Why no micro (corkscrew) Phillips?
-
@Cupboard said:
It's Sugru, Al: http://sugru.com/I think I'd prefer tinned metal though.
Cheers Tom. You can tell how much attention I've paid to the stuff :P
-
Using two Leatherman pliers, I twisted and pulled the shaft out of a Victorinox glasses screwdriver. Then I reamed the hole out a little, cut a little off of the other end, then carfully widened the hole all the way through until it was big enough for a Leatherman dual-ended glasses bit. A little superglue, slide the bit through until centred, and presto!
It worked well for years, and I'm sure it's still a great tool under the enormous juniper patch it's lost in.
-
Im gonna have to try that now
Sent from my SCH-I605 using Tapatalk 4
-
The current screwdriver is easily removed, I can't see the harm in having another version with a micro Phillips available so someone can swap to it if they prefer. Let the user decide which screwdriver is most useful for their needs!
-
@Jothra said:
Using two Leatherman pliers, I twisted and pulled the shaft out of a Victorinox glasses screwdriver. Then I reamed the hole out a little, cut a little off of the other end, then carfully widened the hole all the way through until it was big enough for a Leatherman dual-ended glasses bit. A little superglue, slide the bit through until centred, and presto!It worked well for years, and I'm sure it's still a great tool under the enormous juniper patch it's lost in.
good idea bro, i will try it.i had bought lm bit-set for skeletool and dual ended small bit was useless for me till i read your message.
-
I recently received two of these eye glass screwdrivers with a couple of pairs of glasses. They are philips one end and slot on the other. The screwdriver shaft near each end is approx. 0.064 in. in diameter. I haven't tried to take them apart yet but it seems that they could be used for an inexpensive source of parts.
Search "3in1 Eyeglass Screwdriver Sunglass Watch Repair Kit with Keychain" on ebay and they will come up.
I can try to dissemble one of them if anyone is interested.
John.
-
@jcs0001 said:
I recently received two of these eye glass screwdrivers with a couple of pairs of glasses. They are philips one end and slot on the other. The screwdriver shaft near each end is approx. 0.064 in. in diameter. I haven't tried to take them apart yet but it seems that they could be used for an inexpensive source of parts.Search "3in1 Eyeglass Screwdriver Sunglass Watch Repair Kit with Keychain" on ebay and they will come up.
I can try to dissemble one of them if anyone is interested.
John.
I have been looking for something like this, thanks! ebay 1.68 for 5 of these
http://www.ebay.com/itm/130960089862?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649I ordered 4 sets of 5, for a total of $6.72
-
Happy to be of help. If you come up with a neat way to use them in a multitool/sak please let us know.
John.
-
Yes you can remove the screwdriver from those but they are quite a bit thicker and longer than both the Vic and LM mini bits.
Looking forward to seeing what you make with them.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
