The Splash - LM Squirt Mod
-
Lovely.I always think this tool is bigger than it is until the bit and bit holder puts it into scale.
My mind wants me to believe it´s about the size of a 84/91 mm, don´t know how, maybe because it´s so feature-packed. -
I think it's fantastic, it should be called the MINI METRO!!!

-
If the new scales fit, I'll make sure that anyone can have their own Splash. I adjusted the pivot screw head boss but the pivot hole itself will always need refinement. Anyone with a little dremel experience will do it :)
-
The 3D printing madness continues!
I spent a little bit of time yesterday drafting up the scissor spacer layer and tweezer layer of the PS4 and S4. This way, anyone can just buy the parts to build their own Splash-ette.
Check it out! I added the straight pin slot into the design of the tweezer layer, it didn't cost anything, in fact costs LESS due to the material volume being lower (however minute).

The Scissor Spacer is as issued, but unlike the ones that come with the ES4 and PS4, this one will be made from Ultra Detail frosted clear plastic instead of the black. This will be sandwiched in between the frame and the scale so strength isn't that important. The reason why I designed these to bolt in is because you will no longer need to buy a brande new PS4/ES4 just to harvest the scissors, you can easily buy a MUCH less expensive Style keychain and torx screw it open to have the scissors.
The Style scissors, however, do not come with a spacer, hence the 3D printable one!

I ordered 3 of each and a set of Ultra Detail scales just for fun, throwing them into ONE file reduces greatly reduces the cost. I'll know in about a week if these work!
HACK ON!
-
Made a little tool to help me align the pivots and tools when assembling and disassembling squirts. I machined A tapered aluminum handle and fitted a broken dremel bit in the top.

The tip has been tapered a tiny bit to aid in slipping into the semi aligned holes.
It

it is also stepped to receive a pivot on the end.

Why? It's pretty simple.

Semi align the pivots, push the tool through the hole, perfect alignment.

Then stick a pivot pin on the end.

And push back through! No fuss.

-
That's a very good idea. I always had trouble realigning the Squirt and Style CS when I took them apart.
-
@Metropolicity said:
The 3D printing madness continues!I spent a little bit of time yesterday drafting up the scissor spacer layer and tweezer layer of the PS4 and S4. This way, anyone can just buy the parts to build their own Splash-ette.
Check it out! I added the straight pin slot into the design of the tweezer layer, it didn't cost anything, in fact costs LESS due to the material volume being lower (however minute).

The Scissor Spacer is as issued, but unlike the ones that come with the ES4 and PS4, this one will be made from Ultra Detail frosted clear plastic instead of the black. This will be sandwiched in between the frame and the scale so strength isn't that important. The reason why I designed these to bolt in is because you will no longer need to buy a brande new PS4/ES4 just to harvest the scissors, you can easily buy a MUCH less expensive Style keychain and torx screw it open to have the scissors.
The Style scissors, however, do not come with a spacer, hence the 3D printable one!

I ordered 3 of each and a set of Ultra Detail scales just for fun, throwing them into ONE file reduces greatly reduces the cost. I'll know in about a week if these work!
HACK ON!
I must be honest, I'm not grasping this at the minute ... though I might just be having a dense moment ::) I look forward to you getting the actual articles so the penny will drop

-
Metro, keep up the great work. I love seeing the stuff you do

-
@50ft-trad said:
I must be honest, I'm not grasping this at the minute ... though I might just be having a dense moment ::) I look forward to you getting the actual articles so the penny will drop
They are direct replacements. I just copied the parts that existed except for the pin slots which is my doing.
You'll see :)
-
Man! That pivot alignment tool is genius! I'm going to have to make one of those.
Keep the good stuff coming.
-
@Lunatech said:
Man! That pivot alignment tool is genius! I'm going to have to make one of those.Keep the good stuff coming.
It works REALLY well. I may even have to make one for my larger tool mods. I would have to make a bigger 7/32 one and a 3/16 one with a flat on one of sides to match up with the washers. That's how the assembly line does it in the factory.
-
YAY!
First legit use of the 3d Phillips!
The belt broke on our downstairs vacuum, had to take off the cover to replace it.


The offender.

-
Amazing.
You should patent some ideas!
-
@Sr.Multiherramienta said:
Amazing.You should patent some ideas!
Funny you should say that...I am going to talk to someone soon!
-
Amazing.
You should patent some ideas!
Funny you should say that...I am going to talk to someone soon!
About bloody time!
-
About bloody time!
Who knew my ideas would actually become something!
Erm.... I did ::)
-
Yup, we all saw this coming
Congrats ! -
A genius is never recognized by himself...if his name is metropolicity :P
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login