My small adventure into 58mm SAK modding!
-
That ti minichamp is so nice! Great work Robert
-
What screws are appropriate for the 58mm saks? Are they commonly available? I would love to have a alox rambler, but +B price is a bit high. If it is an easy swap, I might give it a go myself.
Cheers
-
very pretty!! i love the minichamp the best 58mm

-
@papercut said:
What screws are appropriate for the 58mm saks? Are they commonly available? I would love to have a alox rambler, but +B price is a bit high. If it is an easy swap, I might give it a go myself.Cheers
I used 0-80 threaded screws. They are common at hobby stores, but only the knife supply places had them with torx heads. The outer diameter of the screws happens to be exactly the hole size of the Vic parts for 58s. These little tools pivot perfectly fine on threaded rod.
-
I knocked out another brass rambler today. Its really hard to photograph polished metals, but it looks really good in person. It's a nice break to work on the little ones now and then. :D




Cheers!
-
@Syph007 said:
Ok so tonight was prototype night and I came up with something pretty wacky, but with a purpose in mind... :D






So you see that I am bascially making a 58mm version of the wenger pocketgrip! :D Still a prototype and I need to make a clasp to hold the pliers closed but I see no reason why it cant work. I wanted to carry a swiss keychain tool for ages to replace my leatherman P4, but I needed pliers! So this idea was born.

Its funny, I remember thinking it would be really hard to add pliers to an 84.. but doable... I never thought adding them to a 58 was even close to realistic, but then I remembered that doing them fixed mode was an option and I'm very pleased with the concept so far. :D
So, how are you on this one?

-
-
Awesome, totally love the idea of this little chimera

If you feel like selling it or making another one, I'd be biting your hand off for it :ahhh
-
ramblers are great! very nice looking knife shyph

-
I'm back to 58 modding this week. I got really tired of cutting out scales with the jewelers saw so I decided to just use a 1/8 inch bit and my mill. Apparently you can also use a band saw with a fancy ($150) blade to cut Ti, but I dont have that, and Im still learning to use my mill, so I figured might as well.

I just cut channels where I wanted pieces separated, and left 0.015 of material.


Then they just bend and snap apart. Works real nice. :D

I cut 7 scale blanks out in about 25 minutes this way. By hand I can only cut 1 in that amount of time.. so while I wasted a bit more material with a thick cut line.. I dont care! This was worth it for the time savings. :D

-
Anything that saves you time and effort tends to be worth it IMO. ;)
-
Ok so Im starting to see how awesome having a CNC mill would be. I made a roughing fixture to remove as much material around the edges of the parts as I could. And while manually doing this all I could do was picture how cool it would be to have a computer do this nice an accurately.
Even this manual method though is a huge time saver. The mill even with a little 1/4 inch bit chews through Ti like nothing. I can crank as fast as I can and no chatter whatsoever. :D My mind is filled with all kinds of cool things for the future once I CNC this thing. :D
I knocked out a bunch of scales, but now I needed liners. I cut up a sheet I got from Derekmac some time ago. I drilled and tapped holes in some Al square stock for a fixture.







Now that I have scale an liner blanks, what I do is sandwich a stack together and edge finish, then keep them in the same orientation for final assembly. I'll snap pics of that as well.
-
So, how are you on this one?

That one is almost done, I completely rededid it so the plier head is lower down and looks more natural. I made a catch for the pliers from a small Ti piece. Its on the shelf of projects I will get to sooner than later... :D
That one looks very neat!
I know I'm going to regret visiting this forum. I have to restrict my visits to something like once very 3 months.
-
I finished up a brass minichamp last night and took some pics today.






-
Someone's going to be very happy.

-
Some after dinner milling fun.




-
Oh I like that. Finally someone besides me likes t&t with upgraded scales.
-
@tattoosteve99 said:
Oh I like that. Finally someone besides me likes t&t with upgraded scales.Just the one t, I never use the other t :D
That trick only works with Ti. Brass is too weak to remove that much, it needs an extra liner. Im making a keychain Ti Vegabond with tweezer.
Basically a minichamp, minus the stuff that isnt very useful.
-
Love it. Very nearly a perfect keychain tool.
I usually carry an alox minichamp plus LM style PS. If I could get the vagabond tools plus pliers and tweezers I could carry one thing instead of two. Which would be awesome.
-
Looks like you are having fun with the mill! Congrats!
Cheers
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login