And so it begins.... (My adventures into Alox!)
-
May I see the other side? :D
Crazy mod! -
-
That's great. I like the idea of OHO blades on SAKs but thought they would ruin the over all look... not so!

-
It doesn't look like it but is the thumb stud drilled and tapped or does it just go over the top? Reason I'm asking is as I mentioned to you I would like that mod but in a multilayer.
-
-
I just finished delicate surgery to upgrade a red old cross pioneer. This is my first colored stock anodize mod. They are much trickier to work with than say silver stock anodize, or my hard anodized scales. I cant countersink the center hole from the outside as I don't have the benefit of being able to re-anodize. If I tried to countersink in these scales there would always be some rough edges showing around the screw and to me that's not acceptable.
So to do these type of mods I drill 1/8 from inside the scale in the center hole, careful to not go all the way through, then use smaller head screws from the outside. It works out perfect, it's just much more fiddly. Im reminded when I work with stock ones though how much I prefer my redone scales. I take the time to edge sand the inner edges of the scales that Vic does not and leaves sharp. That sharp edges is prone to chipping much more than mine does after gentle rounding.
You have to love the look of the old cross though, it's by far my favorite of the alox scales!






Cheers!
-
Delicious!


-
Have to agree with you on the old cross style. Love it.

-
Nicely done!
-
Looks great but not your first. My pocket clip Urban was factory black anodized. Every once and awhile I can feel a slight burr but can not see it. No big deal it'll wear off. Anodizing is starting to wear. Can't wait for the blue jean finish.
-
@nj2656 said:
Looks great but not your first. My pocket clip Urban was factory black anodized. Every once and awhile I can feel a slight burr but can not see it. No big deal it'll wear off. Anodizing is starting to wear. Can't wait for the blue jean finish.Oh you're right I'd forgotten that black alox. The stock Vic anodize does wear pretty quick compared to the HA stuff. I have one set of red scales with a ding on the finish Im thinking of sanding the top of them to get them a worn look just for fun. Noone has carried one of mine long enough yet to get any natural wear.
-
That stuff is so hard I don't think my 7 year could wear it out. He can wear ANYTHING out. Recently got an old cross red pioneer. Really like it, and really fighting the urge not to have it modded.
-
Just opened up the package containing my Syph007 mod.
It's so awesome!I've dubbed it the Alox Climber. (Urban pioneer with small blade instead of the Awl.)
Syph007, thanks for all the hard work that went into making it a reality.
-
@heardrwt said:
Just opened up the package containing my Syph007 mod.
It's so awesome!I've dubbed it the Alox Climber. (Urban pioneer with small blade instead of the Awl.)
Syph007, thanks for all the hard work that went into making it a reality.
Glad it made it to you safe, and I hope it serves you well!

-
@heardrwt said:
Just opened up the package containing my Syph007 mod.
It's so awesome!I've dubbed it the Alox Climber. (Urban pioneer with small blade instead of the Awl.)
Congrats! I noticed the small blade being mentioned. Spear point, Settler style? Or another small blade? It looks we got at about the same time a similar custom from Robert :) because I just got also an Urban Pioneer (Pioneer with scissors) with a small spear point blade instead of the awl. Could you or Robert post some pics or links to pics?
Robert, one more BIG thanks to you!

-
Just opened up the package containing my Syph007 mod.
It's so awesome!I've dubbed it the Alox Climber. (Urban pioneer with small blade instead of the Awl.)
Congrats! I noticed the small blade being mentioned. Spear point, Settler style? Or another small blade? It looks we got at about the same time a similar custom from Robert :) because I just got also an Urban Pioneer (Pioneer with scissors) with a small spear point blade instead of the awl. Could you or Robert post some pics or links to pics?
Robert, one more BIG thanks to you!

That custom can be found in this album.

http://s1117.photobucket.com/albums/k587/Syph007/Custom048/

-
Cool! So is that small blade from a Settler (93mm)? Seems a bit thicker than one from 91 mm like I got. Or is just the thicker spacer? Here:

-
@Marius said:
Cool! So is that small blade from a Settler (93mm)? Seems a bit thicker than one from 91 mm like I got. Or is just the thicker spacer? Here:
Nope regular pen knife blade from 91mm SAK. They are 0.015 inches thinner than the awl being replaced and I add a washer of phosphor bronze of that thickness between blade and spacer to compensate. Same as I did to your mod.
-
I was just looking at the thickeness difference between the Settler blade and one from 91 mm. I wonder if the washer can be skipped with a Settler blade. The profile is exactly the same on both, but thickness is different. It looks 1 mm for 91mm and 1.4 mm (?) for Settler.
-
@Marius said:
I was just looking at the thickeness difference between the Settler blade and one from 91 mm. I wonder if the washer can be skipped with a Settler blade. The profile is exactly the same on both, but thickness is different. It looks 1 mm for 91mm and 1.4 mm (?) for Settler.Ah, I see. Is the settler blade the same thickness as the awl then?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login