Appreciation for the Explorer
-
I got the same impression about the old and new Philips but I wasn't sure. Thanks Syph Double O-Seven!
-
Those are old Belgian World War I trenches, where they replaced the original sandbags with concrete ones. They are called "trenches of death" near the cities of Diksmuide and Ieper (famous World War I places).
You can read more about that (and some other World War I sites in Belgium) here.
-
@Heinz Doofenshmirtz said:
I'm fond of the Explorer myself. For my needs, my Yeoman is a more economical choice, but I understand the benefit of the full sized Explorer. The next two mods I'm planning on doing are both going to be based on Explorers in fact. One with a saw, to make a Woodsman, and another with pliers.
Are you keeping the scissors on the planned pliers mod or taking them off?
I'm planning on keeping the scissors in both mods I want to do. I'm actually planning on using a Swiss Champ for each, and paring them down to make the aforementioned mods.
-
what are those walls made of?
Those are old Belgian World War I trenches, where they replaced the original sandbags with concrete ones. They are called "trenches of death" near the cities of Diksmuide and Ieper (famous World War I places).
You can read more about that (and some other World War I sites in Belgium) here.
thank you

that link's cool, great pics.
i'd sure like to go there sometime
-
@WiSAKfan said:
^i can see what you are saying about the openers layer, those i don't mind as much. I just find the small blade to be a waste of a spot.now put a file in that spot, and the explorer would be a great combo. or electricians blade...
My thoughts exactly
If there was a nailfile in place of the small blade, I would love my Explorer even more. I want a Yeoman though, as it's a perfect mating of my two faves, the Compact and Explorer. Plus 3 layers is more pocketable than 4, but 4 is definitely doable, even moreso if there was a nailfile in place of the small knife ;) -
^i can see what you are saying about the openers layer, those i don't mind as much. I just find the small blade to be a waste of a spot.
now put a file in that spot, and the explorer would be a great combo. or electricians blade...
My thoughts exactly
If there was a nailfile in place of the small blade, I would love my Explorer even more. I want a Yeoman though, as it's a perfect mating of my two faves, the Compact and Explorer. Plus 3 layers is more pocketable than 4, but 4 is definitely doable, even moreso if there was a nailfile in place of the small knife ;)Okay MR... just to throw you a curveball here... one of the mods I've been wanting to do is a Yeoman with a saw! :D Been thinking that would be the perfect hiking/backpacking/outdoors pocket SAK!
-
@J Mackrel Jones said:
But why the nailclippers when you have the SAK scissors?I prefer fingernail cutting with the clippers. I'll give the scissors a try and see how that goes. I'm always trying to downsize. If I could lose the clippers, that would be good. I've already dumped the whistle after carrying it for probably 5 years (and using it maybe once a year).
And what do you do with the marker?
Well, remember that when folks who never carry an MT starting carrying one, they start using it and decide they can't live without it. Same thing often with flashlights and other gear - when you start carrying it, you starting using it and figure out that you "need" to carry it. Thats the way it is with the Sharpie. I use that sucker all of the time. Stuff like writing names on your kids' drinks. My light gets the most usage, but the Sharpie is second.
-
@Heinz Doofenshmirtz said:
^i can see what you are saying about the openers layer, those i don't mind as much. I just find the small blade to be a waste of a spot.
now put a file in that spot, and the explorer would be a great combo. or electricians blade...
My thoughts exactly
If there was a nailfile in place of the small blade, I would love my Explorer even more. I want a Yeoman though, as it's a perfect mating of my two faves, the Compact and Explorer. Plus 3 layers is more pocketable than 4, but 4 is definitely doable, even moreso if there was a nailfile in place of the small knife ;)Okay MR... just to throw you a curveball here... one of the mods I've been wanting to do is a Yeoman with a saw! :D Been thinking that would be the perfect hiking/backpacking/outdoors pocket SAK!
Yeah, that would be a great outdoors SAK. Personally, I'm not a big fan of having a saw on my SAK, but mainly because I also carry a full size MT and that's where I prefer my saw. Still, if all you were carrying outdoors was a SAK, your modded version would be ideal to me as well

-
They look nice when they are new and shiny. When they start getting banged up, I hit mine with Mother's Mag wheel polish which restores a little bit of the shine - at least temporarily.
-
My second VIC SAK (first paid for with my mney when i was 13/14) is an explorer. It replaced my lost ranger and after not ever really using file or saw it became a better tool as the philips filled a lot of task.
To this day i have never sucessfully set fire to anything with the old glass mag :-\
Persoanlly i would like it in a lite incarnation instead of the mag... would get way more use then!
-
The Explorer is one of my two favorite SAK's, the other one being the Swisschamp 8).


good pics
...Beautiful!

-
I'll check in before this dies. I'm new here but I've had a Vic SAK in my pocket for about 40 years. The Explorer has the perfect tool set for me. I prefer two blades to one and I like the "real" openers better than the combo tool. Unfortunately I find 4 layers a bit too thick most of the time. Hence, my carry knife since 1996 has been a Yeoman and before that a Scientist.
Someone back a page or two asked about which was better between the old gray/glass mag and new clear plastic version. My Yeoman has a small scratch and 3 or 4 little pits on the mag gleass after carry for good while. I can only imagine what a plastic one would look like by now. Slightly less magnification might make it more versatile but surely the plastic construction more short lived. Another product enhancement!
-
Great thread steve!! The explorer is probably my favorite SAK. I carry mine every day all day. I love the toolset and I find that my explorer plus covers most of my needs to the point that in dont really need my leatherman all the time. I have considered dropping the pliers based tool out of edc just to see if I'd miss it. I rarely need it at home and at work I have a whole toolbox at my fingertips.
Sent from my Galaxy S3 using crapatalk two point oh.
-
@stot said:
I'll check in before this dies. I'm new here but I've had a Vic SAK in my pocket for about 40 years. The Explorer has the perfect tool set for me. I prefer two blades to one and I like the "real" openers better than the combo tool. Unfortunately I find 4 layers a bit too thick most of the time. Hence, my carry knife since 1996 has been a Yeoman and before that a Scientist.Same story for me (except the 40 years part) in that the Explorer is nearly perfect for me, with the exception of the 4 layer thickness. I find it doable, but not ideal. I think 3 layers is my max, and a Yeoman would be perfect for me. I have the Compact as well, and the Yeoman is just adding the magnifier/phillips layer to it. I would like to have my Compact and Explorer modded to create a Yeoman as they are just about impossible to find nowadays.
-
Well, it isn't available in my country, but that doesn't mean I don't like it. I think what it misses from being perfect is a light, but thinking I can get that externally(although I would like having EVERYTHING I need in a single SAK(magnifier, LED, Phillips, openers/combo tool, scissors, pen optionally small blade) that is impossible, but Yeoman and Explorer get VERY close, alongside Cybertool Lite(cheaper one of the two SAKs that have both the LED and the magnifier, the other being swisschamp XAVT- Vic's largest SAK yet.)
-
After years of hoarding it unused, I pulled out of my arsenal today a Swissbianco Yeoman Plus wearing yellow scales. Completely shiny and virginous. I can't remember why I was not using it, so now its my new EDC. As much as like the Explorer, the Yeoman is 3 layers, combines the Explorer's can and bottle openers into the one multi purpose tool, and loses the small blade and awl. Its even more awesomer than the Explorer, though of course I can't be completely satisfied and would like to see an awl instead of the hook. But overall it provides the functionality of the Explorer Plus but at 3 layers. Why on earth Victorinox does not mass produce this flavor is beyond me.

-
@powernoodle said:
Why on earth Victorinox does not mass produce this flavor is beyond me.Because then people would only buy a yeoman, instead of an explorer and a compact! :D
-
Thats 100% true, Syph.
-
Syph is correct and it aggravates me that I can't have a Yeoman without having someone make it for me. The Compact is near perfect for me, as is the Explorer, so naturally the Yeoman would be my ideal SAK. It's just frustrating that I can't simply buy one.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login