Rebar Owner's Club (pic heavy)
-
In the club! :D. Just picked up a rebar the other day as a backup to the wave i've EDC'd for the last 4 years. I own a powerlock, a fuse, a kick, a blast, a charge al, a surge and numerous victorinox SAK's but none could take the place of my trusty wave... Until now of course. I don't know what it is but this thing is a joy to carry / use. I love it and now all I need is the rebat and my SOG twitch II and i'm good
-
Has anyone replaced the wire cutters on the Rebar yet?
I mainly want this tool for the replaceable wirecutters.(ST300, too big for me) I wouldnt baby it as much or be afraid of damage. Just wondering what everyone experience is with them.
Do they work as well as the wire cutters on a wave? Better? easy to change? How much are replacements?
-
Mine was decapitated.

-
I got a Rebar during the summer and have used it a lot. Its my favourite multitool at the moment. It replaced my wingman in my go fix in the cabin/bike/anything micro toolpouch.

-
I want a BO rebar for Christmas, but unfortunately I will be unable to do so ;(. Doctor appts, kids, a week off with no pay has set me in a hole :(.
-
I recieved a new in the box Rebar from Tosh, I've been edc'ing it for about a month or so and havent looked back, its been great, it's like a heaier duty pst.
-
Hey all,
I've just joined the site and have just finished commenting on the Spirit owners club and Charge owners club forums, so I figured I may as well join this one as well to round out my three favorite multitools and be a member of each owners' club :DI do enjoy the Rebar quite a bit with it's sleekness and light weight, while still managing to pack in quite a wallop of tools. One thing it has that my other faves do not is the ruler on the outside, which has come in handy more than one may think for quick measurements of smaller items. The only think it's missing is scissors, but I've found that the wire cutters can do most scissor jobs that I find, with the exception of cutting paper or trimming any stray whiskers or nosehairs :) I also pair it with my Victorinox Compact SAK, so scissors aren't an issue anyway.
The only other thing it was missing was a mini eyeglass screwdriver, however I remedied that by filing down the small flathead. I hadn't been finding any real use for it, so I figured I may as well see if I could file it down to that size, and I was able to do so. Yes, the Compact SAK does have this as well, but now if I happen to only be equipped with my Rebar, I will have an eyeglass screwdriver available (I don't wear glasses, but my wife does, and I do wear sunglasses, so it could come in handy).
-
A late comer into the fray...
Visited a local sporting goods shop (that used to have a serious mark-up on items) and found this Rebar staring up at me - and at $48. Grabbed it. The gal let me look it over and I swapped it for the one on display cause the rivets looked they were stamped better.

Found a CRKT Eat N' Tool so grabbed one of them just cause it was there. Just under $5.
Was actually looking for a walking stick, which I did find at another store. Strange how I find things I want when going shopping for others.

-
Well, i got a few Sears gift card for Christmas, and saw the Rebar while browsing today.
First impressions are so so, but keep in mind this is coming from someone who is a die-hard Vic fan.
I typically have not gotten along well with Leatherman tools primarily because all of the tools are nail-breakers to open. I have experienced this on Waves, Blasts, Kicks, Fuses, Charges, etc. I was kind of expecting this on the Rebar, but was somewhat surprised. The clumping is still there, but out of the box, I can get all tools open with minimal effort.
I really appreciate some of the subtle design choices that make it apparent that LM is applying what they've learned the last several decades making multis. For instance, I like the rounded edges when using the pliers, the replaceable cutters, the oversize nail nicks for the blades, the little bump on the back of the 2 blades tang that helps them close. I like the slim size compared with the blast as well as the slightly shorter size when compared with the spirit.
When I compare it to my multi standard, the Spirit, it does better than any LM I've yet tried. It still, however, doesn't feel as though it is playing in the same league. The clumping, the sharp edges near the pliers where the edges aren't rolled, the very thin blade stock, the lack of scissors. I was also disappointed that the file used on the Wave wasn't used on the Rebar. ONe thing I think the spirit could use is a better file. Unfortunately, the rebar's file is IMO equal to, or a little inferior to the spirit.
I personally think, for my multi uses, this LM is the closest they've yet come. I'm just debating on keeping it, wondering if it'll see any use over the spirit.
None of this is meant to bash, just an admittedly biased comparison.
-
@gustophersmob said:
the lack of scissors. I was also disappointed that the file used on the Wave wasn't used on the Rebar. ONe thing I think the spirit could use is a better file. Unfortunately, the rebar's file is IMO equal to, or a little inferior to the spirit.I love my Rebar, but I agree with these two points. I pair it with a SAK that has scissors, so that's covered. I do wish it had the diamond coated file like the Charge and Wave does, and I feel the same about the Spirit as well (I also own one of these and love it too).
-
Not sure why Leatherman doesn't make scissors that fit into the large bit driver. They could probably sell it for $3.50 easy. And it could fit into the Removable Bit Driver for square phillips headed tools. That would cover the Rebar, Juice and other multitools and give everyone that odd accessory that they'd have to purchase.
The non-diamond dusted file just about made me not purchase the Rebar. Not sure why Leatherman wanted to bypass a diamond-dust coated file, as the Rebar could have cornered the market with that one implement.
The pliers handle rivets looked a bit cheesier. The one I looked at ended getting swapped for the demo cause of one rivet looking half-stamped. Don't want to be sending a new tool back in for repair due to poor riveting.
Am happier with the redesigned awl with threadloop. The hole is a tad thinner, yet is elongated, so should be better for sewing & field stitching. With many carrying items with survival parachute cord it looks like field threading shouldn't be a problem. ~ I bought a walking stick and put paracord on the handle and mid-section for possible survival needs.
Now if Leatherman would only get such an awl over to a Charge series in the next decade...
-
One question, is it normal for the rebar tools to have up and down play when deployed and locked? The ones on the philips side of the tool have play, with the philips driver having the most play.
-
Yeah mine has slight play in the lockup. So does my surge though my wave is a tight fit and has no play in the tool lockup.
-
@Xelkos said:
The non-diamond dusted file just about made me not purchase the Rebar. Not sure why Leatherman wanted to bypass a diamond-dust coated file, as the Rebar could have cornered the market with that one implement.Now if Leatherman would only get such an awl over to a Charge series in the next decade...

Yeah I don't understand why the company would choose not to use the diamond dusted file as it's very useful.
I actually filed down the large fixed flathead on my Charge TTi to a makeshift awl. It's not the best, but it's better than having the flathead when I have one on the bit driver already. -
Soon to be owner. I just came across this on amazon and pulled the trigger. Any idea what the description means when it says "Peg"? Is it talking about the sheath?
-
That is what love about leatherman. $38 for a BO rebar shipped! Try together a spirit for that price.
-
That is what love about leatherman. $38 for a BO rebar shipped! Try together a spirit for that price.
Can you find a Leatherman Charge for that price ?
Apples and oranges ... ;)
That is true. The quality of my rebar is much better than that of my spirits.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
Sorry, I don't know what PEG means though
they go for more than $100 here