What did you use your Leatherman for today?
-
Worked on a fan with my Surge yesterday. I took lots of pix, so I'm putting it in a new thread.
Edited to add link > </topic/42190
-
Used the PST II's scissors to trim a stray whisker. I don't have a SAK with scissors on me today (carrying the Alox P-Rancher) Bugs me that the Alox models have no scissors
but I still love my P-Rancher. It just feels like one of those SAKs that will last my lifetime, and probably beyond 
-
A Charge with Surge scissors would be nearly the perfect multi-tool. I guess if there were only one perfect multi-tool, Leatherman would only sell that one, and make less money.
-
@Landrew said:
A Charge with Surge scissors would be nearly the perfect multi-tool. I guess if there were only one perfect multi-tool, Leatherman would only sell that one, and make less money.Yes I agree. I would like scissors on the outside, in place of the saw I would say as that's the one implement I really don't use on my Charges. In most practical situations (that I know of) where I may possibly need a saw, I will have one on me. That doesn't mean there aren't cases where the saw on the multitool would be handy and useful. For my uses though, the saw is the expendable tool in that line up. Also, replace the fixed large flathead with an awl and voila :o The perfect-ish multitool

Like you said though, if such a thing existed, then there wouldn't be much of a business, nor would it be much fun for us "addicts" ;)
-
I wouldn't part with the saw on my Charge. It came in handy on a trek in the forest, when I spied upon the perfect wood for a walking stick; a dry-cured black spruce sapling with the perfect curve for a handle. If I hadn't had the Charge saw, I couldn't have cut through such a wood of legendary strength. The Spruce Goose wasn't made out of mahogany, after all...
-
@Landrew said:
I wouldn't part with the saw on my Charge. It came in handy on a trek in the forest, when I spied upon the perfect wood for a walking stick; a dry-cured black spruce sapling with the perfect curve for a handle. If I hadn't had the Charge saw, I couldn't have cut through such a wood of legendary strength. The Spruce Goose wasn't made out of mahogany, after all...So would you part with the file instead, or the serrated blade? Just curious. It's interesting to hear different ideas and uses we all have :) If I were hiking in the woods or anything of that nature, I would also be carrying my Colombian sawback machete. In most other everyday situations, I don't need a saw on me, but I know that there could be a situation where a saw could unexpectedly come in handy.
-
I wouldn't part with the saw on my Charge. It came in handy on a trek in the forest, when I spied upon the perfect wood for a walking stick; a dry-cured black spruce sapling with the perfect curve for a handle. If I hadn't had the Charge saw, I couldn't have cut through such a wood of legendary strength. The Spruce Goose wasn't made out of mahogany, after all...
So would you part with the file instead, or the serrated blade? Just curious. It's interesting to hear different ideas and uses we all have :) If I were hiking in the woods or anything of that nature, I would also be carrying my Colombian sawback machete. In most other everyday situations, I don't need a saw on me, but I know that there could be a situation where a saw could unexpectedly come in handy.
Good question. If I chose my multitool based only on what I expect, I wouldn't be as well-prepared for the unexpected. The need for a saw at that moment was unexpected, but much appreciated. Today, I had a crusty baguette for lunch, and the only thing I could cut it with was the serrated blade on my Charge. I also hope to have it handy if I am ever trapped by my seatbelt in a drowning or burning wreck.
I try to cover off all possibilities by carrying both the Juice and the Charge. The scissors on the Juice are superior, it's handier to access, and the pliers are smaller for delicate work. For bigger tasks, I prefer the locking blades of the Charge.
I suppose if I had to give something up on the Charge, it would be the <u>file</u>, as I have one on the Juice, which is smaller, but with a file, size doesn't matter as much. And I can't think of an urgent need for a file; it's usually for a minor fix of some kind.
-
I wouldn't part with the saw on my Charge. It came in handy on a trek in the forest, when I spied upon the perfect wood for a walking stick; a dry-cured black spruce sapling with the perfect curve for a handle. If I hadn't had the Charge saw, I couldn't have cut through such a wood of legendary strength. The Spruce Goose wasn't made out of mahogany, after all...
So would you part with the file instead, or the serrated blade? Just curious. It's interesting to hear different ideas and uses we all have :) If I were hiking in the woods or anything of that nature, I would also be carrying my Colombian sawback machete. In most other everyday situations, I don't need a saw on me, but I know that there could be a situation where a saw could unexpectedly come in handy.
Good question. If I chose my multitool based only on what I expect, I wouldn't be as well-prepared for the unexpected. The need for a saw at that moment was unexpected, but much appreciated. Today, I had a crusty baguette for lunch, and the only thing I could cut it with was the serrated blade on my Charge. I also hope to have it handy if I am ever trapped by my seatbelt in a drowning or burning wreck.
I try to cover off all possibilities by carrying both the Juice and the Charge. The scissors on the Juice are superior, it's handier to access, and the pliers are smaller for delicate work. For bigger tasks, I prefer the locking blades of the Charge.
I suppose if I had to give something up on the Charge, it would be the <u>file</u>, as I have one on the Juice, which is smaller, but with a file, size doesn't matter as much. And I can't think of an urgent need for a file; it's usually for a minor fix of some kind.
I try to do that too, and sometimes it is hard to make a decision
I typically carry a full size multitool and a SAK (or two :D) or the Juice S2. I figure most unexpected situations will be covered that way, same as you. It's easier to just pull out the SAK or Juice to handle most simple everyday tasks, but I like knowing I have stronger, locking tools available if necessary.Good point about the file though. I can't think of any emergency type use for it.
-
I used the PST II scissors to cut up some old raggedy towels into rags. Love that PST :D

-
today I used the Phillips driver in my Original Wave to disconnect the battery of my YXF600R after smoke and a burning smell started coming out from under the tank. :ahhh
I trailered the bike home but haven't been game to take the tank off and look yet.

-
Today so far, I've just used my PST II as a piece to admire
Slow say so far, but it's still early yet. -
Typical abusive day for the poor Surge. Cutting layout template out of cardboard with the knife wasn't bad, but the awl probably didn't like being used to scrape hardened epoxy out of hilti bolt threads, and I bent the heck out of the saw blade trying to cut a keyhole in the base of a temporary plywood wall in order to run a measuring tape through it.
"hey you want a screw gun?"
"by the time you get to the gangbox and back, I'll be done" [/philips head bit kit] -
Used the tip of the PST's can opener to clean under my nails. Actually doesn't do a bad job.
-
I used my PST II's phillips and large flathead to assemble a baby bouncer seat and the crib. The crib's bolts were allen's head, but the barrel nuts into which the bolts had to be housed required the flathead to keep them lined up correctly.
While using the phillips on the bouncer seat though, it closed on me a couple times, and without a lot of force either. The handles themselves even opened up some when this would happen. That's the one big downside to non-locking tools and ,unfortunately, why the PST won't get lots of use for screwdriver jobs. It is still good for other things though. It's not a big deal though, as I really didn't plan on using it too much anyway as I don't want to cause any damage or wear on it.
I still love it though :D
-
@Monrogue said:
That's the one big downside to non-locking tools and ,unfortunately, why the PST won't get lots of use for screwdriver jobs.I still love it though :D
If you want to do screwdriver jobs with a PST you could get yourself a LM tool adapter, they made one that works very well with a PST (the original version with two tangs, not the later "Universal tool adapter" with no tangs). Then you can use any std 1/4" hex bits.
-
Thanks for the tip - I was using my surge today and because they were in a fairly tight spot it was difficult to get the plier cutting blades into the cable tie, I ended up using the PE blade to cut off the excess. Nail clippers would have been much better for this task.
So now I have a question, do any MTs come with decent nail clippers ? Preferably plier based, but I will get a knife based tool if I have to.
-
I said this elsewhere, but better for cutting zip ties than a nail-clipper, if you have it, is a side-cutter. Unfortunately, few multi tools that I've seen have a side cutter as an attachment. It would be very handy for someone who cuts zip-ties frequently.

-
That's the one big downside to non-locking tools and ,unfortunately, why the PST won't get lots of use for screwdriver jobs.
I still love it though :D
If you want to do screwdriver jobs with a PST you could get yourself a LM tool adapter, they made one that works very well with a PST (the original version with two tangs, not the later "Universal tool adapter" with no tangs). Then you can use any std 1/4" hex bits.
Thanks for the info
I will have to look into that.Today I used the PST II's knife blade to cut up a bunch of cardboard left over from the baby crib and bouncer seat I assembled yesterday. It was very sharp and worked very well, even on the tip of my thumb :-[
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login