Rebar Owner's Club (pic heavy)
-
I've shipped MTs to Canada and they were about $10-$15US to send. Not unreasonable at all.
-
Are there any other original LM sheaths, preferably with one or two side pockets, which fit the Rebar? I don´t like the Molle sheath it came with. Right now I carry it in a Wave leather sheath (the one with the two side pockets) but the "lock buttons" always get caught in the rubberbands of the side pockets and will damage them earlier or later. Any ideas? ???
-
@Dr. Bahn said:
Are there any other original LM sheaths, preferably with one or two side pockets, which fit the Rebar? I don´t like the Molle sheath it came with. Right now I carry it in a Wave leather sheath (the one with the two side pockets) but the "lock buttons" always get caught in the rubberbands of the side pockets and will damage them earlier or later. Any ideas? ???Besides the (semi-)obvious (get a Skinth! :D ): I use the standard Nylon sheath for my Rebar (the one that came with the Wave) and, with both sidepockets and the backpocket filled (PocketWrenchII, FenixE01, Vic Alox Vagabond) it fits quite good. It does catch the lock buttons sometimes, but not often...
-
@bmot said:
Besides the (semi-)obvious (get a Skinth! :D ): I use the standard Nylon sheath for my Rebar (the one that came with the Wave) and, with both sidepockets and the backpocket filled (PocketWrenchII, FenixE01, Vic Alox Vagabond) it fits quite good. It does catch the lock buttons sometimes, but not often...A Skinth... Why didn´t that come into my mind?!
I would need special version though (I think). :DWould it be possible to post or send me a pic of your nylon sheath, taken from above into the open sheath? Is there thick nylon (like the rest oft the sheath) between the main pocket and the two smaller, outer pockets or are they these nylon/rubber type bands, too?
Thank you!

-
@Dr. Bahn said:
Besides the (semi-)obvious (get a Skinth! :D ): I use the standard Nylon sheath for my Rebar (the one that came with the Wave) and, with both sidepockets and the backpocket filled (PocketWrenchII, FenixE01, Vic Alox Vagabond) it fits quite good. It does catch the lock buttons sometimes, but not often...
A Skinth... Why didn´t that come into my mind?!
I would need special version though (I think). :DWould it be possible to post or send me a pic of your nylon sheath, taken from above into the open sheath? Is there thick nylon (like the rest oft the sheath) between the main pocket and the two smaller, outer pockets or are they these nylon/rubber type bands, too?
Thank you!

Can't take a pic now... It's this one:
http://www.leatherman.com/905600.html#start=13
It's one piece of folded nylon, with two elastic 'tubes' on the sides, sewn in as the 'sides' of the sheath... Does that make any sense? -
@Dr. Bahn said:
Besides the (semi-)obvious (get a Skinth! :D ): I use the standard Nylon sheath for my Rebar (the one that came with the Wave) and, with both sidepockets and the backpocket filled (PocketWrenchII, FenixE01, Vic Alox Vagabond) it fits quite good. It does catch the lock buttons sometimes, but not often...
A Skinth... Why didn´t that come into my mind?!
I would need special version though (I think). :DWould it be possible to post or send me a pic of your nylon sheath, taken from above into the open sheath? Is there thick nylon (like the rest oft the sheath) between the main pocket and the two smaller, outer pockets or are they these nylon/rubber type bands, too?
Thank you!

Can't take a pic now... It's this one:
http://www.leatherman.com/905600.html#start=13
It's one piece of folded nylon, with two elastic 'tubes' on the sides, sewn in as the 'sides' of the sheath... Does that make any sense?Actually, I think it's exactly the same as the 'premium leather sheath', which I believe you have...
-
@Dr. Bahn said:
Besides the (semi-)obvious (get a Skinth! :D ): I use the standard Nylon sheath for my Rebar (the one that came with the Wave) and, with both sidepockets and the backpocket filled (PocketWrenchII, FenixE01, Vic Alox Vagabond) it fits quite good. It does catch the lock buttons sometimes, but not often...
A Skinth... Why didn´t that come into my mind?!
I would need special version though (I think). :DWould it be possible to post or send me a pic of your nylon sheath, taken from above into the open sheath? Is there thick nylon (like the rest oft the sheath) between the main pocket and the two smaller, outer pockets or are they these nylon/rubber type bands, too?
Thank you!

Can't take a pic now... It's this one:
http://www.leatherman.com/905600.html#start=13
It's one piece of folded nylon, with two elastic 'tubes' on the sides, sewn in as the 'sides' of the sheath... Does that make any sense?Actually, I think it's exactly the same as the 'premium leather sheath', which I believe you have...
Looking at the pic in your link, I guess you are right. :D Thank you anyway! :)
-
[quote author=sawman link=topic=37642.msg786682#msg786682 date=1381714009]
[quote author=CanadianLMfan link=topic=37642.msg786679#msg786679 date=1381713605]
Well, the first place I went to had the sets replaced by Supertool/Micra combos, so now I have to go to Downtown Toronto for it.No chance of trying a Fleabay seller?
Well, the whole point of getting the set is because it's $49.99.
10 dollars shipping to Canada.
or at Amazon for about the same price http://www.amazon.com/Leatherman-Rebar-Micra-Combo-Multitool/dp/B00BRYBX2W/ref=sr_1_1?ie=UTF8&qid=1381764025&sr=8-1&keywords=rebar+micra
I don't think it ships to Canada.
[/quote]
$10 shipping to Canada is not unreasonable. It's what it costs.
[/quote]Then I'll get it from downtown.
-
I purchased a BO Rebar and its awesome!! :D
-
@Keensnake said:
I purchased a BO Rebar and its awesome!! :DI'm glad you're enjoying it. It's one of my favorite MT's too! :D

-
I'm really tempted to get a BO Rebar. I don't really need one, but I sure do want one!!!! :ahhh
-
@captain spaulding said:
I'm really tempted to get a BO Rebar. I don't really need one, but I sure do want one!!!! :ahhhGo ahead, DO IT
I have no BO tools, and have always been curious, just never ended up getting one. I've heard that it tends to rub off in the hand and whatnot, so that would always keep me from pulling the trigger I guess. -
From my experience with BO LM's, you do get a little bit of the coating on your hands, yet it holds up very well on the tool. I wouldn't hesitate to get a BO Rebar

-
@captain spaulding said:
I'm really tempted to get a BO Rebar. I don't really need one, but I sure do want one!!!! :ahhh
Go ahead, DO IT
I have no BO tools, and have always been curious, just never ended up getting one. I've heard that it tends to rub off in the hand and whatnot, so that would always keep me from pulling the trigger I guess.One wash and you don't have to worry about it rubbing off on your hands anymore. Just saying.

-
When I got my BO Rebar I cleaned it up with some kitchen paper and since then I don´t have got black fingers anymore.

-
Thanks for the tips on the BO business fellas
I know what you're trying to do though... >:D -
Yeah, I don't know what came over me. I've never seen any enablers here, or been one myself

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
