And so it begins.... (My adventures into Alox!)
-
I was just finishing up this sailor custom and since people seemed interested in assembly pics I tools a bunch during the test fit up.
This is typically how I build them. Lay the parts out from back to front and then assemble as I go. There are actually 38 separate parts in this mod, each and every single one has had work done to it, not one stock part in the lot. From tool pivot drilling, edge buffing, part reshaping, screw polishing, pivot cutting, drill and counter sinking scales and custom washer making.










-
I really love these pictorial posts. It's like watching an episode of "How It's Made".
-
And here are the finished glamor shots. :D
For whatever reason its always hard to photograph the backsprings, I moved the SAK all over and finally a wood background was acceptable.








-
Nice. Are your pivots one solid length or two smaller pieces joined together?
-
@Corso said:
Nice. Are your pivots one solid length or two smaller pieces joined together?For this one since it's wider than a standard pivot is long, I make the pivots longer by using a very long screw on one side that goes through a short piece of pivot, and then into the longer piece of pivot. I sand down the junction and also put it in the center of the largest spring, in this case the pliers.
-
That's a huge beast. :tool:
-
Great stuff Syph. To be proud of

Small question: is 4 layer alox same thickness as 3 layer celidor?
-
Very nice job!! JR
-
Heeeyyyyy Sexy layday!
Nice!
-
what's the trick to straightening the electricians blade again?
thanks.
-
@WiSAKfan said:
what's the trick to straightening the electricians blade again?thanks.
I clamp it in a padded bench vice, then gentle but firm tap with a mallet. SAK parts bend much easier than it would seem. Ive accidently hit too hard and put a good 45 degree bend in one. Now I just tap a bit, test fit the part, and repeat until it's a perfect fit.
-
I was pretty excited to see a package from Jeff Forbush in the mail today... because I knew it was my scales!
Safety orange cerakote. The man does great work and I can see why he comes highly recommended.
I put some stock orange and black Vics in the pic for comparison. These are going to look awesome with hard anodized black liners.





-
Wow. :o
You know, I'm considering changing up my EDC to a pair of pliers and just a single Alox SAK.
I just love the way they handle.
-
very nice!! :D
-
They have some potential

-
That's impressive!
Are they all from models you've broken down or are you getting hold of scales separate? I've had a bit of a skim through the thread but there's a lot of posts to go through! :D
-

Can't wait to see what they become ;) -
@Stew said:
That's impressive!Are they all from models you've broken down or are you getting hold of scales separate? I've had a bit of a skim through the thread but there's a lot of posts to go through! :D
Lately Ive been doing everything in sets of 10s.. so I buy 10 pioneers, rip them apart, coat scales and move to next color. Ive got 30 more I haven't ripped apart yet, but I ran out of red and black scales which are by far the most popular, so I think i'll do 15 sets each of those. Alot of people have asked either for the black scales with red liners, or red liners with black scales.
-
Nice!
Have you ever showed pics of all your parts in boxes - you must be well organised. :D
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login