Surge Owners Club
-
I cannot wait the new Surge, but I have a questions to all MUT and ST300 users.
What are your impressions regarding new plier head? Replaceable cutters are obvious advantage but how obout strenght? I hate the flex in my current Surge when you are trying to bend something. Are they much bigger/hard to work in small spaces?Any thoughts would be nice.
-
@BigMatt said:
I cannot wait the new Surge, but I have a questions to all MUT and ST300 users.
What are your impressions regarding new plier head? Replaceable cutters are obvious advantage but how obout strenght?** I hate the flex in my current Surge when you are trying to bend something.** Are they much bigger/hard to work in small spaces?Any thoughts would be nice.
I don't own a Surge myself, but I guess any flex would be in the handles, not in the plier head...
-
Plier head itself. It's longer than fe Charge so when you grab something thick that's sticking out and try to bend it to the side the "prongs" of the pliers start to offset.
Or when you reach for a nut from the top with plier tips and try to tighten it they will flex and slip.
I'm not saying Surge is soft, it happends when you really lean on it with both hands. -
Sounds like you are putting a lot of rotational force on the plier head, which they aren't designed for, particularly needle-nose pliers (and you run the risk of tweaking the joint or breaking the head altogether, they are only cast, not forged).
Would a blunt-nose conversion (milling off the narrow ends) make them better suited to the way you use them ? It would increase the strength in two ways - more metal at the working point, plus significantly less leverage.
-
Wooo guys, I'm not complaining or anything. When things start to flex you know you have reached the limit.
Just wondering how "our strongest pliers we have produced" compare to the surge. -

The twins. -
I've seen more than a few MTO people holding off on sending in defunct Surge models to LM for warranty - hoping to get the new one in return. Thought I'd just copy this exchange from LM emailed a couple of months ago [she offered up the info on the warranty issue because I'd raised the question of just getting the new blade exchanger - i.e.]:
">Eventually, for warranty purposes, the new version Surge will replace any first
generation Surge sent in for warranty reasons. Since our warranty dept. is not
set up to process any monies we do not currently offer any variations or upgrades.These same type of questions arose when we did a variation of the Wave tool back
in 2004. So I am confident that the same policy will be followed with the Surge
variation. Once our current stock of Surge is depleted then the new version will
be used to exchange – but only for warranty purposes."Eh - key being "once our current stock of Surge is depleted..."
Und that is why I'll be buying a new one, yes? >:D
-
That's why I have just replaced my Surge this week.
Since the first news of a new surge my impulse was to sell/get rid of/clean up my Leatherman collection and get ready for that one perfect for me Surge II. But after a week without nothing on my belt I cooled down and realized that I have two choices:
-nothing for 6 months
-not so perfect currently available modelSo I bought myself a surge (they slowly start to go cheap, got mine for 70 pounds), even managed to brake it and get a replacement.
Use what you got as you always do and upgrade when new version comes out. I'll keep it as a backup or gift, also thinking about YT comparison video.One more thing to consider. First batch or two might have some issues and QC problems. Will see.
Not to mention the moral factor of warranty abuse... -

The twins.I don't see evidence of a hold-down on the blade exchanger there, so - safe to assume you don't have the new one yet...o' connected one??
Jes a question... :D
You must have missed my thread in the mod squad :D
-
You mean this thread:
@baja820 said:
Surge. wait. Scratch that.Surge 300

Jeez; ya' make me look for it and all I got was this picture postcard perfect photo of your work. That's it?! :D
Very nice work, actually. Do you like it better now modded with the ST200 plier head.
Well, [sigh] I guess the rest of us won't have TOO long to wait now... >:(
-
This one.
</topic/44999Thanks for the complements!
I love the surge with the 300 jaws. I can't imagine it any other way. -
@kkokkolis said:
I just bought some Bosch compatible jigsaw blades. As already mentioned by others, they are almost half compared to the Leatherman saws. Can anyone explain his solution for minimizing blade play? Pictures are much welcomed!
Thanks.@zoidberg said:
Heat shrink. Works great for me. Sorry, was gonna take some pics for you today but forgot.Done in a rush but you should be able to get the idea.
-
I bought a set of generic blades and tried them. They are good for saving the included ones, but they aren't really faster than them. So, I decided to buy 3 genuine Bosch blades for fast cutting of
- Metal
- Plastic
- Wood
Could somebody please recomend the specific product numbers for genuine Bosch jigsaw blades?
-
T123X for metal and T101B for wood. Too long for the tool to close but as loong as the sheath/that little sleeve can take.
Always buy blades that cut on the pull stroke and not too aggresive, your hand have much less power than a jigsaw.PS. Metal blade is just perfect for plastic and I havent found any ceramic blad that would actually work, so after a lot of testing I came down to a file in the tool and two of each mentioned blades in the sheath. Hope that helps.
-
Thanks! You suggest these:

Specifications: T123X
Type Progressor for Metal
Teeth Per Inch 10-24 progressive
Overall Length 4"
Type of Cut Fast cuts and long life
Quantity 5
Application Thin metal, pipes and metal profiles, sheet metal up to 8 gauge, metal 5/64"-3/8", stainless steel 1/16"-1/8", non-ferrous metal 5/64"-3/4", plastics 1/16"-1-1/4", fiberglass 3/64"-3/4"
Tooth Design Side set and ground
Material High Speed Steel
Working Length 3"
Blade Thickness 0.04"
Blade Height 0.34"
*Note If cutting metal, use cutting oil to cool blade. Use only with GCFI-protected outlets or adapters
Specifications: T101B 5 Pieces 4 In. 10 Variable Gullet TPI Clean for Wood T-Shank Jig Saw Blades
Type Clean for Wood
Teeth Per Inch 10 variable gullet
Overall Length 4"
Application Hard/soft woods, plastics, OSB, plywood, laminated particle board 3/16"-1-1/4"
Type of Cut Straight, fine cuts
Quantity 5
Tooth Design Ground teeth and taper ground back
Material High Carbon Steel
Working Length 3"
Blade Thickness 0.06"
Blade Height 0.28" -
People will do anything to make their Surge lighter! :ahhh
:D
Interesting looking mod. Got any pictures how you made it?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login








