The 30-Day Rebar Challenge!
-
The Rebar will definitely survive this challenge.

-
@JAfromMn said:
Your rebar is holding up great.I am starting to think that the stainless steel finish is the way to go for work tools.
all that wire work would mess up a bo tool for sure.
True, unless you think of scratched black oxide as adding patina. I know I love scratches on tools. Not that I have much of a choice.
@CanadianLMfan said:
The Rebar will definitely survive this challenge.
Probably, but when I need to get into heavy prying, I'll have to watch the prybar/slot driver. I broke one completely out of my Wave a couple years ago.
-
As promised: 3-2-1, I'm the booooo-ooooomb!

It looks jet black in person. The light levels are awful in this shot.Day 9 is, unfortunately, photo-free. Darn and shucks heck!
Anywayne, Val's still on Reaming Squad, and is actually moving up in the ranks! We needed five holes drilled in a piece of 1/2" plywood so we could wire it into an old bassinet as reinforcement (so we can stick a 10-year-old in there. Classy?) The drill was in a far-off basement. So I found something about in-line locking Rebar reamers: they kick ass. The holes were all completely done in less than a minute. For real! I am pretty impressed.
We attached the wood with tie wire, because when all you have is a hammer, every problem needs tie wire (I think that's how the saying goes). Val is already famous around here for fantastic wire cutting and tying feats.
The pliers also bent two bungee strap hooks together to link the straps into the Bungeezord. Industrial-grade bungee hooks require a hammer (or at least a damn lot of plier force) to bend in, but the aroind-the-house type worked well with Val's pliers.
There still isn't any significant tool damage, and I'm really impressed with the reamer so far. Thanks, Rebar, for a wonderful Day 9!
-
Nice day 9
That awl is pretty beefy. -
Nice day 9
That awl is pretty beefy.You should see the ST300 awl!
you will
-
I have to admit that I have been coming to the LM sub-forum because and only because I learned Jothra was doing one of his 30-day challenges here. Keep up the good work!
-
Another great challenge!

-
I won't be doing anything until the rebar challenge is over.
I'm enjoying reading about the rebar now.
-
I won't be doing anything until the rebar challenge is over.
I'm enjoying reading about the rebar now.

you and me both
-
I bought a Rebar yesterday and it will be (ab)used as a work tool, so this is a very interesting thread to me.

-
Hmm. No news in four days. Did he break it?
-
I used my Rebar and a Vic Super Tinker to disassemble several old bed frames. Most of the nuts would have required a 1/2" (13mm to the rest of the planet) wrench and some were pretty rusted. The bolts and nuts holding the headboard on were even larger.
When I first saw the bed frames I was kicking my self in the butt for not having my Wave, because in the Wave sheath is my PocketWrench II, but the Rebar pliers handled them with no problem at all.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
