Surge Owners Club
-
Well - not according to this:
[or title: SHOT show 2013: Leatherman]
WOW. I wish I had dreamt it. People were using the bit drivers as a pry-bar?!?! Say what????**
Aye carumba...
One can only hope that the video contains now-outdated info. Because that's a fool move if there ever was one. Improve, yes. However, if it's not broken, eh?
-
@Kukamunga said:
Well - not according to this:[or title: SHOT show 2013: Leatherman]
WOW. I wish I had dreamt it. People were using the bit drivers as a pry-bar?!?! **Say what? ??? **
Aye carumba...
One can only hope that the video contains now-outdated info. Because that's a fool move if there ever was one. Improve, yes. However, if it's not broken, eh?
Never underestimate...
Yes, I can believe someone using the eyeglass driver as a prybar. Unfortunately, yes. -
@Landrew said:
Never underestimate...
Yes, I can believe someone using the eyeglass driver as a prybar. Unfortunately, yes.I thank you and bmot, for I now realize what you both are talking about. I watched the vid again and now see WHICH part of the tool JULI is showing; I thought it was the larger bit driver...no matter what you people was sayin'.
Forgive me; if only I were a bit more Holmesian in my dailies.
Still - that makes even less sense; people are actually using that wisp of a driver as a pry tool. Truly WTF. And on that note.
-
@Kukamunga said:
Well - not according to this:[or title: SHOT show 2013: Leatherman]
WOW. I wish I had dreamt it. People were using the bit drivers as a pry-bar?!?! Say what????**
Aye carumba...
One can only hope that the video contains now-outdated info. Because that's a fool move if there ever was one. Improve, yes. However, if it's not broken, eh?
I have to say that I was half expecting them to retire the Surge soon, but the changes they're making make perfect sense. That little bit driver makes sense on the smaller tools but manipulating something that precise with such a big frame always seemed a bit nut and sledge hammer to me.
The t-shank holder amendment is long overdue and adds a ton of utility, but most of all they've turned it into a proper heavy duty tool I reckon. By that I mean that I informally categorise my tools into two groups:
-
Smaller pocketable tools for precision jobs (maybe Wave, Charge, etc) where you have a wide range of utility and options;
-
Bigger, heavy duty tools where you can knock seven shades of smurf out of stuff without worrying about bits snapping or bending Core, ST300 etc.
The Surge always had a few too many things from category 1 in it to be a serious category 2 contender, which is why I've always favoured the Core and then the ST300 for "proper" jobs.
I'm determined not to buy any more tools until I've decided what I'm doing collection wise, but I might be tempted to trade something for a new Surge when they appear and give it another go.
Those folding scissor things looked cool too.
-
-
Glad they didn't dump the eyeglass bit driver from the Charge also. There are few surprises more unwelcome than having your eyeglasses fall apart when you're hiking in the bush. I will hang on to my current Surge with the tiny bit driver, but I wish they would have upgraded something else instead of just putting in a small blade screwdriver; I mean it already has a full set of interchangeable bits, two full sets in fact. I would have rather seen something like a small side-cutter for cutting zip-ties.
-
Well, when I used to frequent this place, I didn't wear glasses, but now I do so I have a new appreciation of that little thing!
I like having it on my Charge, I seemed to find enough uses even when two eyes were sufficient though!
-
New 2013 Surge (scanned & cropped) in the Leatherman catalog.
-
I would like to have the new plier head with the replaceable wire cutters. I've been using the blade exchanger with DeWalt t-shank jig saw blades for years with no problems. I'm not crazy about the change of the small eyeglass screwdrivers for a fixed small screwdriver. I like my small eyeglass screwdriver very much and I use it a lot. I'm not crazy about the changes, I think I will keep my original Surge.
-
Swap out the pliers with st300 jaws. Problem solved!

-
@Multiple Personality said:
I would like to have the new plier head with the replaceable wire cutters. I've been using the blade exchanger with DeWalt t-shank jig saw blades for years with no problems. I'm not crazy about the change of the small eyeglass screwdrivers for a fixed small screwdriver. I like my small eyeglass screwdriver very much and I use it a lot. I'm not crazy about the changes, I think I will keep my original Surge.
Someone told me they removed the mini-screwdriver from the Vic corkscrew plastic twist holder and inserted a Leatherman eyeglass driver into there. If I recall, it was a tight fit & required pliers to swap sides. But you'd need a place to put a twisty if you don't have a Vic.Don't have a spare corkscrew twisty tool to try it with myself.
-
Yeah but I have to buy a ST300 to do that.
-
-
Yeah... I just used the calculator on my phone to add up how much I've spent on my multi tools....
Roughly $700

PST- gift
Super tool- $15 used
Original wave-$65
New wave-$70
Surge-$80
Juice KF4-$75
Juice S2-$45
Sidekick-$30
Sidekick-$30
Wingman$30
Rebar-$50
Supertool300-$65
Sog power pliers-$60
Sog small pliers-$20
Sog small pliers-$20
Squirt P4-$30
MUT-$110That's all I can think of right now......
-
Oopsy... that can happen :D
-
I'm glad I read the bit about them dropping the mini bit driver in favor of a medium flat head. I don't get it, since the large bit driver already has one?
They should've put the wonderful little package opener from the Wingman in that slot, if anything.
Also, if the regular wire cutter is strong enough to cut a coat hanger without denting, why do we need a replaceable one? Just in case we're feeling stupid and try to cut something exotic?
Another topic: How are you guys carrying the 40 bit set and large driver extension? Is there a way to do it on the stock pouch? Carrying them separately? Bought a different pouch? I saw on Amazon that NiteIze makes a bigger pouch that will carry all of this stuff.
One neat surprise about the bit extension is that it will not only take the proprietary thin Leatherman bits, but also PROPER 1/4" hex ones! This makes a versatile tool even more versatile.
Side note, I noticed the black coating on the bits is just a coating. I thought at first it might be a sign of hardening, but I guess not. Have to go with a proper hex bit in the extension for that. ;)
-
Well I can join thanks too Barry
pics soon but surge has had a rub down and now soaking in a oily bath :D he has a hard week ahead of him ;) -
Well all washed and oiled for starting on the maintenance job again Monday


-
Got a new surge on a trade today.

NOTErized!
-
I might join shortly. Well, I will join eventually. I've been wanting a Leatherman since 1986 and never touched one with my hands yet. Victorinox fulfilled all my needs up to now. But that is going to change, we won't live forever!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
