THE Crunch Owners Thread
-
@stealth007s said:
I own one and I love it. I actually found mine on the ground next to my vehicle on our way into Iraq. It stays in the center console of my SUV. Handy dandy MT!¡!
You have a picture of that? Never seen a black oxide Crunch before
-
No, it's not BO. I was referring to the Crunch not the post you put up

-
Yesterday I replaced the balancing springs in a window in my apartment. The clips are attached to a thick string and are under a lot of tension. I was able to get one attached using a Vic Spirit but not without getting a few cuts and scrapes. For the second one I extended the clip and then used the Crunch to clamp it off. Ahhhh, so much easier. Vise grip pliers expand the functionality of pliers to a great degree. Their functionality is really a multi-tool in and of itself :)
-
Can I be part of the group. Was giving this bad boy today. Soaked it in some dawn, cleaned up ok. Cool thing is I have already put it to work, the vise grips work better than I thought.

-
Wow, what an awesome gift to get!
-
Greetings forum members. Although I'd like to own a Crunch, I already EDC a new Charge TTI, which I love, by the way. So I can't see springing for the bucks for a Crunch too, as I already carry the equivalent extra tools found in that model. But I'd also like to have the vise grip capability on my person at all times. I hit upon the idea of acquiring a 4" Irwin 4WR Vise Grips, which are quite cheap at only $9 right now, and EDC that along with my TTI. Has this idea occurred to anyone else? It will just be loose in my pocket, or maybe in my jacket pocket during the upcoming cold months. Anyway it arrives in the mail tomorrow so I'm going to try it out. I don't think I'll be using it all that much but it would be nice to have in that odd situation where I need to hold something down.
-
@Captain Crunch said:
Greetings forum members. Although I'd like to own a Crunch, I already EDC a new Charge TTI, which I love, by the way. So I can't see springing for the bucks for a Crunch too, as I already carry the equivalent extra tools found in that model. But I'd also like to have the vise grip capability on my person at all times. I hit upon the idea of acquiring a 4" Irwin 4WR Vise Grips, which are quite cheap at only $9 right now, and EDC that along with my TTI. Has this idea occurred to anyone else? It will just be loose in my pocket, or maybe in my jacket pocket during the upcoming cold months. Anyway it arrives in the mail tomorrow so I'm going to try it out. I don't think I'll be using it all that much but it would be nice to have in that odd situation where I need to hold something down.I think it is a great idea, I like the crunch a lot and have been trying to put in the edc but I always carry the wave. I will admit i needed it today over the wave.
-
@Captain Crunch said:
.. I hit upon the idea of acquiring a 4" Irwin 4WR Vise Grips, which are quite cheap at only $9 right now, and EDC that along with my TTI. Has this idea occurred to anyone else?...Welcome aboard. I have a Crunch and several small and larger Vise-Grips. I always carry a multitool and carried a small Vise-Grips in a jacket pocket for a while.

-
@Captain Crunch said:
Greetings forum members. Although I'd like to own a Crunch, I already EDC a new Charge TTI, which I love, by the way. So I can't see springing for the bucks for a Crunch too, as I already carry the equivalent extra tools found in that model. But I'd also like to have the vise grip capability on my person at all times. I hit upon the idea of acquiring a 4" Irwin 4WR Vise Grips, which are quite cheap at only $9 right now, and EDC that along with my TTI. Has this idea occurred to anyone else? It will just be loose in my pocket, or maybe in my jacket pocket during the upcoming cold months. Anyway it arrives in the mail tomorrow so I'm going to try it out. I don't think I'll be using it all that much but it would be nice to have in that odd situation where I need to hold something down.Welcome to the forum
I sometimes carry a 4" Vise Grip pliers with a Victorinox Yeoman instead of carrying a pliers based multitool. I've found that does work quite well for me, especially when you need pliers and drivers seperate (for holding a nut and turning a screw).I don't own a Leatherman Crunch myself, but recently got myself a cheapo knock-off version to play with. Quality aside, I find it quite an odd tool to try and use and I've not really "clicked" with the concept of it. I find the Schrade ST6 a lot more intuitive, but of course they're discontinued and harder to lay your hands on. I've not tried the Gerber Grappler though

-
Although the Crunch is an easier pocket carry than the small ViseGrip, I think the small ViseGrip is a much better deal for the money. If the file and knife were better or easier to use on the Crunch, I might feel differently, but aside from the locking pliers, all the other tools on the Crunch are definitely a compromise when compared to other full sized MT's.
-
A lot more ergonomic to use the additional tools on the Crunch than on the Schrade ST6 too :D
Having said that, as a "locking pliers with extras" I do prefer the ST6 overall. Not that I'm knocking the Crunch, but as the other tools are very much secondary and I'm unlikely to pocket carry either, I think I'd prefer to find the Vise Grips format in my toolbox/glove compartment rather than the Crunch

I wonder how difficult it would be to talk Mat out of his 5WR.

He'll find another one easily enough I reckon
:P :D :D -
Crunch in use.


-
Nope not going crazy. :ahhh I just really like my Crunch.

-
As I wrote here yesterday, I decided to try a small vise-grips tool as a substitute for a Crunch. I received my new Irwin 4WR Vise-Grips today, only $9.08 from Amazon, and free shipping with Prime! As you can see in the picture, it's about the same size, maybe a tad longer, than my Charge TTi. But it weighs far less, only 3.4 oz. versus the Charge's heavier 8.5 oz. I don't know what the Crunch weighs, but surely more than 3.4 oz. (I will carry one in each pocket, the Charge by means of its handy pocket-clip, and the Vise-Grips just loose). I can get the jaws to clamp down to 1 inch work, but just barely. Should be good enough for most spur-of-the-moment tasks. It looks like a winner. Although off-topic, I included my other EDC's in the photo, my Aimkon iTP A3 EOS 96 lumen flashlight and my "Split-pea" lighter.

-
@50ft-trad said:
A lot more ergonomic to use the additional tools on the Crunch than on the Schrade ST6 too :DHaving said that, as a "locking pliers with extras" I do prefer the ST6 overall. Not that I'm knocking the Crunch, but as the other tools are very much secondary and I'm unlikely to pocket carry either, I think I'd prefer to find the Vise Grips format in my toolbox/glove compartment rather than the Crunch

I wonder how difficult it would be to talk Mat out of his 5WR.

He'll find another one easily enough I reckon
:P :D :DAl you are killing me
:D.Funny you should mention the 5WR :o I got my second one a week or so ago :o.
I did used to use my 6LC occasionally , not sure I am so comfortable now days though
, they are going for CRAZY money lately :o.
The ST6 is my least favoured of the 3 , I am not such a fan of such Long n straight gripping jaws :-\ :-\ :-. -
The Crunch was my first "good" multitool, having previously owned a couple cheaper knock-off tools. Whenever I'm going to check something out on a vehicle or around the house I grab my Crunch sheath which has various Torx bits, a couple Philips bits, 1/4" socket driver, 1/4" bit holder.
My Crunch has been a useful companion for my projects, and has saved me a lot of time that would have been spent walking back-and-forth to my toolbox. The Crunch has done things most other multis cannot do. It is hands down, my favorite multitool. It doesn't do everything, but it's the first one I grab when I'm going to look at something.

-
@50ft-trad said:
A lot more ergonomic to use the additional tools on the Crunch than on the Schrade ST6 too :D
Having said that, as a "locking pliers with extras" I do prefer the ST6 overall. Not that I'm knocking the Crunch, but as the other tools are very much secondary and I'm unlikely to pocket carry either, I think I'd prefer to find the Vise Grips format in my toolbox/glove compartment rather than the Crunch

I wonder how difficult it would be to talk Mat out of his 5WR.

He'll find another one easily enough I reckon
:P :D :DAl you are killing me
:D.Funny you should mention the 5WR :o I got my second one a week or so ago :o.
I did used to use my 6LC occasionally , not sure I am so comfortable now days though
, they are going for CRAZY money lately :o.
The ST6 is my least favoured of the 3 , I am not such a fan of such Long n straight gripping jaws :-\ :-\ :-.:D
TWO 5WRs :ahhh :ahhh If you decide you only want one of them mate, give me a
:D Is the 6LC the one that looks like a multipurpose leg iron
:P - That's the one that would be no good to me. I must admit I do like long needle nosed pliers and blunt nosed. I do try to keep multi's with both at home and down at the boat. -
I started carrying Crunch at work when we had few back to back calls of kids with partial amputation of fingers that got stuck in a front bicycle crank when they were trying to put the chain back on. I bought the Gerber version of Crunch first thinking that newer must be better (wrong). I carry it and it got my pts and me out of some dicey situations. Pretty good tool for what it is.
-
@polak187 said:
I started carrying Crunch at work when we had few back to back calls of kids with partial amputation of fingers that got stuck in a front bicycle crank when they were trying to put the chain back on. I bought the Gerber version of Crunch first thinking that newer must be better (wrong). I carry it and it got my pts and me out of some dicey situations. Pretty good tool for what it is.Ouch!¡! Just OUCH!¡!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login