Appreciation for the Explorer
-
@Monrogue said:
Syph is correct and it aggravates me that I can't have a Yeoman without having someone make it for me. The Compact is near perfect for me, as is the Explorer, so naturally the Yeoman would be my ideal SAK. It's just frustrating that I can't simply buy one.I watched two Yeomans sell on EBay in the last month, so they're around. It would be more fun to make one. I tore down a tinker and used the phillips to make an apprentice.(Baby steps) Next I'll remove some bent scissors from an Explorer to make my Passenger. This might be as good a carry knife as the Yeoman. I plan to carry one for a while and see how much I miss the scissors. If all that goes well I'll turn my Compact into a Scientist. I carried one years ago and liked it. I picked up a couple of new Scientists 10 or so years ago but they seem to be so valuable on Ebay now I think I make one for my own use. It wouldn't be as much fun if you could just go down to the store and buy one?
-
Syph is correct and it aggravates me that I can't have a Yeoman without having someone make it for me. The Compact is near perfect for me, as is the Explorer, so naturally the Yeoman would be my ideal SAK. It's just frustrating that I can't simply buy one.
I watched two Yeomans sell on EBay in the last month, so they're around. It would be more fun to make one. I tore down a tinker and used the phillips to make an apprentice.(Baby steps) Next I'll remove some bent scissors from an Explorer to make my Passenger. This might be as good a carry knife as the Yeoman. I plan to carry one for a while and see how much I miss the scissors. If all that goes well I'll turn my Compact into a Scientist. I carried one years ago and liked it. I picked up a couple of new Scientists 10 or so years ago but they seem to be so valuable on Ebay now I think I make one for my own use. It wouldn't be as much fun if you could just go down to the store and buy one?
I watch ebay as often as I can, but I have never seen one. Any time I've used "Yeoman" as my search, I don't get any actual Yeomans. I know the search and anticipation, etc. is fun, but I don't have enough time or money to spend searching/getting one. I also can't mod either, which is something I would love to get into eventually, when I can afford the necessary equipment, and find space for it. If I could mod, then I could make one myself from my Compact and Explorer. If I was brave, I would attempt to take them apart, but I don't want to risk ruining them in the process, and it doesn't help that I really wouldn't know what I was doing ::)
-
buy a beater 3 or 4 layer sak for a few dollars. make it into a 2 layer or 1 layer. Rinse repeat.

-
buy a beater 3 or 4 layer sak for a few dollars. make it into a 2 layer or 1 layer. Rinse repeat.

Good suggestion
The thing is, I have no equipment with which to experiment. Is there anything I really need to have to try this, or can mods be done without anything special?"When the only tool you have is a hammer, every problem starts to look like a nail" :D
You really do not need much tools or space to get started. Check out the Mod Squad for everything you need to know.
-
buy a beater 3 or 4 layer sak for a few dollars. make it into a 2 layer or 1 layer. Rinse repeat.

Good suggestion
The thing is, I have no equipment with which to experiment. Is there anything I really need to have to try this, or can mods be done without anything special?**"When the only tool you have is a hammer, every problem starts to look like a nail" ** :D
You really do not need much tools or space to get started. Check out the Mod Squad for everything you need to know.
Love that line
Thanks for the suggestion 
-
buy a beater 3 or 4 layer sak for a few dollars. make it into a 2 layer or 1 layer. Rinse repeat.

Good suggestion
The thing is, I have no equipment with which to experiment. Is there anything I really need to have to try this, or can mods be done without anything special?My Yeoman was my first, and so far only, mod. I'm planning on making more though.

I didn't have any special equipment, and found I only needed a very minor investment in tools. I already had a bench vise with an anvil on it, so if you don't have something like that, I think it would be a good idea to get one, though you could probably do without it. I also bought a center punch for making divots in the ends of the pins to help with drilling them out, and a set of small pin punches for knocking out the pins once I had drilled the peen out of the bushing. I used a hand-drill, and I'm sure I could have gotten better results if I had a drill-press, but it wasn't necessary. I also bought a small jeweler's hammer to use for peening the new pins.
I took apart a Compact and an old Explorer to make my Yeoman. While I did end up mismatching the blade and the side plate when I put it back together (there's an annoying bit of side to side play in the blade as a result), it was a very enlightening and rewarding experience.
Definitely took me out of my comfort zone, and really forced me to think back and remember what I learned in a semester of machine shop in high school. But, I'm glad I did it, and am looking forward to making more mods in the future, once I can afford to buy appropriate donors. 
-
@Santos said:
buy a beater 3 or 4 layer sak for a few dollars. make it into a 2 layer or 1 layer. Rinse repeat.
i agree. for what you'd end up paying for a real yeoman it just doesn't to make sense to use it as edc when you can buy a used explorer and a bantam. I feel terrible tearing apart a perfectly good compact just for the combo tool and suggest the using the bantams.
there really aren't that many tools needed to do these mods. the sticky threads on the top of the mod section do a great job explaining it.
-
We started out loving Explorers and now we're tearing them apart to make stuff out of them. I guess that's still loving em.
-
buy a beater 3 or 4 layer sak for a few dollars. make it into a 2 layer or 1 layer. Rinse repeat.

i agree. for what you'd end up paying for a real yeoman it just doesn't to make sense to use it as edc when you can buy a used explorer and a bantam. I feel terrible tearing apart a perfectly good compact just for the combo tool and suggest the using the bantams.
there really aren't that many tools needed to do these mods. the sticky threads on the top of the mod section do a great job explaining it.
Oh...I was under the impression that the Yeoman was basically a Compact with the mag/phillips layer added. I was hoping to just remove that layer from my Explorer and add it to my Compact. I'm probably severely over-simplifying it though

-
@Heinz Doofenshmirtz said:
buy a beater 3 or 4 layer sak for a few dollars. make it into a 2 layer or 1 layer. Rinse repeat.

Good suggestion
The thing is, I have no equipment with which to experiment. Is there anything I really need to have to try this, or can mods be done without anything special?My Yeoman was my first, and so far only, mod. I'm planning on making more though.

I didn't have any special equipment, and found I only needed a very minor investment in tools. I already had a bench vise with an anvil on it, so if you don't have something like that, I think it would be a good idea to get one, though you could probably do without it. I also bought a center punch for making divots in the ends of the pins to help with drilling them out, and a set of small pin punches for knocking out the pins once I had drilled the peen out of the bushing. I used a hand-drill, and I'm sure I could have gotten better results if I had a drill-press, but it wasn't necessary. I also bought a small jeweler's hammer to use for peening the new pins.
I took apart a Compact and an old Explorer to make my Yeoman. While I did end up mismatching the blade and the side plate when I put it back together (there's an annoying bit of side to side play in the blade as a result), it was a very enlightening and rewarding experience.
Definitely took me out of my comfort zone, and really forced me to think back and remember what I learned in a semester of machine shop in high school. But, I'm glad I did it, and am looking forward to making more mods in the future, once I can afford to buy appropriate donors. 
Good to hear all of this. I have an explorer and Bantam for possible modding uses.
I have been drooling over a Yeoman.
We are basically neighbors.
:DIn all seriousness i'm not ready to donate my Explorer to be torn down right now, but I am planning on buying another when I get the money and using the existing Explorer as Mod material. If your interested then we should talk.

-
@stot ^ lol, good point. I believe it is still showing them respect by giving them new lives. It's similar to art that deconstructs different art and reuses it in new ways.
airports and the internet have really changed the game in how these little guys can get around.
Monrogue, I would say we are really just taking about model semantics, don't be worried. I believe technically the yeoman to be an explorer with one less layer. Yes you get the same thing adding a phillips/mag layer to compact, except you'd have the hook with file that the compacts have. The original yeomans don't have that.
My point is save that awesome compact and use it for what it is (great 2 layer knife) and sacrifice a bantam, which you can find cheap.
yes the nail nick sits a little lower. again nothing that would make me personally want to use a compact over a bantam for it.
opinions may differ
-
@WiSAKfan said:
@stot ^ lol, good point. I believe it is still showing them respect by giving them new lives. It's similar to art that deconstructs different art and reuses it in new ways.airports and the internet have really changed the game in how these little guys can get around.
Monrogue, I would say we are really just taking about model semantics, don't be worried. I believe technically the yeoman to be an explorer with one less layer. Yes you get the same thing adding a phillips/mag layer to compact, except you'd have the hook with file that the compacts have. The original yeomans don't have that.
My point is save that awesome compact and use it for what it is (great 2 layer knife) and sacrifice a bantam, which you can find cheap.
yes the nail nick sits a little lower. again nothing that would make me personally want to use a compact over a bantam for it.
opinions may differ
Oh I see :) I like that hook with the file actually. I love the Compact as it's nearly perfect, but it lacks any sort of phillips screwdriver, and I love the mag glass as it's both fun and useful. If I could just get that mag/phillips layer on my Compact, I would quite possibly have my ideal SAK. One can dream
:D -
Here is what I normally carry instead of my Explorer. I love that it has the inline Philips and mag glass like the Explorer, but with Pliers and Awl. I'm thinking I am going to start carrying the Explorer for a while though.



-
If you put scissors on that Soldier instead of the pliers, then that would be the perfect one for me!

-
@captain spaulding said:
Here is what I normally carry instead of my Explorer. I love that it has the inline Philips and mag glass like the Explorer, but with Pliers and Awl. I'm thinking I am going to start carrying the Explorer for a while though.


Is that Alox SAK modded? That's a pretty neat combo of tools. My ideal Alox would be the knife/awl layer-scissors layer-mag glass layer with both openers fit side by side at the other end.
-
I wouldn't call it a Soldier, but I do agree scissors would be great. I honestly love the size of it as is though.
-
I am considering a Climber Plus 1 layer model for EDC as a lighter pocketable alternative to my XLT and more capable in an urban setting that what I now have. I am puzzled about the 4th layer and currently I am inclined to a Mountaineer. Explorer's Philips can be substituted by the Can Opener's driver or the File's tip for smaller screws. The lens is useful but not every day need. The File's tip removes staples and can be magnetized I guess for tiny screws fishing. The file does manicure (the old type is preferred here) and together with the saw are useful for work on plastic (all around in the town) and also for metal and even wood. But I didn't make up my mind yet.
Are there any other suggestions for the "best" 4th layer option? I guess the 3rd layer is scissors (and hook) for a great majority of us, that's what Mods usually do anyway. -
@captain spaulding said:
@Heinz Doofenshmirtz said:
buy a beater 3 or 4 layer sak for a few dollars. make it into a 2 layer or 1 layer. Rinse repeat.

Good suggestion
The thing is, I have no equipment with which to experiment. Is there anything I really need to have to try this, or can mods be done without anything special?My Yeoman was my first, and so far only, mod. I'm planning on making more though.

I didn't have any special equipment, and found I only needed a very minor investment in tools. I already had a bench vise with an anvil on it, so if you don't have something like that, I think it would be a good idea to get one, though you could probably do without it. I also bought a center punch for making divots in the ends of the pins to help with drilling them out, and a set of small pin punches for knocking out the pins once I had drilled the peen out of the bushing. I used a hand-drill, and I'm sure I could have gotten better results if I had a drill-press, but it wasn't necessary. I also bought a small jeweler's hammer to use for peening the new pins.
I took apart a Compact and an old Explorer to make my Yeoman. While I did end up mismatching the blade and the side plate when I put it back together (there's an annoying bit of side to side play in the blade as a result), it was a very enlightening and rewarding experience.
Definitely took me out of my comfort zone, and really forced me to think back and remember what I learned in a semester of machine shop in high school. But, I'm glad I did it, and am looking forward to making more mods in the future, once I can afford to buy appropriate donors. 
Good to hear all of this. I have an explorer and Bantam for possible modding uses.
I have been drooling over a Yeoman.
We are basically neighbors.
:DIn all seriousness i'm not ready to donate my Explorer to be torn down right now, but I am planning on buying another when I get the money and using the existing Explorer as Mod material. If your interested then we should talk.

Just let me know! :) As a rough guesstimate, I'd say it'd take an afternoon to do it all from the beginning; taking apart the donors, setting new pins, doing the assembly, and pinning it all back together and putting scales on. I'm sure someone more accomplished than I at modding could do it in a fraction of the time, but now that I've already done one, I've got a pretty good idea of how to streamline the process.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login