Different Swisstool plier heads , the truth
-
Scrappy - you are right about the latest photos of the skinnier plier - they do not have shield stamps on them. Someone previously mentioned that a recently purchased wider plier version was also missing the shield stamp on the wider plier. Some here assumed Vic made a change making both tools (full sized and Spirit) without shield stamps. Time will tell.
Gareth - the photo is old - You can barely make out the shield stamp on the handles in FRONT of the "Victorinox" stamp. The owner probably rubbed off the red paint as some owners are known for doing. Some owners here have done so to theirs.
Tosh - most full size Swisstools do have a small amount of play in the plier pivot - all the ones I've looked at have play - my own and also in various stores. Not a bad thing - in that the mechanism has smoothness to it, unlike other brands who don't have play but the mechanism might be a bit tight and rough. But like you, I would probably prefer less play and more tightness.
-
-
Mine looks like that too. I am sure that is the most recent. The photos showing the smaller plier head are from prototypes and are not production models. One way to tell that is by looking at the corkscrew adapter. If the photo has a circle it is not a production model. If it has a squiggly triangle to connect the corkscrew, it is a production model.
I have said this before. I spoke with a current dealer and this plier head is the current model being shipped to dealers. -
Scrappy the models with smaller plier heads and round corkscrew hole WERE production models and not prototypes , there are many of these models in circulation , I have one that has no hard wire notch in the cutters which makes it a really early one.
I've always preferred the 98 plier head, it opens and closes with more resistance.
Dunc
-
I am sorry Dunc. I didn't mean to say they were never production models. I meant the recent photos of the old plier with the new handles and sheepsfoot blade are not a production model. They are just stock photos. The current production model looks just like the pic wave180 shared.
Older models pre 2002 did use the smaller plier. I carry one as an edc often. Thanks for helping clarify my statement. -
Sorry Scrappy I miss understood you , havnt had my coffee yet

-
@scrappy said:
Mine looks like that too. I am sure that is the most recent. The photos showing the smaller plier head are from prototypes and are not production models. One way to tell that is by looking at the corkscrew adapter. If the photo has a circle it is not a production model. If it has a squiggly triangle to connect the corkscrew, it is a production model.
I have said this before. I spoke with a current dealer and this plier head is the current model being shipped to dealers.You just made me a very happy man. That's awesome news that the New Swisstool with the sheepsfoot serrated blade still has the larger pliers

-
I just received a brand new silver SwissTool that looks as the one below with one more change - there is no shield embossed on the pliers head anymore. The pliers head is blank (although nicely machined) on both sides. Standard SwissTool, sheep foot serrated blade as the one in the pic. Very nicely built otherwise, no blade/tools play (usually associated with the SwissTools), thight and smooth at the same time.
Few weeks ago I got a BO variant of the same SwissTool standard model from Tim (Tim, if you read this:
!) and that one looks exactly as the one in this pic, the embossed shield included, just in all black. -
Swiss Tool Black plier heads with Blasting Cap Crimper

-
Very nice Melvin
And congrats, those with the cap crimper are not seen very often. :) -
@Melvin Sjardinal said:
Swiss Tool Black plier heads with Blasting Cap CrimperOhh,nice one Melvin.. 8) 8)
-
Does anyone have a Victorinox catalog pic of the 1998 Victorinox SwissTool X set which also included screwdriver bits, the "L" shaped bit drive bar, and nylon case that holds all?
-
@Marius said:
I just received a brand new silver SwissTool that looks as the one below with one more change - there is no shield embossed on the pliers head anymore. The pliers head is blank (although nicely machined) on both sides. Standard SwissTool, sheep foot serrated blade as the one in the pic. Very nicely built otherwise, no blade/tools play (usually associated with the SwissTools), thight and smooth at the same time.I recently bought a new Swisstool Spirit RT "Road Tour Edition", and then about a week later, I bought two more from a different seller. The first one I received has the little Vic logo etched on the pliers head, but the other two that I received do not have the logo. Instead they'er just machined smooth. I wonder how many of the Spirit RTs have the etched Vic logo on the pliers head as opposed to without the etched logo?
-
Here is a pic of the three Spirit RTs that displays the one with the small Vic logo etched or engraved on the plier head, and the other two without the logo.

-
-
@wave180 said:
This might clarify some things. This is my brand new Swiss Tool, no more red paint, plier head is the same as the 05 version with a cross and shield stamp. Also, this is the regular Swiss Tool with sheep foot style serrated blade.I too have this one with the sheepfoot style serrated blade, no red on handles but NO shield stamp on pliers head!
@burnside - I too have two of the RS and neither have any shield stamp on them. Both smooth!
I also have a Swisstool with the scissors that has a shield and Victorinox stamp on one side. It also appears that the pliers head is not as stubby as the one with the sheeps foot serrated blade.
Too many variations and I wish they would stop. Just make them one way. Any idea of production dates for the ones I have? :D
-
I can't compare them anymore because I sent the two RTs with smooth plier heads and no logo to Thunderpants this afternoon, but I just noticed in the photo that the one with the logo on the plier head looks a little wider and less slim than the other two. I wish I could compare them still, but like I said, it's too late for that.

-
@burnside said:
I can't compare them anymore because I sent the two RTs with smooth plier heads and no logo to Thunderpants this afternoon, but I just noticed in the photo that the one with the logo on the plier head looks a little wider and less slim than the other two. I wish I could compare them still, but like I said, it's too late for that.
I noticed that too in the pic but thought maybe it was just an illusion! LOL
-
Great thread!!
-AdmSlc
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

