Appreciation for the Explorer
-
@Heinz Doofenshmirtz said:
@Heinz Doofenshmirtz said:
I was thinking a Yeoman with a saw would be pretty cool. Still not sure about doing the mod though.
I honestly don't need the Woodsman's tool layout; a saw is pretty much useless to me for EDC.
However, an Explorer with a pliers layer would be a LOT more useful for me personally, or even a Yeoman Mechanic (Yeoman with pliers).
I am actually thinking that whenever I can manage to get my Yeoman made from my Compact and Explorer, I may want to add a metal saw/file to it. The only problem with that is the fact that it will make it the same thickness as the Explorer, which I think is just a bit too thick for my liking. In that case, I would have to sacrifice a layer. I am thinking it would have to be the scissors, but I'm assuming that would mean I would lose the hook w/nail file on it (although that would be fine technically since I would have the full size file added anyway). So that would make the tool layers as follows: knife with combo opener, mag/Phillips and metal file. I know I would have the corkscrew as a backspring tool, but I don't know what else would be left. On the Explorer, the mag/Phillips layer has no backspring tool, and I don't know if the metal file allows one. I would hope to have the awl there.
You'd lose the awl/reamer by removing the openers layer for the Yeoman, so it wouldn't be there to lose in the first place if making a Yeoman with a file.
I agree that four layers would be a bit much for pocket carry though, so it really depends on what tools you need/want most.
I've been seriously thinking about making a Cyber Compact actually. Not having the mag-glass would be a drag, but the bit driver layer would more than make up for the loss of the inline phillips, as well as the large and small flathead drivers on the ends of the openers. It'd be three layers, albeit a bit fat for three layers because of the bit driver layer, but it would be as close to a perfect pocket SAK for my needs for EDC as I could get.
Do you know if the file layer allows for a backspring tool? That Cyber Compact sounds cool

-
@Monrogue said:
Do you know if the file layer allows for a backspring tool? That Cyber Compact sounds cool
Only a few models come with a backside tool on the file layer, and I think one of them is the Ranger/Craftsman. I think it's the mini-chisel tool that comes on the backside of the file, but not sure though, as I haven't had a Ranger in many years. To get what you want, you'd have to get one of those as a donor to get a spring that allows a backside tool for the file, and you might be able to make a reamer fit in that spot, but you'd have to ask Steven or Syph to find out for sure.
-
@Heinz Doofenshmirtz said:
Do you know if the file layer allows for a backspring tool? That Cyber Compact sounds cool

Only a few models come with a backside tool on the file layer, and I think one of them is the Ranger/Craftsman. I think it's the mini-chisel tool that comes on the backside of the file, but not sure though, as I haven't had a Ranger in many years. To get what you want, you'd have to get one of those as a donor to get a spring that allows a backside tool for the file, and you might be able to make a reamer fit in that spot, but you'd have to ask Steven or Syph to find out for sure.
I have been considering getting a Mountaineer, but that's also a 4-layer SAK. Also, it would eventually end up being sacrificed along with the Compact and Explorer to create what I want, so I'm not sure if it's worth buying one as opposed to having Syph supply one for a few extra bucks (or maybe more-not sure what he would charge for a file, or if he would happen to have one). I will probably ask him about that at some point soon. Thanks for all your input Heinz, you've been very helpful

-
I just checked out a pic of the Mountaineer, and it appears that the file layer has no backspring tool. The hook is with the scissors, corkscrew with the knives and awl with the openers. That complicates things as I don't want there to be only the one backspring tool (corkscrew). I believe Syph can work his magic to fix that, but not without adding more expense. I will check with him anyway, but I can't really afford to spend too much on this. For him to make me the Yeoman out of the Compact and Explorer wasn't going to be too bad, but I know with each added part and extra time for his valuable skills, it's going to add up and quickly become less affordable (especially with a wife watching how much I would spend :o ;))
-
I'd been missing my Explorer a bit, so I figured I'd give it another try with the pocket clip in my work pants (dressier pants). It had originally seemed like the clip was too long to work in these type of pants that I wear to work as the Explorer reached the bottom of the pocket. However, it just barely touches the bottom, and it rides just fine so far from what I can tell. Perhaps the issue was with whatever else I had in the pocket at the time. It does fine with my Pioneer sitting in the change pocket. The clip really does make a big difference with how noticeable a 4 layer SAK is in the pocket. So anyway, just appreciating my Explorer some more since it was in need of some attention ;)
-
HAHA that's a great video! I agree the explorer is a great all round SAK, but I still like pliers too... It's hard to have it all!
-
Alas, my Explorer is no more. I sacrificed it (for the mag/phillips layer) along with my Compact for a modding job, but it will be worth it :D
-
Got my Explorer in my pocket today actually.

-
@jerseydevil said:
Got my Explorer in my pocket today actually.
Good man
Even though I sacrificed mine, I'm happy with what I have coming as a result. I still think the Explorer is one of the best, if not the best, all-arounder SAK that is still in production 
-
Great Explorers never die...they just become Yeomen!
-
Great Explorers never die...they just become Yeomen!
What is the difference between a standard Explorer and a Yeoman?
The Yeoman is basically a trimmed down Explorer plus with the opener layer removed and the small blade replaced with a combo opener tool. It's only 3 layers while the Explorer is 4. Oh and there is a nailfile made onto the hook in the Yeoman.
-
The Yeoman does look like a better option for me, as I have found the 4 layer Explorer too thick. That's why the Climber is my choice, but I do like the pen. Where can I buy the Yeoman? What is the actual model and who makes them? Sorry for my ignorance.
-
@Aped38 said:
The Yeoman does look like a better option for me, as I have found the 4 layer Explorer too thick. That's why the Climber is my choice, but I do like the pen. Where can I buy the Yeoman? What is the actual model and who makes them? Sorry for my ignorance.Not a problem, that's what we do around here :) This is a very educational place to be
I would never have know about the Yeoman if not for joining up here. They are no longer in production by Victorinox and are not always readily available. Swiss Bianco does them, and currently has them for sale as far as I know. Someone provided me with a link recently, but unfortunately I cannot provide it from work. I will try to find the post containing it for you. They are a bit pricey though. You may also find one on Ebay occasionally. The other option is to have one created for you by one of our resident modders. -
Aped38, here is the link:
http://www.swissbianco.com/products/sak/foldingknives/yeoman-mechanic-sak-detail.htmlHopefully it works. I think it goes to the Yeoman Mechanic (has pliers), but you should be able to get right to the regular Yeoman from there. I just looked and it's the very last one on the last page, the Yeoman Sapphire.
-
-
Good thread bump. I said it elsewhere but I'll say it again here; I'm really liking my new Explorer.
I've also managed to snag one with the new style glass magnifier, though I wasn't bothered by the plastic lensed one TBH. -
Glad you're getting along well with your Explorer Gareth :) That's what I wanted originally, the new style glass one, but I saw this one and had the spare cash to grab it, so I did just that. This is the first SAK I've gotten that I cleaned up nice and swapped scales, and I'm pleased with the results
The Explorer really is one of the best stock SAKs, imho of course.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login





