'Swiss Army STYLE knife' review
-
It's been two days and I already miss my Wenger. But onward shall I stagger!
-
Oh yeah, we definitely need to hear how this progresses!
Def
-
@Jothra said:
http://i1287.photobucket.com/albums/a634/daikaijujothra/IMG157_zpsdca91d15.jpgI have one very similar to this that kind of just dangles on a lanyard by my key hook in the kitchen. its been there for years, waiting for that "just in case" moment that I need it. Though, I have used it a few times before. one of the most uncomfortable tools Ive used. The scales were loose and pinched me if I gripped it a certain way. Hope you have some better experiences with it than I have.
-
30 Day Coghlan's Army Knife Challenge: Day 3
Back to construction! Today's special: prying shards of tile from under rubber baseboard!

Coghlan the Army Knife after 6' of prying leftover pieces of tile from under baseboard (top), the OH Forester after stupid amounts of prying and scraping over several months (left), and the Ranger after absolutely unholy amounts of abuse over the course of more than a year.I'm not sure to what degree it reflects on the quality of the steel, but the screwdriver sure scratched up in a hurry, though it fared much better than I expected.
After three days, this thing looks pretty terrible.

Further bulletins as events warrant. -
From my experience the ones with fewer layers are better. I have a 3 layer one I got with some energizer batteries and it is OK as a knife. The steel is soft but it cuts.
The rest of the tools (Scissors, screwdrivers etc.) are also soft so they will deform easily. You can screw something but not too tightly. I have had it for years and it is there when I need it.
With the soft blade you can cut anything, damage it and get it sharp quickly.I have a much better looking bigger one that has a lot of tools but has fallen apart, with no use, and none of the tools can be closed now. Overambitious
-
^ This.
You are doing us all a great service, Jothra.
I'm certain it's the problem with soft steel that made the saw on mine go dull so quick. Jothra, I know you're probably a busy guy, but if you get a chance to test the saw, and either replicate or refute my results, I'd appreciate it. No hurry, though.
-
DKS: the pins on the two-layered ones were peened better, as were the ones on the three-layer knives. I only went with the five-layer because it's the closest to my usual toolset (Huntsman, s18, etc).
Lynn: it's definitely only a matter of time before I end up using the saw on both 2x4s and drywall. SAK saws are amazing drywall saws. I suspect Coghlan's isn't.
Nothing but food prep, a can, and personal grooming on day 4. Oh, and origami dinosaurs.
-
Great test! Can't wait to see how the tool holds up.

-
Yes, me too.
I am curious to see what it will happen. :) -
30 Day Coghlan's Army Knife Challenge: Days 5-7
Hooray! I'm at a computer!
Day 5 involved some scraping...

but more notably involved tearing up some particularly ugly carpet!

The main blade could handle the carpet (which had a thick and surprisingly abrasive underlay), but dulled pretty quickly. I know that ideally I should be using some kind of breakaway knife, but the nearest one was probably 45 minutes away. After two sharpenings, I caved and grabbed the Forester from the truck. It handled the whole job without any sharpening at all. I also tested the Evo s18, which kept its edge nicely.

Photos in the dark with a cell phone? You bet!Day 6 was an easy day. Food prep. Toenails. In that order, and not at the same time.
Day 7 gets its own post, because it was a game changer.
-
Even though nobody knew it, Day 7 is the day some of us have been waiting for.
Today I needed the saw.
It had two jobs: cut out a small rectangle in some drywall, and cut a 3" strip of drywall in half.
The hole in the drywall was easy. Coghlan chewed through it like it was butter. Win!
The strip of plywood, on the other hand, was a gong show. The saw made it less than halfway through before it became too dull to go on.
Here is a side-by-side of a Wenger 85mm saw, left, and the Coghlan's Army Knife saw:

Note the compound angles on the Wenger, which are much more aggressive than the teeth on the Coghlan's. As a result, even before the edges dulled, the Coghlan's saw was not as effective a tool.Even though the saw is no longer any good for wood, it still works okay on drywall. But seriously, it couldn't handle 3 inches of drywall? A serious SAK saw can handle whole 2x4s.
The saw is officially the first tool to completely fail at an EDC task, and the first part of the knife to fail the 30 Day Coghlan's Army Knife Challenge!
-
I'm glad to hear your experience with the saw was the same as mine. It makes me feel a little more confident in my statement about it in the original post.
I also found your writing on blade work interesting. I think a blade going dull is somewhat less problematic than a saw, since you can resharpen a blade. Was resharpening very difficult?
Keep up the excellent real-world test!

-
It's a pity about the saw, since that's usually a dealbreaker for me.
Resharpening the knife was phenomenally easy. So far this is still the only time I've had to sharpen it anyway, so I still consider it a serviceable blade.
Besides, I think it's only fair for me to admit that I abuse my pocket knives far more than any other tools I own.
-
30 Day Coghlan's Army Knife Challenge: Day 8
Today the main blade scraped and pried blotches of long-hardened glue from a wall with no ill effects. I didn't even have to sharpen. The slot screwdriver also made some scraping appearances, but isn't as good as its Swiss cousins (distant, distant cousins...) It's still prying just fine.
More carpet, this time because a piece was preventing the dump trailer's doors from closing. Coghlan handled it.
And now, the hardest job Coghlan has ever performed:

I really didn't want to get locked outside. So problem solved, Coghlan's 11-Function Doorstop Knife. -
omg, where do i get one of these? im sold!

-
I wouldn't be overly shocked if you could find one at your local Dollar Store. I got one of the two I own there. If you can't find one there, try the sporting good section of regular retail stores (which might have the Coghlan version). Or pawn shops, where I got my Sheffield version.
You may have been joking with that request. I can't tell. Partly because i have a SICK fascination with cheap MTs and simply assume everyone actually DOES want to see what's at the bottom of the barrel. :D
-
i was joking mostly. but the MTs i see at my local dollar store are nowhere near this quality that im seeing in this thread. im going to stop by and pick another one up next i am around just to tinker with.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
