And so it begins.... (My adventures into Alox!)
-
@crackout said:
A few more things I'm currently thinking about.I hate the keyring spacer so much. It ruins the entire smooth feel of the alox models. Can someone hook me up with a non-ring spacer, maybe?
I'm still waiting for my Donor-Solo to arrive and I was wondering what blades they used before discontinuing this model. I read on the Wiki that some came with bent blades and some had straight ones. Since I will use the Solo spring for the scissors layer of the Pioneer, the Solo blade always had the replacement blade role. I'm hoping for a bent blade on mine. Anyone with insight in which blades were used at what time?
Next thing: Awl replacements. There's this Settler Pioneer that sports a small blade. However, it's sold out everywhere. I guess these small blades are as thick as the awls? Using a small blade from the 91mm range is no workaround for me. It's just not sturdy enough to go along with the rest of the Pioneer. That said, I'm highly interested in blade layer tools (small blade, pruner or electrician); if someone doesn't need them anymore. :)
Tomorrow, the screws (and hopefully the Solo) arrive. Exciting!
I'm parting 3 ringless farmers this week so I can hook you up with the ringless spacers and a pruner blade as well as some extra liners if you need them. Just PM me.
-
@Syph007 said:
Ok I can sense your enthusiasm and mod addiction growing! LOL.It's getting worse any minute. :D
When people request to have no keyring on a custom, I use a liner as a guide and scribe a smooth line on the keying part to show where to remove the nub. Grind that off, then sand and polish and you wont even know that part used to have a nub.
That was the plan, however the grinder I have access to is pretty darn garbage (see what I did to that phillips :P). That's why I was looking for a stock one.
Solo blades came in a variatey of krink (bent) stages. None of then will fit in a multilayer alox as is however, whether they are perfectly straight or bent. If you look at a farmer/pioneer the main blade actually extends into the area above the liner, meaning on a solo it would be in the scale. That being said Ive put a bend in a blade from a solo to fit, you just have be careful but the blades do bend. Clamp it protected in a vice, and use a mallot. Ive tweaked a few tools this way by a few degrees.
That's tragic. Then I guess I'll have to bend it. So you really use instant force (hits with a hammer) to achive a bent instead of a continuous pushing?
@bushidomosquito said:
I'm parting 3 ringless farmers this week so I can hook you up with the ringless spacers and a pruner blade as well as some extra liners if you need them. Just PM me.Sir, PM sent.
-
Would this work, Electrician blade, large blade, scissors, cap lifter, phillips. I am working on a red scale with brass liner for an edc. Love having an awl but thinking a small blade would get used more.
-
@nj2656 said:
Would this work, Electrician blade, large blade, scissors, cap lifter, phillips. I am working on a red scale with brass liner for an edc. Love having an awl but thinking a small blade would get used more.Yep that tools combo would work. The electricians blade needs a tweak in the other direction, but it will fit. Same as the pruner blade needs that to nest in with the main blade.
-
But only those pruner blades that are mounted in the caplifter layer normally.
There are Pioneers that already have the blades nested next to the large blade (Settler, Pruner, Apprentice).


Or am I wrong?
-
Ah yes, those are even more rare to find for parts. Ive only had the ones that come from opener layer SAKs.
-
Do they vary in thickness?


Pretty confusing. ;)
-
-
So I guess they use a thinner spacer then. Just from the looks I'd say the awl is thinner than the can opener.
-
-
The electricians blade on the Pioneer Apprentice (53965) is bent to the side to make room for the knife blade, on the Electrician (53781) it's straight. There's also a slight variation at the tip. Also, the spacer is on the other side.
Pioneer Apprentice always on the left:




-
@enki_ck said:
The electricians blade on the Pioneer Apprentice (53965) is bent to the side to make room for the knife blade, on the Electrician (53781) it's straight. There's also a slight variation at the tip. Also, the spacer is on the other side.Pioneer Apprentice always on the left:
Thanks for the pics!
Looks like they are a different blade stamp, the nail nicks are different size. I figured they had to be bent though or there is no way to fit them. -
What do you use as springs for the Pliers nowadays? Still beefcaked saw springs?
-
-
What do you use as springs for the Pliers nowadays? Still beefcaked saw springs?
Ya, it means turning 2 farmers into pioneers for the springs, but they work so nice.
What happened to the custom springs?
I thought you had them made in different thicknessesDon't have them yet, BUT, they are in the mail on their way to me. The shop we were having grind them to the right thickness failed to do it, so Im going to make up something to hold it parallel to my bench belt sander, and surface them that way.
-
What do you use as springs for the Pliers nowadays? Still beefcaked saw springs?
Ya, it means turning 2 farmers into pioneers for the springs, but they work so nice.
What happened to the custom springs?
I thought you had them made in different thicknessesDon't have them yet, BUT, they are in the mail on their way to me. The shop we were having grind them to the right thickness failed to do it, so Im going to make up something to hold it parallel to my bench belt sander, and surface them that way.
Aaah. Well at least they're on their way! No more buying Farmers :D
-
How much do you have to take off? For pliers I mean.
-
@tattoosteve99 said:
How much do you have to take off? For pliers I mean.The 440c stock was 0.155 and I think pliers are 0.125. Im going to leave 5 thou on each side for a washer, so Im going to shoot for 0.135. Ive reduced blades and what not on the bench belt sander so It'll work. Its just a matter of making it even across the whole surface. And of course doing 200 of them manually is crazy. Only doing a few to get going manual, while a better shop is sought.
-
While you guys are talking decimal points I got a question. Is there enough space opposite the Phillips to put two tools, say the cap lifter and electricians blade? I know nothing of the way the springs work or what not. I was just staring at my yeoman wondering. Cause between here and the Yeoman thread I have three different knives built in my head that I want.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login