Blast owners club
-
-
Thread necro!! Still haven't seen pics Joe!
-
I have a Blast, but I can't get any pics right now as I keep it in one of our vehicles. It was actually my first multitool, and I remember the excitement when I got it in the mail. From that point on I was hooked and over the course of the next few months purchased a few more Leathermans. For the box body, tools on the inside design, I actually prefer the Rebar, but the Blast is right up there. I will have to try to retrieve it from the vehicle for some pics at some point. Definitely a great MT and the one that started it all for me :D
-
I can't say it was my first. Technically my first was a Gerber pinchyourpalm special, then a PST that got stolen, then my trusty old sideclip. I stopped carrying the sideclip for years and in 2008 I decided I wanted a Blast and bought one from Walmart after much deliberation over the choice between Blast, Wave, and Core. I fell in love with it immediately. I carried that blast for two years and then broke the medium screwdriver blade repairing an old wooden driver for a friend. I was heartbroken. Checking into LM's website spawned my journey into MT's and my joining this site. I have always had a Blast since then and it has always been my stalwart companion even after carrying so many other models. I now have my latest blast in my EDC bag, because out of all my tools I know that no matter what I am comfortable carrying the Blast in any situation.
-
I drove the vehicle in which the Blast resides to work today, so I took the Blast out and have it sitting here at my desk at work so that I'll have it with me when I get home tonight. Then I should be able to take some pics of my old buddy :) I haven't carried it in forever, but I've been playing with it off and on today and am remembering how I felt when I first opened it and got my hands on it. Holding it again has also reminded me of one of the reasons I prefer the Rebar, and that's the slimmer body. The Blast is rather thick for the tools you get, but I know that is due to the Zytel inserts. Due to its thicker body though, it makes for a decent light duty hammer :)
It's funny because, thinking back, I hadn't discovered Leatherman's website until after I got the Blast. I just relied on Amazon searches for various Leathermans. The first time I went to the site, the Rebar was advertised on the main menu, but it wasn't out yet. Had I been a little more patient and thought to look on Leatherman's site, I may have ended up waiting and getting the Rebar. However, I know me and my lack of patience when it comes to getting a new toy, and I doubt I would have waited long, especially considering the Rebar wasn't really available until about 3 months after I got the Blast.
Oh well, I don't regret the Blast. It actually has all you probably would really need since it has scissors, and the Rebar does not. Neither have the diamond file, which is too bad. It even has the fine screwdrivers, which would seem out of place in the Rebar. The Rebar is more of a trades type user with the awl and serrated blade in place of the scissors and fine screwdriver bit, but I think the Blast was an attempt at a well rounded, "basics covered" type of MT. Sort of a cross between the trades and urban types

Sorry for the long post, I got a little long winded there
I will try to post some pics tonight. -
Nice post! Good insight on the blast.
I love the blast personally, I carried mine today. I haven't carried a Blast in a while and it was nice to get all the weight of my ST off my belt.
I have always thought the Blast was a perfect EDC tool that had enough "just in case" features to take care of the unexpected. I was pretty disappointed with the Rebar though. While I do like it and will definitely get another one, the thin blade stock worries me, along with the weird shaped file and tiny regular plier gripping area. I'm not so worried about scissors, as I usually have a SAK on me anyway, but I do agree that the mini bit driver is really nice to have on the Blast.
-
@Mercury said:
Nice post! Good insight on the blast.I love the blast personally, I carried mine today. I haven't carried a Blast in a while and it was nice to get all the weight of my ST off my belt.
I have always thought the Blast was a perfect EDC tool that had enough "just in case" features to take care of the unexpected. I was pretty disappointed with the Rebar though. While I do like it and will definitely get another one, the thin blade stock worries me, along with the weird shaped file and tiny regular plier gripping area. I'm not so worried about scissors, as I usually have a SAK on me anyway, but I do agree that the mini bit driver is really nice to have on the Blast.
Thanks

I agree there, the Blast is a good all-arounder as I said before. I also agree about the thinner blades on the Rebar. I remember noticing that myself when I first got it. The Blast's blade is beefy, and I had forgotten just how beefy it is until I checked it out again today. Good point about the pliers, but for me, I don't really use them that way. I use the pliers for finer type work normally, plus I like the replaceable wire cutters, which are quite handy. Same here with the scissors as I too carry a SAK to cover those. Still, the Blast and Rebar are both awesome imo, but I like the Rebar a little better. To each his own though ;) Pics shortly I hope, once the baby is down for the count :P
-
Here are my pics.
Sent from my XT901 using Tapatalk 2




-
Nice pics!! I see you have the newer version with the beefier locks.
-
Oh I do? I didn't know there were different locks. Mine is dated 1011. I've been having fun playing with it the last couple hours. Thanks to our discussion, I'm actually considering giving it a slot in my weekly rotation. That would give me 6 weeks worth of rotation. I normally keep the Blast in one vehicle and the Wave in the other, but I'm thinking if I want to give the Blast a slot in the rotation, I will put my Charge AL into a vehicle. I'm telling you, it never ends with me, but at least I'm developing a system to my EDC per week. Of course, this system only covers what I carry for a MT in my back pocket, not what items I carry in my front pocket. That only varies among a few select items at this point though. But I digress ::) Thanks for bringing the Blast back into my EDC life

-
@Monrogue said:
Oh I do? I didn't know there were different locks. Mine is dated 1011. I've been having fun playing with it the last couple hours. Thanks to our discussion, I'm actually considering giving it a slot in my weekly rotation. That would give me 6 weeks worth of rotation. I normally keep the Blast in one vehicle and the Wave in the other, but I'm thinking if I want to give the Blast a slot in the rotation, I will put my Charge AL into a vehicle. I'm telling you, it never ends with me, but at least I'm developing a system to my EDC per week. Of course, this system only covers what I carry for a MT in my back pocket, not what items I carry in my front pocket. That only varies among a few select items at this point though. But I digress ::) Thanks for bringing the Blast back into my EDC life
No prob!!
Yea, your locks are the newer ones. You can tell most easily by the handle cutouts that mirror those found on the ST300. Another way to tell is that the posts that hold the lock levers into the handles are much larger than older models. The lever thumb pad is not quite as wide as the handle on older models, whereas the newer ones run the full width of the handle.
-
I got one of each. :D Old style and new style.
Didn´t like the zytel parts at first but have no problem with now.

-
I think I like the old style locks better actually. They're less intrusive on the handle aesthetics/ruler. I'm assuming there must have been a functionality issue if they were changed to the wider style we have now?
-

This Blast was the first LM I ever bought new.
In 2004 a coworker sold me his Kick and I was so impressed with it I went out to Home Depot to get another and I ended up with this Blast.I am a carpenter so this usually is not my first line tool but I always like to carry a MT and the Blast has helped me out numerous times.
Just recently I was in a very tight space at the Philly auto show that took me about 5 minutes to crawl into and I found out I had to cut some 1/4" shims and I only had my Blast on me cause it was too tight for my tool belt.
So after a few saw cuts and scoring with the blade I had the plywood cut and all was well.Over the years I have also used a Wave, Kick and just got a Rebar but I am sure I will always have a place for the Blast in my toolset.
Sent from my fancy work phone.
-
i love my blast. ill have to post pics here at some point. I got a ss blast as a gift for my dad a few years back and he liked it so much that he got me a blast (knowing that i have a lot of leatherman's and knowing i didn't have a blast) in camo and with my name engraved on the blade.
I've used it a few times but i don't want to damage it because it's really important to me and holds a lot of sentimental value. i think its going to be the only one i have that's not a user.
ill have to get another one to use lol

-
I have a couple of Blasts. Only one I have a pic of is my modded Blaster (ReBlast? BlastBar? never could settle on a name). The other one I have is engraved with my name and wedding date. I gave all of my groomsmen an engraved Blast as gifts.
-
I'll jump on this club, the blast is my favorite tool when using drivers, the zytel is nice and rounded at the end of the handles and is super comfortable especially if you have prolong use.


Sak's rule ! -
I also have a Blast. I always wondered when Leatherman would use zytel in their products. Love the tools and comfortable handles. Mine is engraved as well. I wrote a review on it in another forum several years ago. I think it is one of Tim's best tools. Thanks for the topic!
Billyboy -
I am now a member of the Blast owners club!!

-
@Metropolicity said:
I am not one for sheaths mostly because they are BULKY....I can not be the only person who saw this and was like huh what?!

You guys are a very very bad influence. Never really thought about getting a Blast until tonite.

Is there a pocket clip for the Blast? Just seems to have a great selection of tools I would use a lot but is stuck with the ever so stupid mini driver.
What is up with the mini driver? They must have a kick smurf lobby or something.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login