The Genus Owners Thread
-
@Kukamunga said:
It really does cut better than any pruner I've ever owned.You gotta swap that blade out for a Felco #2....amazing! Best $15 upgrade you'll do.
I bought mine at Lee Valley.
@Kukamunga said:
I do have a question though. The swiveling handle is a little loosey goosey. When you're using the pruner, it's virtually unnoticeable, but it is loose. I tried getting other washers to either replace or add to the one at the top of the handle, but no luck. Has anyone had this problem and done anything successfully to fix??There is a hex bolt (very small) located on the backside of the handle release button. If its not damaged, heat that sucker up and use a tight fitting hex key. That bolt holds both the button in and the handle.
There is a slight bit of play on mine as well as the recent prototype Genus I bought. Like you said..nothing really to worry about.
-
Hey, thanks Metro; I appreciate your reply. Haven't tried your fix [or the Felco], but will definitely give it a go.
Also - like your idea of the cerakote finish. The handles on mine are somewhat beat up - so, that's not a bad idea at all. Any reason you're not doing it yourself?? I have no clue how crappy it could turn out if I did it myself. Complicated process?
Thanks again.
-
@Kukamunga said:
Hey, thanks Metro; I appreciate your reply. Haven't tried your fix [or the Felco], but will definitely give it a go.Also - like your idea of the cerakote finish. The handles on mine are somewhat beat up - so, that's not a bad idea at all. Any reason you're not doing it yourself?? I have no clue how crappy it could turn out if I did it myself. Complicated process?
Thanks again.
Quite complicated, while I maybe able to do a decent job, sometimes its easier to leave it to the professionals. It first gets shot with 100 grit media to even out the surface and remove any dirt etc, then it gets hit with a HVLP spray of cerakote and Jeff even goes in with an airbrush on those small hard to reach areas. Then it goes into an controlled oven for a predetermined amount of time.
It doesn't SOUND hard but if you saw his shop...it's quite an operation. The media blasting alone is worth the money!
I think black for the handles and acid green for the chassis, but last night I thought maybe I could go with Sentry Grey or something instead of black.
-
Used the Reaper in an atypical fashion. Beerplumber once told me that he used bypass shears to cut tubing for installs. Worked great on this piece of garden hose to extended the suction pipe on our new turtle aquarium.

-
You're going down a slippery slope there, Metro. A GENUS for cutting garden hose...my, my-oh-my...
And - why are you barefoot using your Genus?? Clearly two violations in one shot. Perhaps time for a Genus rescue from your house/shop me thinks...
i haven't checked out your fix yet, but I am still having just busloads of fun pruning. So much so, in fact, that Genus is going on a little roadtrip with me and dog...to 'fix' all of the low-hanging branches-over-sidewalks that peoplez just can't bring themselves to cut. Yeah - watch me!!
-
@Kukamunga said:
You're going down a slippery slope there, Metro. A GENUS for cutting garden hose...my, my-oh-my...And - why are you barefoot using your Genus?? Clearly two violations in one shot. Perhaps time for a Genus rescue from your house/shop me thinks...
i haven't checked out your fix yet, but I am still having just busloads of fun pruning. So much so, in fact, that Genus is going on a little roadtrip with me and dog...to 'fix' all of the low-hanging branches-over-sidewalks that peoplez just can't bring themselves to cut. Yeah - watch me!!
I am INSIDE my house :)
Pruners are pruners, I pruned a hose...so what? :)
Also...I have been doing that exact thing for a bit now...low hanging eye pokers I say.
-
Added the Felco blade to Genus the other day. I have to say, doing the pruning on the dogwalk is much faster and obviously then, much more stealthily covert. You can't even say 'hit and run' - cuz no one even knows I was there. It is AMAZING how little [to none] people prune the overhanging branches on their trees.** Shouldn't we have a National Prune Your Damned Tree Day?? It could coincide with National Talk Like a Pirate Day...
Next up is a sapling growing from an existing tree that is almost totally blocking the PUBLIC sidewalk. Genus saw? Do your stuff! [Insert maniacal laugh here...] >:D
Furthering 'repair' will be a [probably] non-cerakote paint job...as I believe cerakoting is rather expensive. Some kind of paint one of the big box stores tells me is good for anodized aluminum. I'm a little excited!

Anyone with paint ideas for other than cerakote?
-
@Kukamunga said:
Added the Felco blade to Genus the other day. I have to say, doing the pruning on the dogwalk is much faster and obviously then, much more stealthily covert. You can't even say 'hit and run' - cuz no one even knows I was there. It is AMAZING how little [to none] people prune the overhanging branches on their trees. Shouldn't we have a National Prune Your Damned Tree Day?? It could coincide with National Talk Like a Pirate Day...Next up is a sapling growing from an existing tree that is almost totally blocking the PUBLIC sidewalk. Genus saw? Do your stuff! [Insert maniacal laugh here...] >:D
Furthering 'repair' will be a [probably] non-cerakote paint job...as I believe cerakoting is rather expensive. Some kind of paint one of the big box stores tells me is good for anodized aluminum. I'm a little excited!

Anyone with paint ideas for other than cerakote?
I don't trust any other coating besides Cera now. I am going to plasti-dip the non tool handle for a more shock absorbing grip. It also comes in spray can which is much thinner but is just as grippy!
-
I don't trust any other coating besides Cera now. I am going to plasti-dip the non tool handle for a more shock absorbing grip. It also comes in spray can which is much thinner but is just as grippy!
Plasti-dip isn't a bad idea. Hmmm. What, may I ask, are you planning on spending for a cera paint job, then? I'm morbidly curious and somewhat ashamed that I'm thinking of my beloved Genus as simply $$$... :-[
Eh...btw...is there somewhere on the forum et. al. that shows an ultra maroon, such as myself, how to quote - without quoting the entire previous post?? It's like rocket science for pete's sake!****
-
@Kukamunga said:
Eh...btw...is there somewhere on the forum et. al. that shows an ultra maroon, such as myself, how to quote - without quoting the entire previous post?? It's like rocket science for pete's sake!****you mean like this? :)
just hit the "quote" link on the post that you want to quote, then simply delete the text you don't want. as long as you leave the quote blocks in place (the ones surrounded by [] brackets), the quote should show up fine.

btw, I'm
stalkingwatching this thread because I'm trying to join this exclusive club. unfortunately, the last one I saw on ebay went for over $200. :-\ -
@Kukamunga said:
Plasti-dip isn't a bad idea. Hmmm. What, may I ask, are you planning on spending for a cera paint job, then? I'm morbidly curious and somewhat ashamed that I'm thinking of my beloved Genus as simply $$$... :-[I have a friend (Jeff Forbush) who takes care of me. It could be anywhere from $30-70 but it's guaranteed not to fade or tarnish. It's as strong as the substrate so on aluminum it's OK on steel it's just the best.
-
@Breezy12 said:
btw, I'mstalkingwatching this thread because I'm trying to join this exclusive club. unfortunately, the last one I saw on ebay went for over $200. :-\Well, quotes' advice worked just fine - thanks.
Yeah; I got lucky for $85 on eBay. All I did was used a saved search [an option they offer]...which, in turn, sent me an email when something matching went for sale. Best of luck. Don't know if I'd do 'two bills' for even a Genus. Well -- brand new does make a difference.
-
btw, I'm
stalkingwatching this thread because I'm trying to join this exclusive club. unfortunately, the last one I saw on ebay went for over $200. :-\Well, quotes' advice worked just fine - thanks.
Yeah; I got lucky for $85 on eBay. All I did was used a saved search [an option they offer]...which, in turn, sent me an email when something matching went for sale. Best of luck. Don't know if I'd do 'two bills' for even a Genus. Well -- brand new does make a difference.
no problem. :)
I'll keep watching ebay, like I have been. (I also use the saved searches.) this last one that I saw was new-in-package, but still... like you said, I don't think I could justify two bills for a Genus. :-\
The funny thing is, I bought one for my mother as a birthday present a few years ago (when they were still in production), but never bothered to get one for myself.

-
@Agonistes said:
why are all the amazing leatherman pruners discontinued? why?This boggles my mind as well. There are no other quality options out there for multi tool, or folding pruning shears out there.
I don't understand how LM could abandon the investment in the tooling they made for these products...
-
Double post.
-
Went out pruning again today with the dog; a qualified victory. Limited by ability to get up & get going; arrival of the dawn made real covert-like mission untenable. Will try again tomorrow. Guard Duck signing off, sir!
Metro - have you sent yours out for its cerakote...or is pruning season just coming up for you?
Btw, trying to think of a quality name for mine here...with hyper-limited success. Closest I've come is "Mike" - you know - after that fine 80's b-movie, "Volunteers". 'Well, frankly Beth - Mike and I don't like what were hearin'.' I guess you had to see it. Hanks, Candy...Gedde Watanabe - Fake Thailand...Commies, Druglords - come on! :D
Will try a little harder at name for Genus. :'(
-
@Kukamunga said:
Metro - have you sent yours out for its cerakote...or is pruning season just coming up for you?I haven't sent it off yet, I have some slingshots I want to send in and it's fall clean up right now so my Reaper is still reaping the harvest as it may :)
-
Reviving an old thread...
Does anyone know if replacement file/hex keys are available for my Genus? I've taken Metro's advice and picked up a couple of replacement Felco blades.
-
@TK8383 said:
Reviving an old thread...Does anyone know if replacement file/hex keys are available for my Genus? I've taken Metro's advice and picked up a couple of replacement Felco blades.
A few select online shops carry really old stock. I managed to find 2 on Amazon and Breezy helped me ship the whole bundle to me.
They are pretty damn great. I STILL haven't had time to take apart my Reaper and take it into cerakote.
-
reviving this thread because I finally get to join this club!

I actually managed to score TWO Genuses (Genii?) within a couple days of each other -- the first one is NIB, the second is a user. the former went straight into my collection, and the latter needs a little cleaning, but is otherwise in good shape. the saw is slightly bent, but I discovered that the internal blade/saw/Phillips are the same tools as on the Core/ST300. I have some parts from a disassembled Core in my parts stash, so replacing the saw will be a piece of cake.

I was doing some yardwork today, so I installed a new Felco blade on the user Genus and took it outside... where it was promptly stolen by my wife.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login