Motorist on eBay - be careful
-
@jazzbass said:
Saw this today: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=230879570184This looks like a nice original Motorist, but I'm pretty sure it's a repair job. Here's the original knife: http://www.ebay.com/itm/Vintage-Swiss-Army-Knife-Victorinox-Sandoz-Multi-Function-Pocket-Knife-/230854502875
Unfortunately, the ad doesn't say it's a repair AND it looks like the seller used the wrong blade in doing his repair. The blade he used is a later appears to be a late 1970s 2.2mm Elinox blade instead of the correct late 1960s 2.7mm blade. If you're buying this as a collector's piece (and why else would you for $125), be careful and get details first.
Great to have people like you jazzbass in this forum!!

-
I want to know when the book is coming out. Great info as usual.
-
I want to know when the book is coming out. Great info as usual.
Reserve a copy for me also.

One also for me, jazzbass.
Send me a pm when you have them ready. :D -
My wife keeps telling me I should write a book on this stuff. I'll put you guys on the pre-order list :D
BTW, SAK-minutia wise, this auction actually led me to a new discovery: the 2.2mm Elinox blade (and 1.2mm pen blade). In 1974 Victorinox changed the thickness of their 91mm blades from 2.7mm to 2.4mm. This corresponds to the change in tang stamp, BTW, from "Victoria Officier Suisse" to just "Officier Suisse". Pre 1974, Elinox blades are the same 2.7mm thick. I always assumed that post 1974 when they went to the late style "Elinox" stamp (like shown in this auction) they did so on the same 2.4mm blades as the regular line. Not so, as it turns out.
I have five Elinox knives all from this time period (2 Campers, 2 Gourmets and one Spartan). All five have 2.2mm main blades and 1.2mm pen blades. Compare that to the same era Victorinox blades which are 2.4mm and 1.4mm, respectively. I guess it was part of the cost-cutting measure of the Elinox line at the time. All of these knives also have the low quality pot-metal corkscrew and cheap plastic scales (ABS?) as well.
The 84mm knives didn't seem to suffer the same fate - all of my Elinox branded 84mm knives have regular 2.5mm main blades, which is the same thickness as the contemporary Victorinox models. After the switch in the late 1970s from the "Elinox" stamp to the "Economy" stamp, the blade thickness gets a bit thinner at 2.4mm, as it also does for the Victorinox line.
-
@jazzbass said:
Saw this today: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=230879570184This looks like a nice original Motorist, but I'm pretty sure it's a repair job. Here's the original knife: http://www.ebay.com/itm/Vintage-Swiss-Army-Knife-Victorinox-Sandoz-Multi-Function-Pocket-Knife-/230854502875
Unfortunately, the ad doesn't say it's a repair AND it looks like the seller used the wrong blade in doing his repair. The blade he used is a later appears to be a late 1970s 2.2mm Elinox blade instead of the correct late 1960s 2.7mm blade. If you're buying this as a collector's piece (and why else would you for $125), be careful and get details first.
You are probably right. The buyer from damaged knife and the seller from the repaired knife have both the same feedback score (115) on ebay .... What a coincidence ::)
P.S. Where is the book ??? ;)
-
The knife relisted in auction for $50, http://www.ebay.com/itm/Victorinox-Automobile-Swiss-Army-Knife-Elinox-tang-St-Christopher-inlay-/230880332617?pt=Collectible_Knives&hash=item35c18a4b49
-
Looks like the seller reads this forum - the description has been edited to note that its been repaired. :D
I'd still be careful with this knife. I picked up an old long file Huntsman with a bad main blade to use as an EDC. Replaced the original 2.7mm Victoria blade with a 2.4mm Officier Suisse blade. The knife was never quite right. The blade didn't snap well and would bind up. Victorinox knives work like they do because of tight tolerances. 2.7 to 2.2mm is way to much IMO.
-
Nice thread! Is always good to learn something new about the technical specifications.....and by the way, one more here on the pre-prder list for the book. :D
-
Me next in line on the jazzbass book

-
Jazzbass, I'm also interested on your book, for pre-order, do you accept paypal?
-
Pm sent...

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login