99¢ Worth Every Penny
-
I ran this thing through some paces today.
On my scissor test, it scored a +1
That's pretty terrible. It's good for paper and PETE plastic bottles, and won't cut much else.
Here's a link to my Scissor Test thread for reference.
</topic/36798
Strangely, it would cut the outer sheathing on 550 paracord, but not the inner nylon strands.I spent some time to sharpen the blade (now paper-cutting sharp), and then went at this thing with a file. I brought the nail file's scraper tool to a better point for cleaning under the nails. The phillips was camming out of screws badly, so I removed the tip so it seated into #2 phillips screws better. Still not great, but better than nothing. The flathead didn't require any work. I spent maybe 5 minutes getting the mini flathead to actually slot into an eyeglass size screw, and now it works fine.
The saw... The saw is both small (smaller even than the one on the Berkley Fishing Tool), AND goes dull. I notched an oak board to a depth of about... maybe 2mm, and the saw is now dead.
I tested the cap lifter against the Leatherman Squirt, and it did better than the Squirt. It was not as good as I'd hoped it might be, but not bad either.
I didn't test it as a wrench, and it's a shame the hex wrench cutouts don't have a size that would fit a standard hex bit.
As it stands, with a little work, it's not completely terrible. I wouldn't carry it, but for the price, it has some merit.
-
nice review.
the cap lifter was the most useful bit on it, from what i remember. everything else was just sort of "its there in case you need it" for me. glad to see another user give it some fair play.
-
For the last week or so, I've had my Tool Logic version tucked in a pocket in my wallet with an IDL T7. Today that teeny weeny driver tightened a screw in my glasses. First job it's done since it's been in there, but it did the job I needed it to :)
-
One of the first things I check on ANY little MT I get is whether that little screwdriver actually slots into an eyeglass screw. I don't need that tool often, but when I need it, I REALLY need it. As I said above, I filed the tiny driver into shape on this tool, so I know, should the need arise, it's up to the task. Good to hear this little cheapo saved the day for you, 50ft-trad.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login