My small adventure into 58mm SAK modding!
-
I finished the T&T holder layer. Worked out perfectly.










Now I just need the rest of my donors to show up and I can put together the monster. :D
Cheers
-
that is very cool
-
Very cool. 8) Did you cut that by hand? No you got me wanting to do it too. :ahhh
-
@enki_ck said:
Very cool. 8) Did you cut that by hand? No you got me wanting to do it too. :ahhhYup, with my jewelers saw. :D I was thinking about trying to make one for the pen holder to put in a middle layer to put the stylus in since one scale tool is already the pen, but the stylus adds yet another tool.
I think that would about be all i wanted to add. That other file variant is only found on old duchess's and they seem to cost too much. Although I did find one tool variant the original 58 monster doesn't have. Its the sd tip ruler, but it has no rule on it. Just a flat plain tool with an sd tip, so I have to find one other tool to pair it with. Id love to track down the old file version, but no luck yet.
On there is also the whistle scale. If I did interior layered pen and stylus, I could then have a whistle scale but Ive never found one for sale.
-
I've seen a used one (the whistle) on eBay a couple of months ago. It went for about $8 if I remember correctly. Maybe Tim can get you a used one somewhere. Neil used to have a bunch of them. Usually for less than $10 http://www.edcsource.com/...uction_id,auction_details
Maybe he has some left and you can get one when he gets back. -
When I added a tweezers channel on my 6mm wood scales I gouged out the wood right where the tweezer legs spread open at the epoch. This helps keep the tweezers in place and prevents them from being molded flat for longer periods of time.
Left scale

You have room for that on your idea, but would entail a bit more work too. By opening <u>both</u> sides to accommodate the tweezer spread width this would not only help maintain the bent sprung shape but also hold the tweezers into the material. As opposed to pancaking them in between a thin channel.
-
Hmm I didnt think about whether the tight quarters would compress the tweezers over time, but thats a good idea to leave some extra space at the end for it to expand. I'll widen that part before I do the final assembly.
-
Lookin good, Syph!
I like those silver tech scales.
-
The new white leds are surprisingly bright. Oddly enough there seem to be 2 stages as well. Both of these are white led, but one is noticeably bluer in tint and about half as bright.

[/quote]The battery quality on one might be slipping, try them with brand new batteries. But I agree with you, the newer white LED's are surprisingly bright for such a crappy little power source.
-
I'm still waiting on donors for my mega monster build, but in the mean time to satisfy my 58mm modding urges I knocked up some cartridge brass scales and liner today. I do love the look of brass. :D I think I'll likely put together a rambler with these.


Next is going to be Ti scales and liners as a few folks have expressed interest in those.
-
I'd love to make a brass lined Rambler...blue alox scales and brass liners would be the thing for me right there.
-
would love a ti scaled rambler.
-
I'm a ninny...I started to say that the first liner looked ok, but the other two looked too thick.

-
Hay syph. How thick is the brass you are using for the scales?
-
That Brass looks lovely

-
The brass is 1/16 inch (0.062") thick. It feels just about right for that size of SAK. The liner is 0.015. I actually got a rambler built with those scales, it just needs to be polished and I'll snap some pics.
-
@Syph007 said:
The brass is 1/16 inch (0.062") thick. It feels just about right for that size of SAK. The liner is 0.015. I actually got a rambler built with those scales, it just needs to be polished and I'll snap some pics.The scales look great. A brass 58 is what I am thinking to cut my teeth on sak mobbing with. Looking forward to the pics.
-
The brass is 1/16 inch (0.062") thick. It feels just about right for that size of SAK. The liner is 0.015. I actually got a rambler built with those scales, it just needs to be polished and I'll snap some pics.
The scales look great. A brass 58 is what I am thinking to cut my teeth on sak mobbing with. Looking forward to the pics.
Ya I like working with brass alot. Cuts nice and its easy to shape and sand. The big con of course is weight, but its not as noticeable on the little guys. Full thickness 93mm SAK scales in brass though are very heavy. Well pretty much the same weight as steel.
If my 2 yr old cooperates for bedtime, tonight I'm cutting some 58mm Ti liners and scales. I got an order for a full Ti converted minichamp and its always fun to work on something new.
-
The brass is 1/16 inch (0.062") thick. It feels just about right for that size of SAK. The liner is 0.015. I actually got a rambler built with those scales, it just needs to be polished and I'll snap some pics.
The scales look great. A brass 58 is what I am thinking to cut my teeth on sak mobbing with. Looking forward to the pics.
SAK mobbing
if that where 200 people turn up in a public place and start fixing things with little red pocket knives?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
