The Splash - LM Squirt Mod
-
30???
There's gotta be a file in there somewhere for me :D
-
Oh my.. did you win a big lot on the bay? I bought a lot of 8 squirts once for mods, but they are still in my get to it someday and make something cool with them pile... :D
I talked to my fave seller on eBay and asked if she has a bunch of broken ones. Bingo, average of $4 each. Since they are coming apart and I have scales designed and can be manufactured as needed, no sense saving them.
Is her name by any chance Doris? :D
-
Oh my.. did you win a big lot on the bay? I bought a lot of 8 squirts once for mods, but they are still in my get to it someday and make something cool with them pile... :D
I talked to my fave seller on eBay and asked if she has a bunch of broken ones. Bingo, average of $4 each. Since they are coming apart and I have scales designed and can be manufactured as needed, no sense saving them.
Is her name by any chance Doris? :D
No, it's Susan.
There's gotta be a file in there somewhere for me :D
There must be! Haha.
@Syph007 said:
Wow nice score for sure then.
Edit: Hey werent you also getting a big box of msc parts from some MT maker who I cant remember at the moment, but what ever happened with that?
Oh, you mean Bushido, it was indeed a score. A bunch of those parts went into my Commander project. It's nice to have a bunch of parts that already torn down..
-
Wow nice score for sure then.

Edit: Hey werent you also getting a big box of msc parts from some MT maker who I cant remember at the moment, but what ever happened with that?
Oh, you mean Bushido, it was indeed a score. A bunch of those parts went into my Commander project. It's nice to have a bunch of parts that already torn down..
I think he means Multitasker.
-
Wow nice score for sure then.

Edit: Hey werent you also getting a big box of msc parts from some MT maker who I cant remember at the moment, but what ever happened with that?
Oh, you mean Bushido, it was indeed a score. A bunch of those parts went into my Commander project. It's nice to have a bunch of parts that already torn down..
I think he means Multitasker.
AH yes...I haven't given that a full look over, it's much more complicated than anything I've worked on.
The back spring system is different and the tools lock in an odd way. I think Shane wants me to do some R&D for him :)
-
Wow nice score for sure then.

Edit: Hey werent you also getting a big box of msc parts from some MT maker who I cant remember at the moment, but what ever happened with that?
Oh, you mean Bushido, it was indeed a score. A bunch of those parts went into my Commander project. It's nice to have a bunch of parts that already torn down..
I think he means Multitasker.
AH yes...I haven't given that a full look over, it's much more complicated than anything I've worked on.
The back spring system is different and the tools lock in an odd way. I think Shane wants me to do some R&D for him :)
Ah yes, the multitasker parts thats what I was thinking of. I figured we'd see some crazy creation out of that box of mystery parts.
-
Update!
Been carrying and using the Splash for a week and it's been a treat! Almost all the tools except the 3d phillips has been used and they all performed the task at hand!
RED UNIVERSAL SCALES FROM SHAPEWAYS INBOUND!
Should be here in a couple of days, test fitting and then the SS order should go through soon after that!
-
Awesome - great to hear it;s actually really useful as well as being cool! :D
-
@Metropolicity said:
Used the Splash today to change out the needle on Betty.
Your pic of Betty reminds me of a fellow builders arcade machine from back when I used to builds arcade machines. He called it bubblegum betty.
-
Red plastic scales are due at my house TODAY. So says UPS tracking and estimated time of arrival.
If these fit...it's full (ahem pardon the pun) scale stainless steel production time!
-
Ok. Take two. UPS is delivering the red scales by tomorrow end of day.
-
HOLY CRUD!
About time...the scales finally came in. A little bit of adjustment later (boring out the pivot holes to 1/8), I reassembled with the same load out. I know what to change now (the scallop is 1mm too deep and the cut out for the scissor needs to move over 1mm) but wowwie the red is nice! The pivot distance is perfect and I am confident enough to go ahead, tune the 3d files and send it off to get the stainless steel done.
Enough chit chat....PICTURES!
Here you can see the scissors nick is a little bit out of alignment

The scallops are a bit too deep, but they are nice!

Here you get a better look at the File Work.


3D Phillips, Flat Driver/Opener/Eyeglass Driver/Tweezer/Flat Pin/PE/SE

Scissors/Combo Blade/Nail File/Awl/2D Phillips

And a couple of Hero shot


Time to tweak the files, then order the Stainless Steel ones....HEX DRIVER!!!
-
A couple more detail shots.
The Thumbgrip/file work

SE spine jimping (not effect, just for identification)

Nail File File work...serpentine

Combo Scalpel/Wire Stripper file work

More Combo and File, in hind sight, I shouldn't of made a spear point so the bump on the right side of the blade shouldn't be there. Three scallops for the wire strippers and a point for the blade :)

And another shot..

-
If you were licensed and able to market these...the multitool world would be forever changed.

-
very nice work, Metro! The Splash looks amazing!

so when you get the stainless scales, are you going to keep the SS look, or get them cerakoted red to match these plastic scales? the red looks pretty sweet!
-
@Breezy12 said:
very nice work, Metro! The Splash looks amazing!
so when you get the stainless scales, are you going to keep the SS look, or get them cerakoted red to match these plastic scales? the red looks pretty sweet!
I don't know. On one hand I want it to be as visible as possible, but I also want it to have some durable finish. The downside to the aluminum scales is that they don't wear nicely or well.
@scorpion008 said:
If you were licensed and able to market these...the multitool world would be forever changed.
There is nothing wrong with selling modded MTs. The Hot Rod industry has been doing it for decades.
-
Very nice work Eric

-
If you were licensed and able to market these...the multitool world would be forever changed.

There is nothing wrong with selling modded MTs. The Hot Rod industry has been doing it for decades.
The only problem really is cost! When you build tools and the parts are from retail tools... costs rise quick! :D But at least you get something unique in the end.

-
@Syph007 said:
The only problem really is cost! When you build tools and the parts are from retail tools... costs rise quick! :D But at least you get something unique in the end.
Not true, the parts that made this tool only cost a total of $38, just barely over retail for a new PS4. I recently bought 30 or so Squirts for about $120, that's $4 per tool. It's the gall to go ahead and take them apart, and risk making mistakes that costs :)
The Squirt is becoming more and more my favorite platform because its so inexpensive and the mechanism are so simple. I am trying to imagine some more hollow layer tools like 2mm lead holders, cocktail forks, flashlights. The advent of Shapeways has changed the way I look at modding tools. I can already see how I can model a spacer and a transparent lens all 3d printed.
What I really want to do is make the parts available to anyone who wants to make their own mods, like a choose your adventure.
-
Absolutely brilliant stuff.... can't wait to see the next set of scales :D
Oh, and about the selling of tools, I'm always here to take them off your hands!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login