Paladin PT-540
-
It's still not the same as all outside opening as vic/bear. One of the reasons vic bought bear was to obtain usage of that patent. Others can have similar but not the same way of tool arrangement.
-
@Raukodur said:
Indeed, it seems you can get it for £97 here:http://www.markertek.co.uk/ProductDetails.asp?ProductCode=PAL-PT540
BUT, that is still an exorbitant amount IMO. £75 would be the upper limit I would be willing to pay, maybe that is unrealistic.
I think it costs so much because it is such a speSmurfpillsed, high quality tool. A Venn diagram of "network installers" and "people who carry multi-tools" probably doesn't have a great overlap.
-
@Raukodur said:
Bob, how does the tool compare to your other tools you may consider to EDC? As I have mentioned before, if I was to get one, I would swap out the electrician specific tools for more general ones.How do you find the all inside tools, especially with the flappy panels, compared to e.g. the spirit or swisstool all outside tools, of the LM wave/charge/surge partially outside opening tools config?
Overall build quality is top notch, but it would never be a good EDC for me. :-\ The monstrous overall size is an immediate deal killer, as I prefer a less conspicuous carry tool. (A professional tradesman who used a tool hard throughout the day might feel differently of course)
Deal killer #2 for me applies to all SOG PowerLocks as well: The Flappers. :P Set aside for the moment how clumsy they are and the extra steps required every time an implement is needed. Instead just consider how the very presence of flappers on SOG tools forces all four outside "long" blades to be nearly one half inch shorter than they would otherwise need to be. (the blades have to be short in order to fold clear of the flapper pivot point)
The PT-540 for instance, a great big strapping brute of a tool, still comes with four outside blades that are shorter than those of physically smaller models like the Vic SwissTool or the Leatherman Core. Even much smaller multitools like your Charge have bigger knives than the PT-540. All because of the flappers. ::)
If I'm going to carry a big tool, I expect it should have big blades.

-
Excellent short review there!
SOG need to change it to an all outside opening tool, like a swisstool / spirit, and that would allow them to put in some huge tools to match the size of the beast. And of course do away with those flappy paddles and make it much more elegant to use.
-
I'm bumping this old topic
I'm going after a 540
wish me luck
I really want to try one of these.
I may do some tool swapping and make my dream sog work tool.

-
@JAfromMn said:
I'm bumping this old topicI'm going after a 540
wish me luck
I really want to try one of these.
I may do some tool swapping and make my dream sog work tool.
If you happen to find two (at a reasonable price, say less than $US 80) please let me know

Also I have some spare SOG tool components which may help with your tool swapping.
-
Well lads I hope you have industrial trouser suspenders too stop your duds falling down :P :D
Be interesting to see if Paladin is using old SOG parts made in the US or if they have changed over to SOG's current supplier

-
I'm bumping this old topic
I'm going after a 540
wish me luck
I really want to try one of these.
I may do some tool swapping and make my dream sog work tool.
If you happen to find two (at a reasonable price, say less than $US 80) please let me know

Also I have some spare SOG tool components which may help with your tool swapping.
I got a lead on some old stock at my wives work.
Il get them on her employ s discount.. Il try get a few :)
@MultiMat said:
Well lads I hope you have industrial trouser suspenders too stop your duds falling down :P :DBe interesting to see if Paladin is using old SOG parts made in the US or if they have changed over to SOG's current supplier

there old stock I'm sure they were made before 2009 they should be made in USA.
Im hoping there is a stack of them that got forget about .
-
The PT 540 is for those folks that think the Surge is too dainty....
Def
Sent from a digital multitool
-
I like the plier head.
I think it may have been made for me lol
-
@Grant Lamontagne said:
The PT 540 is for those folks that think the Surge is too dainty....Def
Sent from a digital multitool

Well, it's still smaller than a Blacktip. :D
-
Very true. That Black tip is massive!
Def
Sent from a digital multitool
-
I'm bumping this old topic
I'm going after a 540
wish me luck
I really want to try one of these.
I may do some tool swapping and make my dream sog work tool.
If you happen to find two (at a reasonable price, say less than $US 80) please let me know

Also I have some spare SOG tool components which may help with your tool swapping.
I got a lead on some old stock at my wives work.
Il get them on her employ s discount.. Il try get a few :)
@MultiMat said:
Well lads I hope you have industrial trouser suspenders too stop your duds falling down :P :DBe interesting to see if Paladin is using old SOG parts made in the US or if they have changed over to SOG's current supplier

there old stock I'm sure they were made before 2009 they should be made in USA.
Im hoping there is a stack of them that got forget about .
I might be interested as well, let me know.
-
No luck.
I tried
sorry if I got anyones hopes up
I'm bummed to.
I really like the pliers on the 540.
-
No problem. I wasn't looking for an EDC, more just to satisfy my curiousity. One will turn up some day.
-
@gregozedobe said:
No problem. I wasn't looking for an EDC, more just to satisfy my curiousity. One will turn up some day.we'll find ours :)
-
However, I did find a shop with stocks of the even more massive SOG Blacktip :o I might just have to get me one of them ;)
-
Got me excited. I was looking for one last year but not even a nibble. I think I have a better chance at finding a unicorn or mermaid than a PT-540.
-
They are still around, and if you are prepared to pay silly money there are some places claiming to sell them new ($ 160 - $240 IIRC, google paladin pt-540 or paladin powerplay and spend a while sorting through the search results and you should see them ). I'm just too much of a cheapskate and will keep on looking on ebay for some a bit less expensive (I'm not looking for a user, just to satisfy my curiosity).
-
I'm going to keep the hope that I find a good user.
they cheapest I could find is around 175.
way out of my budget for a work tool.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login