And so it begins.... (My adventures into Alox!)
-
@Syph007 said:
Oh for sure ya, any of the small blades would fit in the awl spot, electrician, pruner or small spear point. I 'think' i could put a cadet nail file on if I used my custom spring so I could make the spring end thicker. It sits too low if I use a regular blade spring. Well it works, but the nail nick is partially hidden, same thing if I try an 84mm combo tool there.So if you used one of your custom springs would it rise the nail nick higher then the scale? If so that would be a perfect combo! JR
-
Oh for sure ya, any of the small blades would fit in the awl spot, electrician, pruner or small spear point. I 'think' i could put a cadet nail file on if I used my custom spring so I could make the spring end thicker. It sits too low if I use a regular blade spring. Well it works, but the nail nick is partially hidden, same thing if I try an 84mm combo tool there.
So if you used one of your custom springs would it rise the nail nick higher then the scale? If so that would be a perfect combo! JR
Yep I think so at least. I was going to try it to be able to use combo tools from 84s, so it would work for the nail file too, I just have to try it.
-
Oh for sure ya, any of the small blades would fit in the awl spot, electrician, pruner or small spear point. I 'think' i could put a cadet nail file on if I used my custom spring so I could make the spring end thicker. It sits too low if I use a regular blade spring. Well it works, but the nail nick is partially hidden, same thing if I try an 84mm combo tool there.
So if you used one of your custom springs would it rise the nail nick higher then the scale? If so that would be a perfect combo! JR
Yep I think so at least. I was going to try it to be able to use combo tools from 84s, so it would work for the nail file too, I just have to try it.
Kool can't wait to see, fingers crossed! JR
-
another lovely job.
-
I always wondered, why torx screws? I know a lot of knifemakers use it but wouldn't a phillips or flat head screwdriver be more easily serviceable? I mean you could tighten a SAK with a SAK :ahhh
-
@enki_ck said:
I always wondered, why torx screws? I know a lot of knifemakers use it but wouldn't a phillips or flat head screwdriver be more easily serviceable? I mean you could tighten a SAK with a SAK :ahhhI think both looks, and that you can get more torque on a torx. For a pattern of the same radius, you hve 6 points of contact vs 4. I like the look of the torx over philips too. Other than that the most plain answer is that, that is what all the knife supply stores sell... so thats what i use. :D
-
I always wondered, why torx screws? I know a lot of knifemakers use it but wouldn't a phillips or flat head screwdriver be more easily serviceable? I mean you could tighten a SAK with a SAK :ahhh
I think both looks, and that you can get more torque on a torx. For a pattern of the same radius, you hve 6 points of contact vs 4. I like the look of the torx over philips too. Other than that the most plain answer is that, **that is what all the knife supply stores sell... so thats what i use. ** :D
I thought it was something like that. :D
-
Today's project was a simple two layer. Pruner/blade with scissors. It's a nice little knife. :D




-
I always wondered, why torx screws? I know a lot of knifemakers use it but wouldn't a phillips or flat head screwdriver be more easily serviceable? I mean you could tighten a SAK with a SAK :ahhh
I think both looks, and that you can get more torque on a torx. For a pattern of the same radius, you hve 6 points of contact vs 4. I like the look of the torx over philips too. Other than that the most plain answer is that, **that is what all the knife supply stores sell... so thats what i use. ** :D
I thought it was something like that. :D
Be even better if they were titanium! JR
-
May Syph lead me not in to temptation....
Yeah, right ::)
-
The idea of putting the Philips opposite of the openers is truly genius.

Question, though, it looks as though there has to be a layer between them and the blade layer to access the bottle opener nail nick. Is this correct? If so, does it have to be scissors, or would a wood saw still allow access to the bottle opener nick.
I'm also curious, does not having the bottle opener up against the liner make it weaker? As in, it would take less prying force to make something break?
I've got the mod lust a-brewin'

-
@gustophersmob said:
The idea of putting the Philips opposite of the openers is truly genius.
Question, though, it looks as though there has to be a layer between them and the blade layer to access the bottle opener nail nick. Is this correct? If so, does it have to be scissors, or would a wood saw still allow access to the bottle opener nick.
I'm also curious, does not having the bottle opener up against the liner make it weaker? As in, it would take less prying force to make something break?
I've got the mod lust a-brewin'

No the nail nick sticks up high enough it shouldn't matter what the middle layer is, a saw should work fine.
I would think it would be stronger this way. The prying tool between a liner and a steel tool, instead of a liner and a soft aluminum scale. The steel pivots I use are stronger than brass as well.
-
Someone is trusting me to work on a marlin spike mod! :D


-
Ive done a few rivet jobs and they are ok, but I really like to be able to take knives apart to clean them proper, thats the biggest advantage for me. As far as screws backing out, no chance with red loctite. They dont move unless you want them too.
-
Here is the marlin spike mod all done up with brass liners and a scissors layer added. I still love brass every time I use it. I think it has a warm look and just a touch of color.
This is the first time I ever put an awl in place of the can opener, but the customer wanted the awl still. At first I thought it wasn't going to work as it hit the cap lifter, but I ended up bending the cap lifter the other way, so the opposite side is flat. Usually the normal flat side being flat up against the scale, but in the way of the awl. I didn't think it would bend nicely, but it did after all and it fits perfect. That was a pleasant surprise, as my first mod attempt was to shorten and regrind the awl, but it looked awful so I needed a plan B.
Cheers







-
Nice job, love it
JR -
Very nice and I love the brass with the green

-
beautifull color!! good work!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
