My small adventure into 58mm SAK modding!
-
Very nice Rambler, you very nearly made the rivets disappear...I had to look a couple of times before I spotted them.
-
Very nice. I am going to try and make a start on a brass 58 of my own tomorrow. If it turns out anywhere near as good as your I will be happy
-
The only part I found hard was polishing the scales after it was assembled. I like to polish parts on their own, then assemble, but obviously since I riveted this one, I had to sand the rivets flush then polish again. For the Ti ones I'm going to screw those together with 0-80 screws.
-
Ok so tonight was prototype night and I came up with something pretty wacky, but with a purpose in mind... :D







So you see that I am bascially making a 58mm version of the wenger pocketgrip! :D Still a prototype and I need to make a clasp to hold the pliers closed but I see no reason why it cant work. I wanted to carry a swiss keychain tool for ages to replace my leatherman P4, but I needed pliers! So this idea was born.

Its funny, I remember thinking it would be really hard to add pliers to an 84.. but doable... I never thought adding them to a 58 was even close to realistic, but then I remembered that doing them fixed mode was an option and I'm very pleased with the concept so far. :D
-
OK, my first thought when I saw the first pic was WTF :ahhh Dut you seem to have a plan and it looks interesting
How do you intend to keep the pliers closed? -
Not sure yet, but my brain is churning trying to come up a simple closure method.
-
How about attaching a bail to the rivet big enough that it can catch the pliers, and cutting a small indent on the top of the plier handle for the bail to catch?
-
You could always make a special liner that has small extension from it and add a clip to hold the pliers shut?
-
Not sure yet, but my brain is churning trying to come up a simple closure method.
What about something like this?

I love that idea Rob!
That was what I was trying to describe. ;)
-
WOW, and you have the cheek to call my ideas crazy!! :D :D
That's SMURFIN AWESOME
-
That's a really cool mod, but how are those pliers going to fit on my mod now?

I'm thinking a bail type attachment with a slight notch in the pliers handle would work nicely to keep them closed up. Nice work on that, definitely a unique mod for sure.
-
That was what I was trying to describe. ;)
Sometimes pics are worth 24 words :D
I was actually thinking of a 74mm SAK by Peter that had a similar bail attached to the rivet. :D But that picture works too. ;)

-
@Syph007 said:
Ok so tonight was prototype night and I came up with something pretty wacky, but with a purpose in mind... :D






So you see that I am bascially making a 58mm version of the wenger pocketgrip! :D Still a prototype and I need to make a clasp to hold the pliers closed but I see no reason why it cant work. I wanted to carry a swiss keychain tool for ages to replace my leatherman P4, but I needed pliers! So this idea was born.

Its funny, I remember thinking it would be really hard to add pliers to an 84.. but doable... I never thought adding them to a 58 was even close to realistic, but then I remembered that doing them fixed mode was an option and I'm very pleased with the concept so far. :D
I really do try and avoid the word "awesome" as much as I can as I feel it's over-used. However......
.......that's AWESOME! :ahhh

-
That is awesome!

-
Eh it's not bad ;). No really that what's I call thinking outside the box.
-
Love it! :D
-
Are you going to do like me and whack a USB drive into it? Or is that part of your monster build?
-
Today was Ti day at the Syph shop. Working on a cadet and also a 58mm.
Here are some pics of the cut out 58mm scales. Top side has 1/16 holes with 3/32 countersunk to recess the torx T5 socket heads. Back scale is drilled and tapped for 0-80 thread.
Nothing has been done to the scales yet except shape profiling. Next I have to round over the edges and burn though $20 of sand paper! :D Oh and I need 2 liners too, this if for a mini champ conversion.
It was serendipitous when I realized the OD of 0-80 thread was 1/16 inch, the pivot size for 58mm tools. I would not have tools pivot on threaded pivots normally, but on these tiny guys it really isnt an issue. I did tests and they work just perfect.
It's REALLY nice to mod a tool and not have to drill and sand out all the bloody tools... I get to leave all the tools and springs 100% stock and just focus on the Ti frame fabrication!




Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login