And so it begins.... (My adventures into Alox!)
-
@nj2656 said:
Not sure if you've seen it or not but on the old SOSAK site Scibeer did a mod on an phillips. Not sure all the details but there were lots of pics. Maybe of use. I will be contacting you in the near future for a a Cadet with that mod plus the 93 awl and 91 scissors. Work out all the bugs cause I can't wait.

I'll have to take a look. The only mod I've seen so far with a philips on a cadet was this one.
Getting the philips on the bigger 93mm frame works no problem, but on the 84mm it's much trickier.
-
That is what I call a fantastic mod, very interesting. It may be a little unorthodox but it is very clever!
I think I can blame you for getting me, more and more, into Alox SAK's!! Hopefully in the near future I may put my hands into one of your beauties!!

-
The mod was on a cellidor but in theory I would think it would translate over.
-
Another possible alternative maybe would be to shorten the cap lifter instead. Looks to have plenty of metal and that would aid in the length of the Phillips???
-
Nice job
keep up the good work,, JR -
That's an awesome mod. I was looking at that and thinking that the student has surpassed the master but then...
What about just filing a few notches in the right places to make a sort of sear catch mechanism? Something like if you removed the black areas in this picture,

What you have looks slick but seems like a lot of work filing and fitting. I'd treat it like a firearms sear and build a simple block with pins to put the spring and driver on. Then drill a bigger hole through the block in the area where the sear catch will be filed so you can slip the file through there and swing either the driver or spring out of the way as you file the other. If it has a hard snap as is maybe a little relief in that area will make it snap less hard and make it easy on that little catch.
I played with my first 84mm this weekend and I've decided to leave them all up to you. Just let me know if anybody asks you for ti scales. I've got 4 of those long drivers, 2 have worn tips so they might be good to practice the catch filing on. I'll send them to you in your next care package with the Ti 93 scales.
-
@bushidomosquito said:
That's an awesome mod. I was looking at that and thinking that the student has surpassed the master but then...What about just filing a few notches in the right places to make a sort of sear catch mechanism? Something like if you removed the black areas in this picture,

What you have looks slick but seems like a lot of work filing and fitting. I'd treat it like a firearms sear and build a simple block with pins to put the spring and driver on. Then drill a bigger hole through the block in the area where the sear catch will be filed so you can slip the file through there and swing either the driver or spring out of the way as you file the other. If it has a hard snap as is maybe a little relief in that area will make it snap less hard and make it easy on that little catch.
I played with my first 84mm this weekend and I've decided to leave them all up to you. Just let me know if anybody asks you for ti scales. I've got 4 of those long drivers, 2 have worn tips so they might be good to practice the catch filing on. I'll send them to you in your next care package with the Ti 93 scales.
Hmm a sear catch. That could work, but that might be more fiddly for me to make. It only took me 15 minutes to add the rest this way. Drill hole, use belt sander to open it up, then belt sand a matching nub to fit it, then add that and belt sand to tidy up the length. I'm not saying its the ultimate solution, I just couldn't think of anything easier at the time while not compromising the spring itself.
No love for the 84s for you? The appeal for me is that the center hole matches the hole from the 91s so moving parts from 91->84 is actually easier than 91->93. 93s are still the king for toughness and the big boy mods though. :D
-
Yeah, I've only gotten one request for 84 that I'm doing with ti scales with the integral clip like my Ramblers. I've got my hands full with those Ramblers anyway and I have a lot I want to do with G10 91s when the first run of liners is done. I need to get those down to around $100 over donor cost. I'm learning my lesson about letting my plate get too full.
-
I started doing a fit up with this new Philips layer on a cadet with scissors. Brass liners and hard anodized black scales.





It's looking pretty so far, and I'm still loving the brass. It took me ages to get those liners made up as I had to create new routing templates for the 84mm size, but they did turn out nice at least so the effort was warranted.
That old 91mm Philips/mag spring never looked so good. The nice thing about old metal is that its still new on the inside. Vic steel takes a nice polish.
Cheers!
-
Not sure if you've seen it or not but on the old SOSAK site Scibeer did a mod on an phillips. Not sure all the details but there were lots of pics. Maybe of use. I will be contacting you in the near future for a a Cadet with that mod plus the 93 awl and 91 scissors. Work out all the bugs cause I can't wait.

I'll have to take a look. The only mod I've seen so far with a philips on a cadet was this one.
Getting the philips on the bigger 93mm frame works no problem, but on the 84mm it's much trickier.
Here's the link to Scibeer's 84mm special including Phillips screwdriver. http://www.sosakonline.com/index.php?option=com_content&task=view&id=220&Itemid=35
Great looking mod BTW Syph. 8)
-
Not sure if you've seen it or not but on the old SOSAK site Scibeer did a mod on an phillips. Not sure all the details but there were lots of pics. Maybe of use. I will be contacting you in the near future for a a Cadet with that mod plus the 93 awl and 91 scissors. Work out all the bugs cause I can't wait.

I'll have to take a look. The only mod I've seen so far with a philips on a cadet was this one.
Getting the philips on the bigger 93mm frame works no problem, but on the 84mm it's much trickier.
Here's the link to Scibeer's 84mm special including Phillips screwdriver. http://www.sosakonline.com/index.php?option=com_content&task=view&id=220&Itemid=35
Great looking mod BTW Syph. 8)
Oh awesome thanks for the link.

-
She sure looks nice with brass liners!

The Scibeer mod looks really good too. Looks like he end up with more material for a stronger driver. The magnifier must be slightly shorter, or is there another reason?
-
This latest experiment is gonna be great

As for that Scibeer link - been a while since I've seen it - genius

-
@ICanFixThat said:
She sure looks nice with brass liners!

The Scibeer mod looks really good too. Looks like he end up with more material for a stronger driver. The magnifier must be slightly shorter, or is there another reason?
Yep I was just comparing the two parts, the magnifier is about 1/4 inch shorter than the cap lifter so pairing the Philips with that you get to keep more metal.
The only think I don't like about his mod was not using a wide enough backspring. It's a pet peeve of mine to have components thicker than backsprings so there are gaps in the back. Also he should have put a bushing on the mag glass, he may have but it doesnt say. It probably doenst matter, but its another thing that bugs me if the pivot holes are too big for the pivots.
Also I dunno about heating the part to drill it, that feels wrong to me too. Maybe back then carbide bits cost alot? I get them for about 5 bucks when I buy them in packs. The older vic steel is softer than modern too, and I have no issues popping a hole through the fully tempered part, its a 5 second job.
-
No doubt things can always be improved - it's the body of work that counts

Between you all, some lovely things have been created.
-
Ya I like looking at the evolution of the modding techniques as much as looking at the evolution of the Victorinox manufacturing and tools themselves.
It's a good way to realize even the "simple pocket knife" is not so simple if you really study it. They sure got a big break from nature though with the development of corrosion resistent metals.
-
I finished getting this 3 layer cadet together. No keyring, smooth all the way around. I'm still in love with the brass liners so I will for sure keep making up some more of these.



I was proud of this part. This is the scissor spring from the 91 that I cut down and fit so it's two separate parts. I got it nice and contoured to the scale this time so all you see is that tiny line between the two parts. The next best solution here is the original 84 mm scissor spring or making a custom one.




-
Brilliant

-
@Syph007 said:
I finished getting this 3 layer cadet together. No keyring, smooth all the way around. I'm still in love with the brass liners so I will for sure keep making up some more of these.....

....
I was proud of this part. This is the scissor spring from the 91 that I cut down and fit so it's two separate parts. I got it nice and contoured to the scale this time so all you see is that tiny line between the two parts. The next best solution here is the original 84 mm scissor spring or making a custom one.
....
OMG! Absolutely Fantastic!!

-
Mate that looks
& what a great tool set 8)

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login