The 30 Day Victorinox Huntsman Challenge!
-
That is unbelievable!
Go Vicki,go Vicki,go go go!
-
You :ashley:
:D
I think Vicky will need a lot of cocktails in a tropical location after this 30 day trial is over to forget all the horrors. ;)
Looking forward to the next entry into her diary. >:D
-
I don't feel so bad now when I use a hammer on a multi or sak.
Nice write up!sent from Ducttapetech's mobile device
-
Wow, I'm really impressed by how tough these things are proving to be. Especially to survive your torture and abuse ;)
-
@ducttapetech said:
I don't feel so bad now when I use a hammer on a multi or sak.
Nice write up!You should feel bad, and so should I. And thanks!
Day 20 did not, thank goodness, involve using an actual hammer on a Swiss Army Knife. Whew! What it did involve was notching plywood backing to fit it between steel studs. We cut the trenches themselves with a skill saw set to depth, which was easy. Sometimes, however, the notching wasn't 100% thorough. Then it was time for the least popular and most oft-maligned tool to lend another hand:
For thicker hangers-on that the saw didn't get on its first couple of passes, another tool saved the day (or at least some time and some tension headaches).

"I see you've played knifey-spoony before."Some other, non-related (and un-notched) backing needed screwing back into place, though unfortunately, some of it wasn't aligned with the beams anymore. I needed Vicky to offer a tool pointy enough to dig into the wood a bit, but strong enough to pry. I was pretty sure this would be bad for the blades or the awl, so I turned to a surprising alternative.

"Hey Vicky, can it?"
*"Yes it can...*opener.
(Vicky is lousy at punning.)It wasn't the most hardcore day Vicky's had, but we still got a lot a lot done.
Day 21, on the other hand, was almost nothing except opening a few cardboard packages and zip ties. Done!
Lopsided Days 20 and 21, amigos!
-
Sorry, I'm still getting over the trauma of seeing you hit Vicky over the head with a hammer. ;)
Still good reading though. :D
-
Nice workout there, reminds me of demi moore in that seal movie g.i.jane, after all this abuse we can call it G.I.VICKY from now on :D
-
-
I'm really enjoying this thread, as well as the other 30 day challenges. I use my multitools hard, but I draw the line at hitting them with framing hammers.
Thanks and Go Vicky!
-
:o
-
@3rdpig said:
I'm really enjoying this thread, as well as the other 30 day challenges. I use my multitools hard, but I draw the line at hitting them with framing hammers.Thanks and Go Vicky!
Normally precision hammer bombings are a bit more than my tools get, though just about everything else Vicky's done so far is something at least one of my past SAKs has survived.
Anyhey, Day 23 had an odd but not at all strenuous use for a nearly ubiquitous tool, and a possibly surprising but surprisingly possible use for another.
Did the pilot hole get drilled all the through the backing and the beam, or am I going to waste a screw? Wait a second, I can answer the first part of the question without resorting to the second! Thanks, Vicky!

Also, thank you, faithful toothpick! I sure wouldn't want to go in there.Oh, great—I have a huge pile of sixteen-footers on the back of a twelve-foot flat deck. I have flagging, which I need to attach by law, but just tying it never works (it basically always flies off). All I have to attach it with is a #2 Robertson screw. But I don't have any Robertson drivers, and neither does Vicky! How is Vicky going to solve this problem?
In all fairness, I knew this would work, but there are a couple of conditions. The first is that the screw can't be too tight, or the driver just skips out of the hole. The other is that you can't use this trick for too ridiculously many Robertson screws before you wear the driver down just enough to not work with #2 Robertsons anymore (though slot and Phillips screws still work as normal).
Good work, Vicky! Go ahead and take the rest of Day 23 off!
-
Day 24 and all is well! Somehow!
First up: stripping forms (there's a lot of forming and un-forming in the early days of a building). Unfortunately, brute force was only an option for most of the stripping, thanks to a water line coming out of the ground tight to the form. Fortunately, Vicky is versatile, maneuverable, and willing to attack screws outside of the can opener's usual purview:

It was a three-inch Robertson screw, but eventually Vicky won!It would have taken forever if I'd had to do that the whole way, but fortunately the other 20 feet of forms got pounded out with a hammer. Never underestimate the versatility of a good hammer. The only downside is that the form pins (big, hammer-into-the-ground ones, not those little ones Vicky pried earlier this month) all looked like this:

Good luck getting those screws out!I tried a couple of methods for straightening the screws enough for them to fall out, and it was Vicky who offered the most elegant (and, for real, the fastest) solution.

Why don't people like the hook? Man, I love the hook!Thanks, Vic!
The last step in getting forms off was prying out the section that was embedded in over-flowed concrete. I couldn't get my hammer's claws behind it to pry, so I needed to:
[list type=decimal]-
Pry it out with Vicky,
-
Set my hammer, which still wouldn't quite fit, in place, and
-
Pound my hammer in with a sledge hammer while maintaining pressure on Vicky.

To be honest, at this point I've given up even worrying about Vicky's prybar. I'm not even sure what kind of monstrous terror I'd have to unleash to break that thing.When I got home, it was time for some easier but (in my opinion) more important work. I needed to ream out the keychain hole on my cyclometer sensor's battery key so I could get it on a keyring, because loseable things on keychains become less loseable.
Job finished:

I'm not sure Sigma needs to make locking battery compartments, because the resale value of CR-2032s is maybe 0 cents.The key is now in my bike parts tacklebox, and Vicky is back in my pocket. There you have it: Day 24!
Edit—in that last picture, you can see all the scratching on Vicky's front scale. The back is basically the same. I love when SAKs start to look used like that.
-
-
Jothra,
Vicky almost got me on Day 19...
I thought it was going to die on that day, and I worn my 3D glasses just to get ready to mourn it's loss. 8)
In ancient times, Greeks achieved immortality thru glorious death. As Day 30 is getting closer, I can't help but to think--are we going to see Vicky achieves its "immortality" or "live long and prosper"?

Vicky,
If there is one word you could say to this strange world of humans, what is it gonna be? :D
-
I think she might say 1)Ouch!
2)Ba$$$rd
3)S**t,not again! -
I think "oh no, not again" might sum it up quite nicely.
Tool damage today, but you get to wait until I'm home from work to find out what it is!
-
The horror!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login






