Wood Scaled SAK pictures thread.
-
The hardest part about this one was getting the order of the blades worked out so that all the nail nicks were accessible/
-
Victorinox Spartan & Hunter XT-CS with black ebony sclaes and red fiber as set


For more pics feel free to visit my blog :)
-
Nice work.... like red liners a lot :D
-
Thanks a lot! :)
-
Anyone have one of these 2009 VSAKCS wood Compact models? I never did like the way it turned out. The letters almost seem embossed to me. More photos on the link.
http://sakfan.blogspot.com/2010/03/victorinox-sak-collectors-society-2009.html
-
excellent work Chris!
-
Ebony and Ivory Minichamp Super.
**WOW!! Beautiful... ** your custom Awl/Reamer looks like it was inspired by the Wenger tool design. Nice idea; this is a really great SAK.

I said in another thread I didn't care if Vic dumped all Wenger 65mm models... but I think I should retract that... they should keep the Pocket Tool Chest.+1K. Love this.

-
@chris.customworks said:
Victorinox Spartan & Hunter XT-CS with black ebony sclaes and red fiber as setBeautiful!

What exact kind of material are the red fiber layers?

-
@ Sidhartha & Marius: Thank you for your positive feedback!
@ Marius: The red liners are made of vulcanized fiber. This fiber is a fibrous paper impregnated with an epoxy material so the fiber becomes very durable.
-
ah, so it could be made like paper micarta using coloured art paper...
-
-
Droolin' so hard over many of these!
Quick question for the modders/craftsmen - If one does not care about retaining the toothpick/tweezers/pen, can wood scales be thinner than the standard plastic ones by a millimeter or two on each side?
I am curious as to whether or not it is possible to make a wood scaled Compact as thin as, say, a Alox Pioneer...
Thanks!

-
Various wood types may have a stronger cell structure than other wood types, whereas Walnut or Desert Ironwood would be stronger than an Oak or fruit trees.
Have made wood scales by hand that had the channels for tweezers, toothpick, pen, & pin. However once material is removed for the channels the structural integrity is compromised in those areas. If a sharp blow was to hit the area for a pen, or the knife were to drop, more than likely is would fracture or break if the scale was thin.

See a lot of the wooden scale makers prefer to not go through the trouble of cutting the channels. They also pin/peen there scales on. Victorinox and Wenger did not even put tweezer and toothpick channels on their wooden scales, probably due to no fast consistent way to do so.
Peening/pinning is an ideal method to hold scales on as there would not be glue, moisture, and longevity issues. But there is a feller here in MTO that had sent me a set of scales that was routed on the outer edges and laser cut underneath. That worked out great for the toothpick and tweezers. Pin could have been added, but it would have to be a tight fit.
Then also have to contend with oil or varnish protectant & finishing build-up - as compared to plastic or other materials that do not require preserving the wood.The pen channel would be the hardest to accommodate as that scale alone needs to be thicker, as there is no other way to strengthen the wood for a 2mm wide pen. Taking the wood down to 1mm would make the wood fragile on that one area, leaving a 3mm wide scale overall.

The least successful scale with a pen channel was 4mm thick overall. Had a 3mm and it fractured during the finishing stages. Had also tried running a pen down the middle with disastrous results. I was not a happy person that night, but 4mm by hand is the bare minimum in my opinion. If the wood was stronger, and the channeling done slowly by machine or laser, maybe 3mm - but that's not much organic material there and a crack is likely to occur over time.
I EDC an Australian Silky Oak scaled Climber, but the scales are thicker and rounder. Sets well in my pocket. Have a part of Australia in my pocket. :D
-
-
My latest mod: Victorinox Spartan with x-cut ziricote scales



-
Fabulous grain :D
-
Thanks! :)
-
@Xelkos said:
The pen channel would be the hardest to accommodate as that scale alone needs to be thicker, as there is no other way to strengthen the wood for a 2mm wide pen. Taking the wood down to 1mm would make the wood fragile on that one area, leaving a 3mm wide scale overall.The least successful scale with a pen channel was 4mm thick overall.
@Xelkos:
4mm for a wooden pen scale is very thick. Doing it the normal way, you can reach 3,3mm quite comfortable. Cutting some space in the liner you easily reach 3mm.
But I have to admit, that I'm using ebony in this particular case. It's an excellent wood for that job.

-
Another SAK-mod with a beautiful piece of wood: Amboina Spartan



:)
-
Just curious what kind of finish you guys are using on your wood.
I've always used polyurethane, just wondering what the advantages of different finishes are... mineral oil, linseed, waxes, etc...
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



