Scissor test
-
Adding the Juice S2 Scissor test...
Fair disclaimer: This tool is used. I don't know how used, but it's looks to be in good shape. But, just so we're clear, it wasn't NIB.
Failed: Heavy Plastic
Barely Adequate: Corrugated Cardboard, Khaki, 550
Pass: Non-Corrugated Cardboard, Leather, PETE, T-Shirt
Pass with Distinction: PaperIf I use this tool left-handed, then it fairs much worse, Failing Leather and 550 and barely adequate for T-Shirt.
Final score:
Right-Handed: 5
Left-handed: 2This is the only tool I've seen this kind of major difference in from right to left hand. Very odd.
-
@Lynn LeFey said:
This is the only tool I've seen this kind of major difference in from right to left hand. Very odd.Sounds like the pivot is loose.
When you press down on the "lever," you usually also press a bit sideways. Most scissors are built for righties, who tend to press leftwards; that in turn levers the edge against the other edge, which makes for a more efficient cut. Lefthanded, though, you tend to press it rightward, which levers the edge away from the other edge, causing the scissors to bind up rather than cut cleanly.
-
@Mercury said:
Unfortunately, I must agree with Leatherman's consistency. While they have awesome designs, I have had several tools with terrible scissors on them, while others have the same model scissors and they rock.The scissors on the S.A.N prove to be useless after a few cuts,I dont get it? ??? ???
-JS
-
Unfortunately, I must agree with Leatherman's consistency. While they have awesome designs, I have had several tools with terrible scissors on them, while others have the same model scissors and they rock.
The scissors on the S.A.N prove to be useless after a few cuts,I dont get it? ??? ???
-JS
Are you talking about Swiss Army Knives?
If so, I disagree, I have had a ton of SAK's and NONE of them had any scissor issues. In fact, SAK scissors tend to be the best ones around.
-
Another pair of scissors enter the fray.
Scissor test on the Victorinox Spirit X (brand new out of the box)
Failed: Nothing
Barely Adequate: Heavy Plastic, Corrugated Cardboard
Pass: Non-corrugated Cardboard, Paper
Pass with Distinction: Khaki, 550, Leather, PETE, T-Shirt
I got a 'push cut', meaning I was able to push the scissors through the material without having to work the jaws, on PETE, Leather, and T-Shirt. These scissors were also able to cut through their chosen material even at the very tips of the scissor blades. I think both of these features are due to the curved angle on the scissor blades, making it so the angle of cut is about the same, whether at the back or front of the scissor. These might also have been the best scissors versus 550 I've ever tested.
On a slightly ironic note, their short blades make them only average at common tasks like cutting paper. This shows a bit of a flaw I've already mentioned in my test scoring. While they will cut right through Corrugated cardboard and heavy plastic, the higher force required starts to speak to the tool's lack of leverage, and problems in ergonomics in dealing with heavy material. That's just a function that you will see in all fold-out scissors, IMO.
These scissors are dead on-par with my Wave's numerically, but they really should get special consideration for the awesome push-cut ability demonstrated.
Final Score: +12
-
My test on the scissors for the Multitool that comes with Gerber Bear Grylls Ultimate Survival Pack... Are we calling it the Bear Grylls Strata? Anyway...
Failed: Nothing
Barely Adequate: Heavy Plastic, corrugated cardboard
Pass:550, Leather, PETE, non- corrugated cardboard
Pass With Distinction: Khaki, T-shirt, paperTotal Score: 10
Generally a good pair of scissors, which I expect from Gerber, but the small thumb stud used to press the scissors closed makes cutting heavy material painful. I was also a little surprised at how bad it was at cutting 550, considering how well it did with even multiple layers of khaki.
-
cheers for the tests Lynn.

-
C'mon... you guys just KNOW as soon as a new tool falls into my hands, I'm gonna want to test the scissors and can opener. Well... it's Friday, and we're having dinner over at our friend's house, so no can opening today (but I WILL be testing the cap lifter later :D)
Anyway, the Wenger EVO S17 has scissors, and this is how I rate them...
Failed nothing.
Barely adequate on Heavy Plastic and Corrugated Cardboard
Pass with distinction on T-Shirt, Suede Leather, Cardboard, and PETE
Pass everything else.+11
Very good scissors overall. Cutting heavy material like corrugated cardboard and heavy plastic was a bit painful, and the 550 was a lot harder to cut with this than I thought it should be, but otherwise no problems.
And to make it easier for comparison, here's what the totals look like to date, in order of worst to best. In the event of ties, there's no sorting. Anything ranked +12 tested just as well as anything else ranked +12.
Sheffield swiss army rip-off -3
SOG Powerlock +0
Sheffield 12010 +1
Vic Classic +5
Juice S2 (used) +5
Wingman +6
Vic 91mm Scissors (used) +7
Crosscut (used) +8
Squirt S4 +10
Wenger 85mm +11
Wave +12
MP400 +12
Crosscut 2.0 +12
Spirit X +12I'll add more as new tools come across my plate.
-
They should at least get another point for being self sharpening. They'll never go dull.

-
I'm not exactly sure how I missed this review earlier. I have 2 Micras, and have never tested them. In addition to them, I retested the SOG Crosscut I have against them, to get a very close comparison. One of the Micras is used, and one is more-or-less new.
While the cutting performance on the new Micra actually (to my surprise) beat the Crosscut, I pinched myself twice on the handles of the Micras. No knocks on points for cutting, but not awesome. I must now grudgingly admit that Micra is the best scissors in the land.
Neither failed anything.
Old Micra is barely adequate for T-Shirt, Khaki, Suede, 550
New Micra passed with distinction on T-Shirt, 550
Both passed with distinction with Paper, PETE, Cardboard, Heavy PlasticFinal Scores
Old: +9
New: +15So the rankings of all tested scissors to date stand as follows...
Sheffield swiss army rip-off -3
SOG Powerlock +0
Sheffield 12010 +1
Vic Classic +5
Juice S2 (used) +5
Wingman +6
Vic 91mm Scissors (used) +7
Crosscut (used) +8
Micra (used) +9
Squirt S4 +10
Wenger 85mm +11
Wave +12
MP400 +12
Crosscut 2.0 +12
Spirit X +12
Micra (new) +15 -
I keep telling people here how great micra scissors are but they never listen...
As said, they get a bit worst with age. My usa stamped ones,older, need to be tightened.
-
@dks said:
I keep telling people here how great micra scissors are but they never listen...I've known the Micra scissors were good for quite some time, however, I carried a Crosscut for a very long time. At one point, I lost them, and the only tool available for me to replace them with was a Micra. I then carried it for a few months until I found the Crosscut again. I tested them side-by-side, and the Crosscut was decidedly better. That was 12 or so years ago.
Fast forward to yesterday, when I have the new Crosscut 2.0 and a new Micra. This time, Micra wins, pretty handily. The thing is, I've had 5 Micras in my life, and they were ALL really good. I've had 2 Crosscuts; the old, which was outstanding, and the new... which is less outstanding. It might be this specific tool, or the entire line, but every Micra I've owned has been consistent.
-
My Micra is old poor thing, perhaps it's time for me to get a shiny new one to compare! :D
I'm enjoying your reviews on the subject a lot

-
@nuphoria said:
I'm enjoying your reviews on the subject a lot
Thank you. In truth, scissors are the tool I use most on any MT. I >REALLY< care about how good my scissors are. It's a major factor in my tool selections I intend to EDC. I wish I had a more scientific way of testing, other than my 'sucked/kinda sucked/didn't suck/kicked @$$' method... which is more than a little subjective. I would also feel better (like it was more scientific, less subjective) if I had multiples of each to test, as points have been raised, most notably about Leatherman QC issues. But, I do what I can.
I hope to have a brand new Vic 91mm with scissors to test some time in the near future. That's one of the scissors I really want to get fair rankings for.
-
Oh, scissors are the top tool for me too, without a doubt.
I love the 91mm ones and use them as my first choice

-
Today, a head-to-head of two tools I've owned for a while, and never thought to test.
The Victorinox 58mm (Rambler, in like-new condition) versus the Leatherman Style PS (also in like-new condition). I'm not going to draw out any suspense. They were as close to identical as I could possibly imagine.
Failed: nothing
Barely Adequate: Heavy Plastic and Corrugated Cardboard.
Passed with Distinction: Khaki, Suede, and 550 Paracord.Final scores for both: +10
The size of both of these little fold-out scissors made cutting heavy material very painful. However, in both instances, I was really shocked how well they cut through thicker soft material, like the khaki and particularly the 550, each of which snipped through with one cut.
The quality on both tools shows clearly when compared with the same size scissors on the Sheffield 12010.
The Style PS has the same scissors as on the Squirt PS4, for the record.
So the rankings of all tested scissors to date stand as follows...
Sheffield swiss army rip-off -3
SOG Powerlock +0
Sheffield 12010 +1
Vic 58mm (Classic, used) +5
Juice S2 (used) +5
Wingman +6
Vic 91mm Scissors (used) +7
Crosscut (used) +8
Micra (used) +9
Squirt S4 +10
Vic 58mm (Rambler, new) +10
Leatherman Style PS +10
Wenger 85mm +11
Wave +12
MP400 +12
Crosscut 2.0 +12
Spirit X +12
Micra (new) +15 -
I EDC a Leatherman Style PS and I do use the scissors from time to time and they have not let me down. I originally had the Style CS but found I needed pliers more than scissors as a primary implement.
-
I got the Style PS for a trip I was taking over Christmas, where I knew the TSA would be eyeballing my MT. It went through without issue. I only needed the pliers once, and probably could have gotten by without them, but the scissors were used frequently, and I was pleasantly surprised with their cutting ability.
-
This time, I'm taking a look at a budget tool, the little MT from the Sheffield 2 Piece Mini Multi Tool Set, listed as #12707S
I'll just list it as Sheffield 12707 below in the compiled rankings.
The scissors' blade length and back spring are similar in style to the 85mm Wenger, but with a much shorter lever handle, and with some fatal flaws I'll cover below.
Out of the package, these things were pretty good cutting right-handed, and terrible left-handed.
Right handed:
Failed Nothing
Barely Adequate for Corrugated cardboard and heavy plastic.
Passed with distinction on T-Shirt
Score: +8Left Handed:
Failed PAPER!!!, T-Shirt
Barely Adequate on Corrugated Cardbaord, Khaki, Suede heavy Plastic
Passed all others.
Score: +1The bad performance left-handed is, of course, due to lose pivots. Unlike Wenger and Leatherman Juice series, which use the same style of spring bar as these, they didn't bevel the edges of the tools where the scissor handle meets the spring. That feature on the Leatherman and Wengers forces the blades together, even for a left-handed user. So, I took a metal file to the tool, and did the bevelling.
The results were that they improved slightly for left-hand use, and were now barely adequate for T-shirt and passed Suede, bumping the score from +1 up to +3
I will list the numbers as out-of-package below, however.
For a right-handed user, I would call these scissors shockingly good for the price of the tool. For me, though... :(
So the rankings of all tested scissors to date stand as follows...
Sheffield swiss army rip-off -3
SOG Powerlock +0
Sheffield 12010 +1
Sheffield 12707 (left handed) +1
Vic 58mm (Classic, used) +5
Juice S2 (used) +5
Wingman +6
Vic 91mm Scissors (used) +7
Crosscut (used) +8
Sheffield 12707 (right handed) +8
Micra (used) +9
Squirt S4 +10
Vic 58mm (Rambler, new) +10
Leatherman Style PS +10
Wenger 85mm +11
Wave +12
MP400 +12
Crosscut 2.0 +12
Spirit X +12
Micra (new) +15
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
:D :D :D