Skip to content
Collapse
? [[global:guest]]
Unread Recent
HOME SEARCH PROFILE NOTIFICATIONS 0 MESSAGES 0 BOOKMARKS MEMBERS BADGES
Multitool.Org Forum
MultiTool.org • Community Header Space • Watch This Space

84mm Alox Cybertool w/ 91mm scissors (WIP) (Pic heavy)

Scheduled Pinned Locked Moved The Mod Squad
35 Posts 1 Posters 22.0k Views
  1. Home
  2. Tool Talk
  3. The Mod Squad
  4. 84mm Alox Cybertool w/ 91mm scissors (WIP) (Pic heavy)
84mm Alox Cybertool w/ 91mm scissors (WIP) (Pic heavy)
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • Glynn Offline
    Glynn
    Posts: 29
    Glynn Offline
    Glynn
    wrote on last edited by Glynn
    #10 Quote Reply

      Time for an update!

      I wasn't at all happy with how the scissors turned out, opening and closing it wasn't working very well, and lack of snap was terrible. So I scrapped it and started over. It turns out some of the assumptions I made were due to a lack of precision. Drilling the hole closer to the previous hole, with only about 1mm between them, gave me enough space to make this work much better, allowing me to:

      1. Properly round the back end off, since there's no hole in the way, so opening and closing work a lot smoother.

      1. Leave the backspring with no notches, much easier to do, since you only have to file a little curve for the scissors handle. This allows more force on the back edge of the tool, meaning the scissors snap is excellent now!

      I still had to file a bit off the spine of the scissors to allow it to open fully, but there's still enough metal there I'm not worried about breaking it. Also, the tip of the scissors sits very close to the end of the knife, but again, JUST enough room to work.

      A few other thoughts:
      I combined the wood into a single piece that fills the inside of the layer, it might add a tiny bit of weight, but not a big deal, works much better that way, no worries about finding glue that will work. Unfortunately, I see no way to add tweezers/toothpick/pen or anything else to this layer, there's really not enough room to work with here, but that's what other layers are for, I'll fit at least some of them in, somehow.

      Since the scissors is slightly thicker than the backspring, I'm making another spacer for this layer, same shape as the backspring, out of .016" brass. I'm going to use a washer on each side of the scissors, just waiting for the mailman to bring my .005" brass foil/sheet. I know there's a washer shown in the pic, but it's way too thick and was just for testing purposes.

      To make this as simple a conversion as possible, you COULD do this without spacers/washers, but the scissors is slightly thicker than the backspring, and I don't know how well it would work once it was assembled/peened. The rivet/screw on the scissors scrapes against the liner, for one thing. I suppose you could cut the liner down a bit, and it might work, but I'll leave that for someone else, I'm not going to try it on this one, at least. Also, it might be possible to round the backspring by the scissors handle enough that you it would close without needing the wood filler, but again, I'll leave that for someone else to try. ;)

      The parts for this layer all still need finishing, cutting/filing/sanding down to the right dimensions, but that's all waiting on getting the washers and seeing if I need to adjust anything else.

      1 Reply Last reply
      • Syph007 Offline
        Syph007
        Global Moderators
        Posts: 9,842
        Syph007 Offline
        Syph007
        Global Moderators
        wrote on last edited by
        #11 Quote Reply

          Hey nice to see you post an update on this. Your original post was the inspiration for my current mod of getting 91mm scissors on an 84 mm cadet.

          What I found was like you hole drilling in the scissors was key. I have about 10 of the older style 91mm scissor springs (non hook type) and they can actually be cut to fit the 84 mm frame perfectly. I was blown away when I figured that out. I'm not quite done, just proved to myself it works, but I will update with pix to show what I did. Of course since the 91mm spring has larger holes I had to drill out all the components to use larger pivots, but it was the best compromise I could come up with. Im working on making up a bunch of HA alox cadets with scissors.

          Anyways, I LOVE to see how others tackle similar problems, so thanks for posting!

          1 Reply Last reply
          • Glynn Offline
            Glynn
            Posts: 29
            Glynn Offline
            Glynn
            wrote on last edited by
            #12 Quote Reply

              @Syph007 said:
              What I found was like you hole drilling in the scissors was key. I have about 10 of the older style 91mm scissor springs (non hook type) and they can actually be cut to fit the 84 mm frame perfectly. I was blown away when I figured that out. I'm not quite done, just proved to myself it works, but I will update with pix to show what I did.

              Now I'm going to have to dig through my parts boxes and see if I can find any of those older 91mm scissors springs you're talking about. :ahhh
              Making this work on the smaller springs I'm currently using is a lot of busywork/trouble/(fun!), but having a spring that would eliminate most of that would be awesome, though I guess the added problem of having to drill all the tools out for the larger holes/pins might offset that. Be nice to find some thin brass/copper/something tubes to resize the holes, maybe just some rolled up brass sheet of the right thickness would work..
              Anyway, pics please! :pok:

              1 Reply Last reply
              • Syph007 Offline
                Syph007
                Global Moderators
                Posts: 9,842
                Syph007 Offline
                Syph007
                Global Moderators
                wrote on last edited by
                #13 Quote Reply

                  @Glynn said:

                  @Syph007 said:

                  What I found was like you hole drilling in the scissors was key. I have about 10 of the older style 91mm scissor springs (non hook type) and they can actually be cut to fit the 84 mm frame perfectly. I was blown away when I figured that out. I'm not quite done, just proved to myself it works, but I will update with pix to show what I did.

                  Now I'm going to have to dig through my parts boxes and see if I can find any of those older 91mm scissors springs you're talking about. :ahhh
                  Making this work on the smaller springs I'm currently using is a lot of busywork/trouble/(fun!), but having a spring that would eliminate most of that would be awesome, though I guess the added problem of having to drill all the tools out for the larger holes/pins might offset that. Be nice to find some thin brass/copper/something tubes to resize the holes, maybe just some rolled up brass sheet of the right thickness would work.. Anyway, pics please! :pok:

                  Yep you could make a bushing.. or fill the hole with soft metal like brass and redrill a hole.. OH actually you know what might work, fill it with JB weld (or maybe epoxy, but jb weld is better with metal) then redrill. Ive used that to repair the inside of bad scale drill jobs and it worked out well. The center pin doenst even move on that pivot so I bet that would work. Just clamp on another backspring to use as a drill guide to make sure the hole lines up!

                  1 Reply Last reply
                  • Neil Offline
                    Neil
                    Posts: 15,287
                    Neil Offline
                    Neil
                    wrote on last edited by
                    #14 Quote Reply

                      This is some serious hard work you've put in :salute: Well done.

                      I think the CT spacer would look better in metal than wood. That's personal though and there seem to be plenty digging the wood :)

                      1 Reply Last reply
                      • Glynn Offline
                        Glynn
                        Posts: 29
                        Glynn Offline
                        Glynn
                        wrote on last edited by
                        #15 Quote Reply

                          @Neil said:
                          I think the CT spacer would look better in metal than wood. That's personal though and there seem to be plenty digging the wood :)

                          Thanks!

                          I agree it would look better in metal, though the right combination of wood and metal has it's place as well. It's just faster (at least with my current tools) to make prototype pieces from wood, and I don't have any type of metal on hand thicker than 0.8mm brass sheet, unless I start cutting up SAK backsprings or something. For now, the wood is just temporary to make it fit and balance the spring out, though I am still trying to work out some kind of bit holder or other filler. I mostly don't use that many different bits, and could probably get away with the one in the driver and one more in a holder, which probably leaves room for T&T and maybe a pen, if I can fit it all in somehow.. Would be nice if there was a space to actually HOLD the pen while using it too; like on the 91mm, the pen fit very well under the scissors hook, pretty much turning the whole knife into a pen, but no hook on here means that's not an option.

                          Also, as much as I use a usb flash drive, I might add another layer to this, ~3mm thick, to hold a verbatim tuff 'n' tiny. That would only fill half a layer though, so I'd have room for... something. Not sure what to fill it with, either T&T/pen/extra bit that just won't fit under the cybertool, or something else completely: maybe an LED and coin cell battery, or something else.

                          Still very much a WIP, and I'll try to update a little more often than I have been, though no promises.

                          1 Reply Last reply
                          • Gareth Offline
                            Gareth
                            Admin Team
                            Posts: 37,725
                            Gareth Offline
                            Gareth
                            Admin Team
                            wrote on last edited by
                            #16 Quote Reply

                              Simply superb work Glynn. :cheers:

                              1 Reply Last reply
                              • Neil Offline
                                Neil
                                Posts: 15,287
                                Neil Offline
                                Neil
                                wrote on last edited by
                                #17 Quote Reply

                                  Rather than sheets of brass perhaps a lump of aluminium could be fashioned to fit. Easy to work with and you're more likely to have a scrap bit of aluminium than scrap brass kicking around. Old cookware, hard drive enclosures, ladder rungs* It'd match with the scales as well :)

                                  • can make you unpopular if ladder is still used.
                                  1 Reply Last reply
                                  • Santos Offline
                                    Santos
                                    Posts: 1,165
                                    Santos Offline
                                    Santos
                                    wrote on last edited by
                                    #18 Quote Reply

                                      Also dont forget you can sandwich layers of thin sheet metal to make bigger pieces and they are easier to cut... you just need lots :)

                                      This is so awesome, but extremely labour intensive, but it goes to show that any of the other 91mm tools are possible candidates. Someone is coing to decide that their 91mm metal saw, fish scaler or pliers are simply to big and need to scale it into a 84mm package :rofl:

                                      1 Reply Last reply
                                      • richs2891 Offline
                                        richs2891
                                        Posts: 123
                                        richs2891 Offline
                                        richs2891
                                        wrote on last edited by
                                        #19 Quote Reply

                                          That some amazing work there, have to agree while I like the wood, I wonder if either brass or aluminium would give it a more finished polished factory look ?
                                          OR even layered carbon fibre so could have space for tooth pick and tweezers from a 58mm sak ?

                                          Just thoughts

                                          Richard

                                          1 Reply Last reply
                                          • Syph007 Offline
                                            Syph007
                                            Global Moderators
                                            Posts: 9,842
                                            Syph007 Offline
                                            Syph007
                                            Global Moderators
                                            wrote on last edited by
                                            #20 Quote Reply

                                              I'd go with a piece of hardened 6061 aluminum or titanium, or 12 GA stainless is already the right thickness at 0.105 inches thick.

                                              But prototyping with wood makes alot of sense since it's cheap and easy to work with. I kind of really like the idea actually for prototyping. I need to make a cybertool bit holder for my 93mm alox mod and I think wood would work for a quick mock up, then I can pin it to some metal and mill that prototype shape in metal using the wood as a guide.

                                              1 Reply Last reply
                                              • tattoosteve99 Offline
                                                tattoosteve99
                                                Posts: 6,326
                                                tattoosteve99 Offline
                                                tattoosteve99
                                                wrote on last edited by
                                                #21 Quote Reply

                                                  Or you could use a old broke blade. I've done this more than once and that way it's already a perfect fit (for the stop only).

                                                  1 Reply Last reply
                                                  • Syph007 Offline
                                                    Syph007
                                                    Global Moderators
                                                    Posts: 9,842
                                                    Syph007 Offline
                                                    Syph007
                                                    Global Moderators
                                                    wrote on last edited by Syph007
                                                    #22 Quote Reply

                                                      @Glynn said:

                                                      @Syph007 said:

                                                      What I found was like you hole drilling in the scissors was key. I have about 10 of the older style 91mm scissor springs (non hook type) and they can actually be cut to fit the 84 mm frame perfectly. I was blown away when I figured that out. I'm not quite done, just proved to myself it works, but I will update with pix to show what I did.

                                                      Now I'm going to have to dig through my parts boxes and see if I can find any of those older 91mm scissors springs you're talking about. :ahhh
                                                      Making this work on the smaller springs I'm currently using is a lot of busywork/trouble/(fun!), but having a spring that would eliminate most of that would be awesome, though I guess the added problem of having to drill all the tools out for the larger holes/pins might offset that. Be nice to find some thin brass/copper/something tubes to resize the holes, maybe just some rolled up brass sheet of the right thickness would work..
                                                      Anyway, pics please! :pok:

                                                      Here you go Glynn. I was going to wait until my mod was done to post these, but they are relevant to your thread since we both have the same goal of getting 91mm scissors on an 84mm frame.

                                                      This one is for my 84mm hard anodized urban pioneer with scissors. So it will have awl/blade - scissors - openers with brass liners and hard anodized black scales. It was a challenge mod for me to see if it was possible.

                                                      This is a rough fit up to prove it works, I still need to sand/polish/buff but it absolutely works. The 84mm spring I made is from a single 91mm spring. It's possible to cut it better than I did to have more spring contact between the rest and spring, but this one works fine, I'm just being picky for the next one I make. The great thing about using a scissor spring is its the perfect thickness for scissors!

                                                      Cheers, and keep on modding and posting your work too please, love to see it!

                                                      1 Reply Last reply
                                                      • Glynn Offline
                                                        Glynn
                                                        Posts: 29
                                                        Glynn Offline
                                                        Glynn
                                                        wrote on last edited by
                                                        #23 Quote Reply

                                                          @Neil said:
                                                          Rather than sheets of brass perhaps a lump of aluminium could be fashioned to fit. Easy to work with and you're more likely to have a scrap bit of aluminium than scrap brass kicking around. Old cookware, hard drive enclosures, ladder rungs* It'd match with the scales as well :)

                                                          • can make you unpopular if ladder is still used.

                                                          There's a 40 foot aluminum ladder out back, I guess I could try.. Where's the best metal: from near the top of the ladder, the bottom, or right out of the middle? OR.. maybe I could use the whole thing! All new 12192mm SAK with a ladder layer! Also, the gaps are big enough you could fit all sorts of other tools in the extra spaces! The ultimate 2 person EDC? If I work at it, should be done by next Sunday. :D

                                                          @Santos said:
                                                          This is so awesome, but extremely labour intensive, but it goes to show that any of the other 91mm tools are possible candidates. Someone is coing to decide that their 91mm metal saw, fish scaler or pliers are simply to big and need to scale it into a 84mm package :rofl:

                                                          Metal file/saw is probably possible, since the size is about right, if you can get a hole drilled through it, I'm guessing it's hardened more than some of the other tools?
                                                          Fish scaler very likely to work as well, though I don't have one sitting around atm, so I can't compare. Same with the wood saw.
                                                          Pliers though.. I doubt it. It's longer than the scissors by 4-5mm, at least, and the scissors barely fits. You could probably round the tip off saving a few mm, but I don't think even that would be enough. I think pliers will have to stay on the 91mm+ frames.

                                                          @Syph007 said:
                                                          Here you go Glynn. I was going to wait until my mod was done to post these, but they are relevant to your thread since we both have the same goal of getting 91mm scissors on an 84mm frame.

                                                          Thanks! I do appreciate it. It's nice to have some comparison to work with; alternate ways of doing things. And, it's good for anyone else trying the same thing, the more pics the better!

                                                          1 Reply Last reply
                                                          • ICanFixThat Offline
                                                            ICanFixThat
                                                            Posts: 4,534
                                                            ICanFixThat Offline
                                                            ICanFixThat
                                                            wrote on last edited by
                                                            #24 Quote Reply

                                                              Wow! I missed this thread, 91mm Scissors and Cyber Bit-Driver in 84mm :drool: :drool: :drool:

                                                              That's Amazing! :salute: :salute: :salute:

                                                              1 Reply Last reply
                                                              • Jake Offline
                                                                Jake
                                                                Posts: 13
                                                                Jake Offline
                                                                Jake
                                                                wrote on last edited by
                                                                #25 Quote Reply

                                                                  Sorry for bumping an old thread, but I'm probably going to attempt this 91mm scissor conversion, and I wanted to get it right on the first try. I firgure its better to keep the discussion in one thread if people are searching for info on this mod. (like I have been)

                                                                  I'm hoping that someone can sanity check my plan before I start grinding.

                                                                  My plan is to grind the tang 7.5mm wide (similar to a Cadet nail file). This means that it should work with a standard 84mm knife layer backspring (with a custom rest/spacer at the other end); though I still have to figure out what to do about thickness, as the scissors are 0.15mm thicker than a sissors layer.

                                                                  Since I want to keep the griding as simple as possible, so my plan is to drill the new hole (carbide bit) slightly off-center from the original hole, so that after grinding a straight bottom edge, the new hole will be centered in the 7.5mm tang. Then, grind the notch so that doesn't interfere with the backspring when opened.

                                                                  I'm probably going to use a dremel & grinding wheel to do the grinding and finish with a diamond burr. I have considered putting the grinding wheel bit in the mill and trying to take small passes with it to insure a straight edge grind-- but I'm not sure how well this would work.

                                                                  Thanks for any suggestions.

                                                                  1 Reply Last reply
                                                                  • crackout Offline
                                                                    crackout
                                                                    Posts: 864
                                                                    crackout Offline
                                                                    crackout
                                                                    wrote on last edited by crackout
                                                                    #26 Quote Reply

                                                                      You might not need to slim the height (B). Just drill a new hole close to stock one and then shape the round back.

                                                                      Also, you should rather grind stepwise and test fit instead of grinding off a predefined amount.

                                                                      1 Reply Last reply
                                                                      • PTRSAK Offline
                                                                        PTRSAK
                                                                        Posts: 4,776
                                                                        PTRSAK Offline
                                                                        PTRSAK
                                                                        wrote on last edited by
                                                                        #27 Quote Reply

                                                                          ^^ agree,

                                                                          I've done this too and small amounts of grinding with LOTS of test fitting is the way to go.

                                                                          1 Reply Last reply
                                                                          • Don Pablo Offline
                                                                            Don Pablo
                                                                            Posts: 15,329
                                                                            Don Pablo Offline
                                                                            Don Pablo
                                                                            wrote on last edited by Don Pablo
                                                                            #28 Quote Reply

                                                                              A tragedy that the pictures for this stupendous mod are gone. :( It deserves to be seen.

                                                                              I was thinking of attempting to recreate this awesome cybertool mod. :think: Doesn't seem like anyone else has done it since Glynn.

                                                                              1 Reply Last reply
                                                                              • MohiLond Offline
                                                                                MohiLond
                                                                                Posts: 6
                                                                                MohiLond Offline
                                                                                MohiLond
                                                                                wrote on last edited by
                                                                                #29 Quote Reply

                                                                                  Thank you for sharing.

                                                                                  1 Reply Last reply

                                                                                  Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                                                                                  Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                                                                                  With your input, this post could be even better 💗

                                                                                  Register Login

                                                                                  • 1
                                                                                  • 2
                                                                                  1. Home
                                                                                  2. Tool Talk
                                                                                  3. The Mod Squad
                                                                                  4. 84mm Alox Cybertool w/ 91mm scissors (WIP) (Pic heavy)
                                                                                  Reply
                                                                                  • Reply as topic
                                                                                  Log in to reply
                                                                                  COMMUNITY LINKS
                                                                                  EDC-TV SAKWiki GearFeed SAKSelector
                                                                                  Operational Funds

                                                                                  Help us keep the Unworkable working!

                                                                                  Make A Donation
                                                                                  November Goal: $300.00
                                                                                  Due Date: Nov 30
                                                                                  Total Receipts: $0.00
                                                                                  Below Goal: $300.00
                                                                                  0% funded
                                                                                  • Login

                                                                                  • Don't have an account? Register

                                                                                  • Login or register to search.
                                                                                  • First post
                                                                                    Last post
                                                                                  0