And so it begins.... (My adventures into Alox!)
-
I think the Vic phillips would be better. It's more precise than the Wenger which is to thick for most screws, and it would leave you with a gap, cause of it's short size.
-
Is there much of a difference between the Victorinox and Wenger versions of the wrench?

-
There is no Victorinox wrench if I'm not mistaken.
-
@crackout said:
There is no Victorinox wrench if I'm not mistaken.This photo is what confused me in thinking there was a Vic version, as that looks a lot like cellidor with a scale tool on the end. Must of been a modified Vic.

And looking at the image name can see it indeed was a Wenger accessory. Deceiving picture snippets.Edit: Had a connection issue there.
-
So I restocked on alox donors, but the darn things came all stuck together with these rivet things!


But... after about an hour they are much easier to use now. :D

A couple of tips for anyone trying to take apart alox SAKs. Two layer ones you need to drill out all 3 rivets, but solos and anything with a saw layer only 2 rivets. The spring with the open end like on the solo or the saw layer on a farmer just pulls out since its open, then you squeeze the scales together and use side cutters to cut the head of the now exposed rivet. Easy peasy.

Disclaimer: Many SAKs were harmed in the making of this post.
-
Gentlemen, we can rebuild them. We have the anodizing. We have the capability to build the world's finest alox knives. Syph007 will be the man. Better than they were before. Better tools, stronger coatings, faster builds.
-
Today on How It's Made...
-
I'm curious. What do you do with all the stock liners? Do you use them in case nothing custom (brass, aluminum, ti) is desired?
Oh, and a little off-topic: Are the cellidor liners aluminum? If so, which alloy?

-
Yep cellidor liners are Aluminum. Really cheap grade, not sure which. I was thinking to try anodizing some to see how they would turn out to jazz up a 91 SAK. I use stock liners for mods too and for guides to make my custom liners. A stack of 5 stock liners is my router template guide, and they wear out after awhile.
I just got another run of black parts back today and I tried a new experiment.

I made some aluminum keyring/awl spacers and used fine aluminum rod stock to rivet them onto aluminum liners I made. The idea was that since its all aluminum it would all just anodize.
Well it mostly worked. The problem is you can see the liners are glossy looking but the spacer turned out more matte. The liners are 6061 and the other part was 7075 as thats all I could find in the right thickness.
They still might look ok with the orange scales, I'll have to see. I will make an effort to try to find some 6061 now though in the correct thickness for the next attempt with red liners.


-
If I understand correctly, you are making the anodization yourself ?
Would you have a pic of the setup you use ?
-
I will make an effort to try to find some 6061 now though in the correct thickness for the next attempt with red liners.
What thickness do you need for the 6061?
0.040 and I just realized I never checked to see if there was that thickness in the batch you sent me, but I had arleady cut the pieces from 7075 at the time and didnt realize it would anodize differently.
-
Well, I think you may have voided the warranty again ::)
-
@Mimifred said:
If I understand correctly, you are making the anodization yourself ?Would you have a pic of the setup you use ?
Sorry I missed your question. I do not do the anodize myself, I only strip the scales to bare Aluminum. I have a professional do the anodizing part. It's done in an acid medium with refrigeration, not really a home setup I want to do.
-
@Syph007 said:
Yep cellidor liners are Aluminum. Really cheap grade, not sure which. I was thinking to try anodizing some to see how they would turn out to jazz up a 91 SAK. I use stock liners for mods too and for guides to make my custom liners. A stack of 5 stock liners is my router template guide, and they wear out after awhile.I just got another run of black parts back today and I tried a new experiment.

I made some aluminum keyring/awl spacers and used fine aluminum rod stock to rivet them onto aluminum liners I made. The idea was that since its all aluminum it would all just anodize.
Well it mostly worked. The problem is you can see the liners are glossy looking but the spacer turned out more matte. The liners are 6061 and the other part was 7075 as thats all I could find in the right thickness.
They still might look ok with the orange scales, I'll have to see. I will make an effort to try to find some 6061 now though in the correct thickness for the next attempt with red liners.


The difference in material shouldn't have that much of a difference in coating. However if one was polished(liner) and one wasn't (keyring/spacer) that should determine the final color/finish. Try polishing one of the keyring/spacer and liner, then try. Should be really close. I guess I've researched to much lol.
-
It depends on the kind of anodizing one does. If acid cleaning is involved, different alloys will shows drastic differences, especially in shinyness.
-
@crackout said:
It depends on the kind of anodizing one does. If acid cleaning is involved, different alloys will shows drastic differences, especially in shinyness.It must be something like that since I had them both finished exact same way. Sanding up to 800 grit and polished. They looked identical before anodizing. Oh well now I know.
-
I forgot how nice brass and black looks together. This is a modified soldier with brass liner and scissors. Small blade for awl, and no opener layer.




-
Wowee, that is a gorgeous look.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login