered-issued-black-oxide **BREATHS ** Swisstool section of the club
Here is a photo of my 05 head getting aquainted with its new home. My suzuki tool rool.

-
I got one of the original ones after owning (and not being satisfied with) my original Leatherman. I didn't like that I had to open the thing to get to a tool, and the tool "locking" was rather crude.
My grandpa had a Gerber, one if the original ones, and it was better in done respects, and worse in others.
So when the SwissTool burst on the scene with its superior fit and finish, all locking tools, all but the pliers accessible from the outside, I had to have one, despite the then $75 price tag.
I was not disappointed. I never carry it, due to the weight and bulk, but I would if I had a more hands-on-type job.
For now, I treat it as a super-compact toolbox that I keep in my desk drawer at work. Or in a bag.
For me, a traditional SAK is just better for my day-to-day uses.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

