The Splash - LM Squirt Mod
-
Best mod ever.
If only Leatherman would make one like this. -
@powernoodle said:
Best mod ever.
If only Leatherman would make one like this.If only. That file is useless. The picker blade/wirestripper is the boss! It's works so well at precision paper cutting.
One more "mod".
Aha! Mzil's pin storage activated!! In the picker blade slot.



-
-

BO Splash or trick of the light?

Trick. While I would love to BO this, the tools are too much at risk of being broken so would rather have them "user" (me) replaceable. I purposely order bright red for the scale set so it would be easier to find. The Splash is tiny!
-
More mods/reconfigure/usage report.
After using the Splash last night and this morning to cut down boxes and other things, I got to thinking what do to for an hour before I had to go pick up the Mrs.
EYEGLASS DRIVER NAIL NOTCH
I actually had to tighten the screw on my nose pad oddly enough and had trouble deploying the eyeglass driver. Bingo, nail notch.



NEW PIN STORAGE
I added a pin to the Splash morning but I didn't like how it could fall out, I tried with ALL of the slots and crevices but still didn't have the right I kind of hold I wanted. I took a look at the tweezers layer insert. There is JUST enough room for a pin slot to be added...a REALLY light touch with a diamond disc (thinnest one), the insert taped to a table and a channel was opened! I cleaned it up with a small rail tail file. The tension is better than the one on a SAK plus scale.




Oh yah, the layer had to be moved so that the pin and tweezers pulled away from the pliers. Found that out when I had it opening where the Plier heads open and this happened to a pin. Candy cane anyone?


REARRANGING PARTS.
The other load out was more of a...can I do it? Kind of assembly. After using it in the "field" of everyday life, I found that there could be some improvement to the use and ergonomics, not to mention the logistics of where the tools were.

The 1/2 deployment of the handles makes for a very nice handle for a full grip on the detail picker blade (also works for the PE, I may switch the SE and PE positions).



I am going to keep on using this little guy and see what else irks me. Change it and make it truly the ultimate Squirt.
-
That thing is looking great Eric
I was still kind of hoping for the ruler scales but oh well.I'll save it for another mod, when the length is more useful :D
i'm thinking about welding a good ruler to my wave, would the thickness of the wave's chassis be a problem, and how thick would the ruler need to be?
I would sooner shape the ruler to the shape of the handle, then ruff up the mating sides and jb weld it on. Welding may ruin the precision markings.
I haven't known jb weld to be very strong, though it may work in this case... hmmm... i need a ruler
-
I am going to be making another one of these little guys (maybe not as many details) to give away for my one year of Skinth, IF the new 3d printed scales work out.
Stay tuned!!
-
Dibs! :D
-
Could we have this stickied? Plenty of inspring mods for keychain tools, this thread is awesome!
-
@Metropolicity said:
I am going to be making another one of these little guys (maybe not as many details) to give away for my one year of Skinth, IF the new 3d printed scales work out.Stay tuned!!
You're supposed to let me buy it you scoundrel! :ahhh
-
@clickstop said:
Could we have this stickied? Plenty of inspring mods for keychain tools, this thread is awesome!That's up to a mod...:)
@nuphoria said:
You're supposed to let me buy it you scoundrel! :ahhhspeaking of mod......
-
Sticky or not. It'll still be here :)
-
@Metropolicity said:
Sticky or not. It'll still be here :)Absolutely, and it's great stuff

Love you, love your work... mwah mwah

-
nice work man! how did you "splice" the pivots? did you cut the head off of a bolt and thread/loctite two pivots together in the middle?
-
Not going to make this a sticky as it's following one tool and it's not a general "how to" guide :)
-
@EvilOlivE said:
nice work man! how did you "splice" the pivots? did you cut the head off of a bolt and thread/loctite two pivots together in the middle?No, that's would be a waste of a bolt!
I cut a tube in half, the trimmed it flush an to length on my lathe. Then I screwed the bolt all the way through. Then I screwed in another 1/2" tube onto the exposed threads and then spun the whole thing on a lathe again polishing it with a band of 400 grit.
It results in stationary pin and a screw you screw into.
-
@Metropolicity said:
No, that's would be a waste of a bolt!I cut a tube in half, the trimmed it flush an to length on my lathe. Then I screwed the bolt all the way through. Then I screwed in another 1/2" tube onto the exposed threads and then spun the whole thing on a lathe again polishing it with a band of 400 grit.
It results in stationary pin and a screw you screw into.
hmm, would you then have to take the whole pivot out if you wanted to change a tool on the stationary side? i guess its no big deal if you dont plan on changing tools much. i'm not trying to criticize. Either way its very nice work and i enjoyed all the pictures, so thanks for posting.
just curious, what was the final length of your pivot? i remember the 1/"2 pivots worked out prefect for me, but i was using keys that were wider than the tools and the LED was wider than the keys. then i had to space them out even wider to make all the scales flush with each other.
i can go check for myself later, but i'm guessing the 1/2" pivots are long enough if someone wanted to make a 4 layer squirt with just leatherman tools?
-
@EvilOlivE said:
hmm, would you then have to take the whole pivot out if you wanted to change a tool on the stationary side? i guess its no big deal if you dont plan on changing tools much. i'm not trying to criticize. Either way its very nice work and i enjoyed all the pictures, so thanks for posting.just curious, what was the final length of your pivot? i remember the 1/"2 pivots worked out prefect for me, but i was using keys that were wider than the tools and the LED was wider than the keys. then i had to space them out even wider to make all the scales flush with each other.
i can go check for myself later, but i'm guessing the 1/2" pivots are long enough if someone wanted to make a 4 layer squirt with just leatherman tools?
It may need a TINY bit of trimming. I just measured a standard PS4 and it's just under 1/2" to the outside of the scales.
Half of the fun is documenting and sharing. I am a huge fan of doing it yourself and learning. You can pay anyone to do anything, but you are never satisfied until you do it yourself.
-
Damn! Shape ways is estimating me Feb 12 before the stainless steel and plastic ones show up.
I am tempted to just order a set of detail plastic ones and see the fit, they will show up much sooner than the other ones and would cost about $3 per scale plus shipping.
--
On an unrelated note...this project reminded me of a find...behold! The Monster 58...
http://victorinox.saam007.com/monster58.php
--
Also was bored before bed so I swapped out the custom aluminum bead I made for my modded Juice S2 onto the Splash.


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login