And so it begins.... (My adventures into Alox!)
-
Robert, you inspired me. I'll do this to a MyFirst Blade and incorporate it into a super Cadet. >:D
-
@crackout said:
Robert, you inspired me. I'll do this to a MyFirst Blade and incorporate it into a super Cadet. >:DGood use of a myfirst blade too! I have a few of those from buying economy my firsts to get the 84mm saws.
I clamped the blade in a vice then used a diamond drum dremel bit. I tried a small one first but the serrations were too small. I think I could have gone bigger, more swiss tool rescue blade size, but the size I did works fine.

-
Fro what I know a serrated blade is not V-shaped. Did you grind the backside flat first?
-
Nope those are just drum cuts made at about a 20 degree angle from one side only. You will get a big bur on the other side, that I then ground off when my belt sander, the just sharpened it on the sharpmaker. I will clean up the goovs by wet sanding them with a small mandrel and fine grit, then they can be polished.
-
I'm lucky in that I have a Serrated Recruit blade sitting in my parts box, I've been planning to get that fitted into a Plain&Serrated two blader too.
Or it could go into a 91mm along with the florist blade, now there is an interesting toolset.Small-----------Large
Cap Lifter-----Sheepsfoot
Saw
Serrated--------Can OpenerNo idea how springs would work out with this
-
I missed this great thread for a while. Lots of super cool things going on, Robert!


-
I was thinking, it would be cool for some of our heavy modders (i.e. Syph) to stock up on Pioneers etc in lieu of the changes luming at Vic. Not that I suspect the Pioneer to be discontinued but you never know. Bottom line is I'd hate to see all these cool mods to cease because of lack of scales.
-
@sawman said:
I was thinking, it would be cool for some of our heavy modders (i.e. Syph) to stock up on Pioneers etc in lieu of the changes luming at Vic. Not that I suspect the Pioneer to be discontinued but you never know. Bottom line is I'd hate to see all these cool mods to cease because of lack of scales.I keep buying 10 more pioneers when Im out of one color run, so I seem to have about a 50 pioneer float at any given time. :D I try not to mentally add up how much money Ive got tied up in parts, but I like to be stocked up so there isnt much choice.
Now.. if they do kill off the alox all together, I do have a plan B. What I would do it make my own alox scales and springs, and then just use tools from 91mm SAKs to build them. The only parts Id really have no source of any longer would be the inline awl, but I could make one up if needed. Regardless as long as I can mill Al, anodize it and make springs there will always be alox scaled SAKs as long as im still modding. :D
-
Ok I got to thinking about the SAK parts, and I do have quite a few. :D
I keep all my parts in plastic bins. These are all new parts, I have a bucket of used msc parts out in the shop that I use for experimenting, but only use the good stuff for building customs.

The stack on the left are each a different scale color. The rest are all parts.
Here are the 91mm parts.

And here are the 93mm goodies.





I have a tackle box where I keep all my 84mm parts, and other msc parts like my colored liners and some special scales for personal projects.


So many parts to make cool things I just need more time! :D
-
DAT LINERS.
-
I'm starting to think you have more Victorinox parts than Victorinox themselves :P
-
That's actually similar to how they lay the parts out before them in the factory.
-
great to see all those parts like that, thanks for the pics!
-
Awesome mate

Interesting project in the top right of your tackle box.. ::)
-
Love those Alox scales!

-
Against my better judgement, Im fitting a layer of plastic parts onto on alox frame. That lite module is a horrid piece of flimsy junk. It cant be its made in switzerland, no way.
Maybe they were prizes in swiss cereal boxes and after one particular bad bender, and while eating morning cereal and nursing a headache, the idea to put one in a swiss army knife was born.

Seriously though, plastic parts on an alox SAK... ??? When I finish this mod I wont ever be using one of the lite modules again, but I may build one with a metal frame in the future. Although really is there any need for a light in a SAK where there are a large variety of keychain flashlights available...



-
I wonder if one of those lite modules can be modified to have better light output...mod the mod? I've heard of doing the same to keychain lights. The fly in the ointment with having a light on the SAK though: what do you do when you need both the light and the tool?

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login