30 Day Coghlan's Campers Tool Challenge!
-
First, this thread belongs to the world. Hello, world!
Second, we have an interesting development, can-wise:

Clockwise from left: Diet Dr. Pepper, Coke Zero, and Diet Crush.Both Dr. Pepper and Crush are doing exactly what you described, while Coke Zero is not. My earlier failures were with Coke Zero and Cherry NOS. If you look closely at the picture, you might be able to see the shallower angle of the can top immediately inside the lip of the Crush and Dr. Pepper cans. Since these two are both Pepsi products, while Coke Zero and NOS are both Coke products, I think we can assume it depends entirely on the plant or line the bottles are manufactured in/on. It has nothing to do with Campy's abilities after all.
Problem solved! Go team!
Anyway, back on topic: the large slot screwdriver helped me hold a tire off the rim so I could use another tool to slip off the rest of the bead. Easy-peasy, lemon-squeezy.
-
Haha we are such thorough people here. Now I know the difference between the rims of coke and pepsi cans.
-
I have had that experience with aluminum cans before. I think it is more to do with it tearing due to the strain put on it whilst you are using the can opener, (It is a can opener after all) kind of like how it is easier to tear paper towel semi-neatly along the perforations. Because some of he work has been done already.
-
It's Day 28, and it's a very merry Grouting Day! Because of the bewildering variety of seated, standing, and squatting positions an entire day of grouting entails, the only thing in any of my pockets was Campy. Was Campy up to the challenge of doing...well...everything?
We were off to a good start with this rigid insulation, which made the mistake of being in front of the column base I was after.

Wait, is that the...no. He wouldn't use that again!Since the nearest saw was in my satchel, which was uncharacteristically far away, I decided to try the fish scaler. After all, the tool is shaped like one of those dull, saw-like pumpkin carving knives you give to your kids before you trust them with anything sharper than a boiled egg. It wasn't as clean as a saw cut, but it did the trick, and I used it like this for the rest of the day. This is, of course, the second time in the history of the entire universe that a fish scaler has been useful for anything.
Next up was a new water scooping cup...thingy. As per our earlier discussion, I hunted down a Pepsi can, which was easy to find, since someone is littering them around the site with alarming frequency. Seriously, someone out there must be drinking 30 litres of cola a day. Anyway, this ought to give some of you a thrill:

Hey, there's a multitool in my Pepsi! I demand a refund!As you can see in this picture, even before morning coffee Campy was rife with grout dust. Good news: it washed right off, and everything's shiny again.
Finally, here are some of the scarier things Campy had to do today. The first Scary Thing was batoning. This is something I usually don't do. I've done this while firestarting in the woods, because sometimes you stupidly forget your axe. My tamping stick was twice as thick as I needed for two different columns today, so I needed to thin it up:

Bang! Bang! Bang! is the sound of my margin trowel's handle mercilessly smashing down on the end of Campy's blade.
I had to use an actual saw for this part, so a big hand for the Outrider! Yaaaaaaaaaay!So, batoning worked out. I wasn't sure how handily Campy's blade would survive it, but I don't see any damage. Good thing your blade doesn't have to be too sharp for this one.
Finally, I needed to flatten the point on the back end of my tamping stick (the thick part that I kept) so I could tamp in an odd corner. Pliers, I choose you!
Then I cleaned it up a bit with the knife blade, which was only mildly terrifying without any kind of locking mechanism and an edge as sharp as a $30 suit:

dontfoldupdontfoldupdontfoldup...And thus ended Day 28!
-
Go ! Campy Go ! you good thing !!!!!

-
Wow! This thing is the Energizer bunny of cheap multis!
-
Yeah campy!
-
I admit readily that over the first couple of weeks, I didn't think Campy was going to make it. But, as it turns out, where it's really shining is in the really brutal stuff that no tool should have to face. It can't do fine work for anything, but it can chop survey stakes in half. Lengthwise. It's surprising me exactly the same way Coghlan the Army Knife did.
-
Well if this tool can survive this...any tool made out there can.
-
Well done Campy!
Superb reading as always Jothra. 
-
Thanks, all!
Now, I know this is only a 30 day challenge, but I'm going camping and scrambling this weekend, so I'm giving Campy two bonus days. What better way to end it all than on a camping trip?
-
Going camping: Campy's reward for a job... emm... adequately? done. :D
-
@Lynn LeFey said:
Going camping: Campy's reward for a job... emm... adequately? done. :D:D
-
I knew the fish scaler couldn't be completely useless!
Thanks for the great review, I had never heard of that Coglan brand before.
I hope you enjoy your camping time; I could use some right now.
-
Okay, here's your only warning, and it's going to be in Rubric Red:
Near the end of this post, I do something absolutely unthinkable to this tool. Never treat a tool this way. I've done a watered-down, less ridiculous version of this with my Kick and Wave in the (somewhat distant now) past. There is always a better tool for this job. Don't do it.
There. Read on.Day 29 was mostly more of the same at work, with a few familiar chores, and a few new ones. The one familiar thing Campy did over and over is cutting through that rigid insulation.

It's no saw, but it's better than using my teeth. Or someone else's teeth.At this end of the building, several column bases were filled with gravel and dried mud. These had to be cleaned out for the grout, because a hard candy grout coating with a soft chewy mud centre is bad news. My oddly versatile margin trowel could get most of it, but some spots were easier with the longest non-blade tool Campy holds:

The fish scaler again? I'm as surprised as anyone, I swear!The fish scaler is, after all, just a scraping tool, although it's normally for scraping an animal much less gritty than muddy concrete.
Wind? Well, I didn't realize it was in the forecast, but you work with what you can get. Why is this important? Because the door of the big job trailer was flapping ungracefully as it was buffeted by an unrelenting, invisible foe. I had to use some tie wire to make an Open Latch thingy for it.

Hey, the cutters are still good! Also, the lack of hard-wire cutters is still fine with me.I also used the pliers to double up the wire, twist it into a big loop, and twist one end onto a fastener under the trailer, but close enough to loop around the door's closure bar, holding the whole thing safely open. This may not seem important, but you might not think it funny when you suddenly get trapped in a trailer as the wind slams the door shut—with enough force to knock it into a locked position from the outside. Trust me, it's not something you want to do twice.
After wrapping up the last of the grouting, it was time for knocking off more leftover form pins. The problem is that some doofus, thinking he was being clever, had knocked them all flat against the foundation, so I couldn't hit them far enough to break. I couldn't even squeeze the claw of the hammer behind six of these bent pins. I needed something to wedge behind them, like a crappy chisel, or...you know what? Who am I kidding? You've already figured out where I'm going with this.
The faint of heart may wish to look away.

Bang. Bang. Bang. Now you know why I wrote my warning in red.There's a little scarring around the ends of the handles, because framing hammers have knurled striking faces. The plier/handle pivots loosened a bit, but were good as new after a little peening. Other than that, no new tool damage to report.
Try not to cry too much for Campy. It's in good company now, since my Kick (five years ago) and my Wave (three years ago) did something similar when I needed to peel layers of tin off of different surfaces. Neither of those cases, however, required this much force or this much hammer. This is the one task Campy has performed that I have never really asked of another tool. Ever.
What an end to Day 29!
-
:o
:ahhh
Now that's torture testing. >:D
-
Well campy is no elegant pearl scaled sak but he gets the job done!
-
There are a number of downsides to the design used to make Campy, but the simplicity of it lends itself to being... emmm... 'mistreated' and surviving (mostly) unscathed.
-
:o
I guess this is one of the good reasons to actually buy cheapo MT's.
You can mistreat them like you would not have the heart to do with a pricy one.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
