The Splash - LM Squirt Mod
-
That is superb! Teeny weeny baby Skinth :D
-
I'd be interested in a skinth that color for my Climber if you have any
:) -
I'd be interested in a skinth that color for my Climber if you have any
:)Order the s-shield :)
Thanks, I'll do that. BTW, I just looked at your selection of Skinths and its amazing. These are the most awesome sheaths I've ever seen. GREAT work!

-
The pivots came in today. Good thing I bough extra, I already botched one. The threads are so small that I torqued one of the button heads off. No matter.
The 1/2" long pivots were too short, to make up the extra length, I took two pivots an cut them to length, the spliced them. This have me a .68" long pivot. I then turned them on the lathe with some 400 grit to get them nice and smooth.
I am still missing the S4 nail file and I may take out the other file all together and try to make a toothpick/pin/poker thing to slide into another one of the tweezer slot layers. I also stole the scales off another torx pinned ps4
In any case, here are some pics! It's a nice little square block of steel, plastic and aluminum.




The second file is in there as a place holder till the S4's come in, as mentioned the file may come out in favor of another tweezer layer.



I am really digging the extra width for the knife and scissors usage.


The plier grip is pretty good too.


On other design notes, I think I may design some new scales to print in stainless steel. Include some ruler indentations, maybe 1/4" bit hex hole.
-
Nice! It looks like a big full size tool, then when you have it in your hand you can really see the scale.
-
The extra width seems worth it in this case. The ratio of tools to bulk definitely increases for the better.
-
You got a good bit of tool in that one Eric
Looks great 
-
Ok, I think I have a problem. I can't seem to stop doing work on this tiny tool. I made another SE, this time with a much less aggressive pattern. I first made the curves with the large stone bit, the made the small scallops with a diamond bit. The I angled the same diamond big and profiled the large scallops. Finished off with an over all 400 grit sanding followed by a backside sharpening on an overturned belt sander. I'll install it when the nail file gets here to minimize the disassembly and reassembly time.




-
I like the less aggressive scalloping myself though I'm not a SE user.
-
Much better serrations mate
Nice to see the size perspective in hand too 
This project is rapidly going from a "Metro's been drinking the paint thinners" idea, to a "now, why didn't LM do that" idea :D :D :D
Great job mate

-
@50ft-trad said:
Much better serrations mate
Nice to see the size perspective in hand too 
This project is rapidly going from a "Metro's been drinking the paint thinners" idea, to a "now, why didn't LM do that" idea :D :D :D
Great job mate

+1 :D
Great job on the second serrated blade. The first one seemed a bit odd for you.

-
Ah there you go, that looks just right. The best serrations Ive used so far are on the swisstool RS rescue cutter. All big scallops and that's what I want to put on my SAK blades for dual bladed SAKs.
-
Yah, couldn't wait.
Double edge madness!!


One more for scale.

-

I've been kicking the SE idea that you had for this. I really do like the scalloping on the second blade you did. Consider this though, is that blade too small for the less aggressive scalloping? I would think that the first one may be more beneficial to the kit as it could be doubled for a saw

-
I've been kicking the SE idea that you had for this. I really do like the scalloping on the second blade you did. Consider this though, is that blade too small for the less aggressive scalloping? I would think that the first one may be more beneficial to the kit as it could be doubled for a saw

Hard to say. I often cut bailing twin and nylon rope so this amount of SE might be good. I could always try another and make the large scallops a little smaller using the 1/2 stone bit to shape it.
-
Great work Metro, as always. As amazing as your work always is, you would think I would stop being surprized but it is always mind blowing to see what you can come up with.
I was skeptical at first that the end result would be too big and heavy without offering any real advantage over stock. I could not have been more wrong (more wrong?
) and now I have Squirt envy (sounds nasty).Anyways, the less aggressive SE blade looks alot better and is probably more effective and safer. That first attempt looks like something out of a horror movie >:D.
Why the two files?
-
Very nice!

Did you put it on a scale? How much does this "beast" weigh? ;)
-
What happened to the ruler scales?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login