And so it begins.... (My adventures into Alox!)
-
I picked up a florist SAK a while back for the sheepsfoot blade. The idea is that I want to make an alox whittler and figured I'd give that blade a try.
PTRSAK already said the pivot hole was larger than normal, and it sure it. Must be somewhere around 3.5mm or a bit bigger even as my 1/8 pivots are too small.
Anyways, so this means it needs a bushing. I took some 1/8 brass rod stock and put it through and beat it until it spread out and filled the gap. No need to peen if you try this, just hit flat and hard as you want to mushroom the pin itself inside the gap. I trimmed the ends off with my jewelers saw and then sanded flush. Now to carefully drill a hole the right size and we're in business.
-
Wow, that looks super clean.
-
very usefull info Robert! i was planning to open my gardener but i have no pins for that, i kwon it now ;)

-
@Syph007 said:
I picked up a florist SAK a while back for the sheepsfoot blade. The idea is that I want to make an alox whittler and figured I'd give that blade a try.PTRSAK already said the pivot hole was larger than normal, and it sure it. Must be somewhere around 3.5mm or a bit bigger even as my 1/8 pivots are too small.
Anyways, so this means it needs a bushing. I took some 1/8 brass rod stock and put it through and beat it until it spread out and filled the gap. No need to peen if you try this, just hit flat and hard as you want to mushroom the pin itself inside the gap. I trimmed the ends off with my jewelers saw and then sanded flush. Now to carefully drill a hole the right size and we're in business.
That is an awesome sheepsfoot blade. Is it possible to still buy them?
-
4 hole alox style would be just fine!
-
The other benefit of the Alox type scales for a 91 is the reduced thickness.
-
-
Here are a couple more new parts I made up last night.
Technician long screw driver from can opener.

And serrated 93mm blade, for a dual bladed SAK with one plain edge and one serrated blade. I did this freehand and it turned out way better than I expected. Sharpened on my sharpmaker and it tears through cardboard, so Im happy with the result!
I have a bunch of solo blades from back in the early days when I bought solos as spring donors to put scissors on. So I think those blades will all turn into serrated blades.


-
That is so awesome!
-
I love the serrated blades!

It would be so nice to get a 2 layer sak with both plain and serrated blades.
-
Brilliant bit of tool repurposing there

-
-
That serrated is NICE!
JR -
Robert, you inspired me. I'll do this to a MyFirst Blade and incorporate it into a super Cadet. >:D
-
@crackout said:
Robert, you inspired me. I'll do this to a MyFirst Blade and incorporate it into a super Cadet. >:DGood use of a myfirst blade too! I have a few of those from buying economy my firsts to get the 84mm saws.
I clamped the blade in a vice then used a diamond drum dremel bit. I tried a small one first but the serrations were too small. I think I could have gone bigger, more swiss tool rescue blade size, but the size I did works fine.

-
Fro what I know a serrated blade is not V-shaped. Did you grind the backside flat first?
-
Nope those are just drum cuts made at about a 20 degree angle from one side only. You will get a big bur on the other side, that I then ground off when my belt sander, the just sharpened it on the sharpmaker. I will clean up the goovs by wet sanding them with a small mandrel and fine grit, then they can be polished.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login