The 30 Day Victorinox Huntsman Challenge!
-
@powernoodle said:
I'm nominating this as an MTO Top 10 of 2013 thread.Good idea for a thread. And I second the nomination.

-
Day 6 was harder on me than on Vicky, but it's hard to keep a good Swiss Army Knife down. The first thing we did today was cut some toenails, which Victorinox scissors handle with gusto. No pictures, because it's toenails. You probably know what these look like.
Later I used the hook as a wonky marlinspike to untie a particularly nasty knot in a ratchet strap. No pictures, I'm afraid, because the guys in the lumberyard would have thought I was insane.
To make up for the lack of pictures so far, here's a gem. We attached a plywood form to a column pocket, and wired it to the column so pushing concrete wouldn't blow it out. I couldn't get an actual for real picture, so I whipped up a Fancy Dramatization instead.

This makes me think of The Byrds for some reason.As you spin the screwdriver, nail, rebar cutoff, or (in this case) awl, it twists the wire, tightening it and pulling the wired objects together. Farncy!
In the afternoon, it was time to put 2x4 sidewalk forms across the door openings in the foundation wall, to create a base for the future doors (future doors, like on the Jetsons?). The rigid insulation under the concrete line needed to be cut down at least 4 inches to both accommodate our forms and give me a chance to use the phrase "rigid insulation" for what must be the 500th time in less than a week of forum posts. Here's my saw cutting down one side:

SAK saws are exceptional...ly nerdy. But oh, how I adore them!And here's the knife blade trimming it down a little farther to leth the form fit just a little snugly, instead of Doom Snuggly:
There was a lot of insulation to cut—about 20 feet, all told—and it was all disgustingly dirty. I was pretty sure the blade would need some touching up, and I was right. Therefore, I did some cut tests on paper, both before sharpening, and after quickly swiping each side five times with a mini ceramic rod. I managed to get a picture of a before and after right next to each other. I'm not really a fan of the paper cut test thing (I've cut substantially more plywood than paper with Vicky's main blade, after all), but I thought maybe it would indicate the very small amount of edge cleanup I had to do.

More left: before sharpenatering. Less left: after five strokes per side with a tiny ceramic rod.Stropping helped even more. I just used pants again, because it's really easy.
I'm at an outdoor theatre function tonight, and usually lend a hand backstage (for better or worse? Who's to say?), so maybe we'll have some more adventures. Who knows? Not you yet!
Day 6!
-
Nothing better to honour a tool that beating the crap out of it
Very nice thread -
@Goatlord666 said:
I am yet to meet a huntress named vicky...so +2Count your lucky stars, brah, for you have not met my ex... called Vicky :P
-
Aaandd, on a more serious note.. Great work, Jothra, as an owner of a brand new Huntsman,
I am thrilled to see all these ways it can be used and abused =) -
swiss steel would not fail !
-
Hey! I like all your challenges Jothra, they are very interesting to read.
I gave a Huntsman to the sister of my wife and she is far to do the things you do to it! Cheers
-
These are the kinds of things I especially like to read here on MTO. So far, you've exposed the Huntsman to reasonable tasks which it should be able to handle and it's held up just fine. I wish more people would do challenges like this. Thanks for your time on it
:D -
I'm not sure I've ever seen a friendlier forum.
On topic: no work this weekend! I'll do a Saturday/Sunday update tonight, though.
-
I've used my Huntsman for many things, including construction site work and EDC for about three years. I'm sure it will survive, as long as you don't use it as a hammer or go out of your way to break it.
-
Challenge accepted!
Also: my Outrider handily survived a stint as a hammer last year. No harm, no foul!
-
I'm EDC'ing my Workchamp for the month of Aug - in my jeans pocket! Trying to decide between this or a LM Wave as my daily... My "Sunday Church" tool will be my "hookless" Vic Climber...hate that stupid hook - glad my WC and OR are hookless.
-
Days 7 and 8 were both super slack days for Vicky. There was lots of food prep, which isn't very hard on tools, and miscellaneous grooming (fingernails, mostly).
On Day 7, Vicky's blade pushed a few pieces of wood farther into a fire pit when I was too lazy to get up and walk over to the wood pile for a log to poke things with. Also, we sharpened some sticks with which to make s'mores.
On Day 8, Vicky helped open a new Kobo Aura HD ereader. New-job-and-upcoming-moving-day present! I could probably have opened this package with anything from my fingernails to a cup of Jello, but frankly I just find the small blade on Victorinox knives far too perfect for this kind of thing to use other objects.

I'ma cut you so bad you wish I no cut you so bad!To be honest, throughout the challenge I've been doing far more with this knife than I've been sharing. All of it, however, has been boring stuff like personal grooming and cutting food (mostly at work during lunch), so we already know Victorinox knives can handle these things. We already know Victorinox scissors are excellent for trimming fingernails. We already know the Victorinox blade can slice through food like it's butter (especially if the food is, in fact, butter). I don't want to drown this thread in inane descriptions of boring things that don't remotely test the limits of my Huntsman, but rest assured that they're getting done nonetheless.
Anyway, off to read a good book!
Days 7 and 8!
-
Love the book cover!


-
Cool picture you made there!
-
This is outstanding!
Cool to see the opener actually standing up to use as a pry bar!
-
Fantastic bookcover!

-
-
Books, right? Totally!
Anywhence, Day 9 basically made up for the slow weekend. Granted, much of my work required wire cutters, but there was a lot of knifey-bladey work as well.
Removing the hoarding tarps from the building was easy, but getting the tie wire cut out of the grommets was very time-consuming. In some particularly old, shredded, and tangled pieces of tarp, it was nigh impossible without a little help from your friend and mine:
And another tool:
At one point, I did a stupid thing with my Leatherman Rebar, and managed to wire its jaws shut.
Really.

I've done dumber. Occasionally it involves fire.The corkscrew worked well. After all, it's meant to open things.
At the end of the Tarp-a-Thon, I had to roll up the tarps (the big, insulated kind). Easy! One of them, though, had seen much better days, and I was asked to trim off its entire edge.
And, as a final (and ridiculous) cherry on top of the day, at one point my wire reel (a loaner) had just enough wire left in it to tie absolutely nothing useful. It was time to throw in a new reel! To do this, one turns the reel while holding the bottom layer of the reel in place. Unfortunately for poor Vicky, this reel was jammed but good. My only recourse: enough WD-40 to lubricate Mario Cipollini's hair, face, and torso, and the nearest
hammerwhatever-I-could-get-my-grubby-mitts-on-that-could-be-misused-as-a-makeshift-hammer.Sorry, Vicky.

Action shot! I would have felt dumb if this shot hadn't turned out.Surprisingly, it worked (the second time, after I added enough penetrating hoo-haw to drown a small county), and didn't leave any noticeable marks on Vicky at all!
Now Vicky just needs a go at some finishing nails to prove that Outriders don't have all the fun. Day 9!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




