What did you use your Leatherman for today?
-
@henryhcyap said:
Seems quite a lot of electrical tasks are being done with Leatherman mts, maybe it's time for Leatherman to come up with an insulated mt with the usual tools but with a test pen incorporated as well.
+1

-
Used the "hook sharpener" groove on the diamond file in my new PST II to sharpen the straight pin from my Vic Compact. That's a handy feature for the diamond coated side of the file. I'm surprised and curious as to why that hasn't been carried over to any of the modern Leathermans.

-
@Monrogue said:
Used the "hook sharpener" groove on the diamond file in my new PST II to sharpen the straight pin from my Vic Compact. That's a handy feature for the diamond coated side of the file. I'm surprised and curious as to why that hasn't been carried over to any of the modern Leathermans.
I agree - love the file and the groove. Wish it was an easy one to throw in other mods.
-
Used the phillips screwdriver on my Juice to screw in some steel boot cleats for walking on ice. Wish I'd used my Charge, with the tool-lock instead. It slipped, and dammit, I broke a nail. >:(
-
Used my Black Oxide Leatherman Rebar to hang and mount all the hardware for a 150lb mirror. Worked like a champ.
-
Took a fan head off of an industrial pedestal fan. I'll start testing an whole family of them tomorrow. The Surge was great to hold the nut, while I used The Right Tool for the Job to turn the bolt on the opposite side. ;)

-
Used the "hook sharpener" groove on the diamond file in my new PST II to sharpen the straight pin from my Vic Compact. That's a handy feature for the diamond coated side of the file. I'm surprised and curious as to why that hasn't been carried over to any of the modern Leathermans.

I agree - love the file and the groove. Wish it was an easy one to throw in other mods.
I don't get why Leatherman hasn't utilized this version of the file in anything else. Which leads to another question of why the diamond file isn't a standard for files on every Leatherman (or Swisstools for that matter) that has a file. Mainly talking about the Rebar as I don't see a point to having both sides of the file set up like that and no diamond side at all.
-
I got to use the bit driver on my Skeletool CX to install a few Cisco switches into an old bolt style equipment rack. The Skeletool worked much better than expected. The bit fit perfectly, and the body of the Skeletool was actually pretty easy to rotate in my hand.
The blade gets used every day for odd jobs.
--
sent via carrier pigeon from my secret hideout -
@Monrogue said:
I don't get why Leatherman hasn't utilized this version of the file in anything else. Which leads to another question of why the diamond file isn't a standard for files on every Leatherman (or Swisstools for that matter) that has a file. Mainly talking about the Rebar as I don't see a point to having both sides of the file set up like that and no diamond side at all.That wouldn't make each tool unique and we wouldn't have to buy multiple tools
Also, isn't that what modding is all about? 
-
I don't get why Leatherman hasn't utilized this version of the file in anything else. Which leads to another question of why the diamond file isn't a standard for files on every Leatherman (or Swisstools for that matter) that has a file. Mainly talking about the Rebar as I don't see a point to having both sides of the file set up like that and no diamond side at all.
That wouldn't make each tool unique and we wouldn't have to buy multiple tools
Also, isn't that what modding is all about? 
Oh yes, very true. The big multitool conspiracy to keep us from being 100% satisfied with a particular model so that we buy others. Sometimes I forget about that, thanks for reminding me :D
Well I'm not a modder, so that doesn't do me any good. Although I am interested in learning how at some point.
-
I don't get why Leatherman hasn't utilized this version of the file in anything else. Which leads to another question of why the diamond file isn't a standard for files on every Leatherman (or Swisstools for that matter) that has a file. Mainly talking about the Rebar as I don't see a point to having both sides of the file set up like that and no diamond side at all.
That wouldn't make each tool unique and we wouldn't have to buy multiple tools
Also, isn't that what modding is all about? 
Oh yes, very true. The big multitool conspiracy to keep us from being 100% satisfied with a particular model so that we buy others. Sometimes I forget about that, thanks for reminding me :D
Well I'm not a modder, so that doesn't do me any good. Although I am interested in learning how at some point.
Also true with women as far as I know. As the saying goes, there are four important qualities when seeking a mate: First, you want a woman who likes to have lots of sex. Second, you want a woman who is a good mother and housekeeper. Third, you want a woman who has a great career and makes lots of money. And fourth, it is critically important that these three women never meet each other. :D
Bottom line: don't try to find the one perfect multitool; do combos instead. Spirit S + LM Micra, LM Charge ALX and SAK with scissors, etc... You get what you want, and the tools won't mind. (well, most of the times at least... there are rumours of grumpy tools that have bitten their owners when they lost exclusivity of pocket time... ::)) :D
-
I don't get why Leatherman hasn't utilized this version of the file in anything else. Which leads to another question of why the diamond file isn't a standard for files on every Leatherman (or Swisstools for that matter) that has a file. Mainly talking about the Rebar as I don't see a point to having both sides of the file set up like that and no diamond side at all.
That wouldn't make each tool unique and we wouldn't have to buy multiple tools
Also, isn't that what modding is all about? 
Oh yes, very true. The big multitool conspiracy to keep us from being 100% satisfied with a particular model so that we buy others. Sometimes I forget about that, thanks for reminding me :D
Well I'm not a modder, so that doesn't do me any good. Although I am interested in learning how at some point.
Also true with women as far as I know. As the saying goes, there are four important qualities when seeking a mate: First, you want a woman who likes to have lots of sex. Second, you want a woman who is a good mother and housekeeper. Third, you want a woman who has a great career and makes lots of money. And fourth, it is critically important that these three women never meet each other. :D
Bottom line: don't try to find the one perfect multitool; do combos instead. Spirit S + LM Micra, LM Charge ALX and SAK with scissors, etc... You get what you want, and the tools won't mind. (well, most of the times at least... there are rumours of grumpy tools that have bitten their owners when they lost exclusivity of pocket time... ::)) :D
Yeah, that's what I do. I usually carry a full size multitool with a SAK. I just really like the diamond file on the PST II. It just seems like the best one IMO, and it would be nice to have it on other multitools. I liked your women joke

-
Essentially, you may need 4 women ;)
(and dozens of multitools :D)
-
Essentially, you may need 4 women ;)
(and dozens of multitools :D)
What does the 4th one do ?

A P.A to make sure your diary works with all those women.... my mother used to have a job like that actually

-
Just got to try the PST II scissors for the first time. Used them to cut some archive box number labels here at work. They worked great

-
I just used the bit driver on my wave to adjust my work truck mirror. Had to use a torx bit, so I'm happy to say my extra bits came in handy!
Sent from my SCH-I535 using Tapatalk 2
-
Been messing with some paracord... TTi scissors and pliers came in handy.
-
Used the PST II's pliers to try to loosen a stubborn Brita water filter from a faucet here at work. I say try because I had forgotten that the "righty tighty-lefty loosey" rule doesn't apply to plumbing. Everyone who tried before me didn't realize that at all as my wife (she works here as well, but in a different building :)) thought to ask me since she knew I'd have pliers on me (haha, another instance to remind her of why I carry them :D). Well, if they had thought to try the other direction, it would have come right off. Of course I scratched the twist off part all up and tightened it even more before realizing plumbing works the opposite way.
-
The knob on the oven in our stove broke a few days ago, and while it will turn the thing on and set a temp, it won't turn it off again.
Been carrying my S2 just for turning the oven off. (I do the vast majority of cooking for our family; I worked as a prep-cook and line-cook all throughout my teenage years and early 20's, before I started college.)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login